SB30-100SSMD MECHANICAL DATA Dimensions in mm 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 3 .6 0 (0 .1 4 2 ) M a x . 3 SCHOTTKY BARRIER DIODE IN SMD1 FOR HI–REL APPLICATIONS 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 1 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 2 FEATURES 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD1 (TO-276AB)Package 1 2 • • • • • • HERMETIC CERAMIC PACKAGE ISOLATED CASE SCREENING OPTIONS AVAILABLE OUTPUT CURRENT 30A LOW VF LOW LEAKAGE Pad 2 = Cathode Pads 1 & 3 = Anode 3 ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VRRM Peak Repetitive Reverse Voltage 100V VRSM Peak Non-Repetitive Reverse Voltage 100V VR Continuous Reverse Voltage 100V IO Output Current 30A IFSM Peak Non-Repetitive Surge Current (50Hz) 245A TSTG Storage Temperature Range TJ Maximum Operating Junction Temperature RTH(j-c) Maximum Thermal Resistance Junction To Case PD Power Dissipation -55°C to 150°C 150°C 0.5°C/W 250W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5312 Issue 2 SB30-100SSMD ELECTRICAL CHARACTERISTICS (TCASE = 25°C unless otherwise stated Parameter Test Conditions Min. VFM Forward Voltage* IRM Reverse Current* Cd Junction Capacitance *Pulse test tp=300µs Typ. Max. IF = 30A TJ = 25°C 0.8 IF = 30A TJ = 125°C 0.7 VR = 100V TJ= 25°C 2 VR = 100V TJ= 125°C 25 VR = 5V f= 1MHz 1400 Unit V mA pF δ≤2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5312 Issue 2