SEME-LAB FMMT92CSM_07

FMMT92CSM
GENERAL PURPOSE
PNP TRANSISTOR
IN A HERMETICALLY SEALED
CERAMIC SURFACE MOUNT
PACKAGE
MECHANICAL DATA
Dimensions in mm (inches)
0.31 rad.
(0.012)
3
2
FEATURES
0.76 ± 0.15
(0.03 ± 0.006)
2.54 ± 0.13
(0.10 ± 0.005)
0.51 ± 0.10
(0.02 ± 0.004)
1
1.91 ± 0.10
(0.075 ± 0.004)
• GENERAL PURPOSE PNP TRANSISTOR
A
0.31 rad.
(0.012)
3.05 ± 0.13
(0.12 ± 0.005)
A=
1.40
(0.055)
max.
1.02 ± 0.10
(0.04 ± 0.004)
• HERMETIC CERAMIC SURFACE MOUNT
PACKAGE
• CECC SCREENING OPTIONS
SOT23 CERAMIC
(LCC1 PACKAGE)
Underside View
PAD 1 – Base
PAD 2 – Emitter
PAD 3 – Collector
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VCBO
Collector – Base Voltage
-300V
VCEO
Collector – Emitter Voltage
-300V
VEBO
Emitter – Base Voltage
IC
Continuous Collector Current
-500mA
Ptot
Power Dissipation @ Tamb = 25°C
680mW
-5V
@ Tcase = 25°C
TjTstg
Operating and Storage Temperature
1.8W
–55 to 175°C
THERMAL CHARACTERISTICS
Parameter
Max.
Unit
Rth(j-amb) Thermal Resistance Junction to Ambient
350
°C/W
Rth(j-case) Thermal Resistance Junction to Case
80
°C/W
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5629
Issue 1
FMMT92CSM
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise stated)
Parameter
Test Conditions
Min.
Typ.
Max. Unit
IE = 0
-300
V
Collector - Emitter Breakdown Voltage IC = -1mA*
IB = 0
-300
V
V(BR)EBO
Emitter – Base Breakdown Voltage
IE = -10μA
IC = 0
-5
V
ICBO
Collector Cut-off Current
VCB = -200V
IE = 0
-0.25
IEBO
Emitter Cut-off Current
VEB = -3V
IE = 0
-0.1
VCE(sat)
Collector – Emitter Saturation Voltage
IC = -20mA
IB = -2mA
-0.5
VBE(sat)
Emitter Saturation Voltage
IC = -20mA
IB = -2mA
-0.9
IC = -1mA
VCE = -10V*
25
IC = -10mA
VCE = -10V*
40
IC = -30mA
VCE = -10V*
25
VCE = -20V
IC = -10mA
V(BR)CBO
Collector – Base Breakdown Voltage
V(BR)CEO
hFE
Static Forward Current Transfer Ratio
fT
Transition Frequency
Cobo
Output Capacitance
IC = -100μA
f = 20MHz
VCB = -20V
f = 1MHz
μA
V
—
MHz
50
6
pF
* Pulse Test: Pulse Width = 200μs, Duty Cycle ≤ 2%.
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5629
Issue 1