SDR1AHF & SDR1AHFSMS thru SDR1NHF & SDR1NHFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1 AMPS, 50 thru 1200 VOLTS 35 nsec Hyper Fast Recovery Rectifier Designer’s Data Sheet Part Number/Ordering Information 1/ SDR __ __ __ │ │ └ Screening 2/ │ │ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family SDR1AHF = 50V SDR1JHF = 600V SDR1BHF = 100V SDR1KHF = 800V SDR1DHF = 200V SDR1MHF = 1000V SDR1GHF = 400V SDR1NHF = 1200V FEATURES: • • • • • • Hyper Fast Recovery: 35 nsec maximum PIV up to 1200 Volts Hermetically Sealed Void Free Single Chip Construction For High Efficiency Applications Low Reverse Leakage TX, TXV, and Space Level Screening Available2/ Avalanche Breakdown Guaranteed Hyper Fast Recovery Replacement for 1N6620-6625 • • MAXIMUM RATINGS SDR1AHF SDR1BHF SDR1DHF SDR1GHF SDR1JHF SDR1KHF SDR1MHF SDR1NHF Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) Peak Surge Current @ TA = 25oC (8.3 ms Pulse, Half Sine Wave or equivalent Square Wave) SDR1A - 1JHF SDR1K - 1NHF Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 0.375” (Axial Lead) Junction to End Tab (Surface Mount) NOTES: Axial Leaded (__) Symbol Value Units VRRM VRWM VR 50 100 200 400 600 800 1000 1200 Volts IO 1.0 Amps IFSM Amps TOP & Tstg 25 7 -65 to +175 RθJL RθJE 35 28 o C o C/W Square Tab Surface Mount (SMS) 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0119G DOC Solid State Devices, Inc. SDR1AHF & SDR1AHFSMS thru SDR1NHF & SDR1NHFSMS 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS SDR1AHF – SDR1JHF Instantaneous Forward Voltage Drop (IF = 1 Amps, TA = 25oC, Pulsed) SDR1KHF – SDR1NHF SDR1AHF – SDR1JHF Instantaneous Forward Voltage Drop (IF = 1 Amps, TA = -55oC, Pulsed) SDR1KHF – SDR1NHF TA = 25oC Reverse Leakage Current (At Rated VR, pulsed) TA = 100oC Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) Junction Capacitance (VR = 10 VDC, TA = 25oC, f = 1 MHz) Symbol Min Max Unit VF1 –– –– Volts VF2 –– –– IR1 IR2 –– –– 3.30 3.50 3.40 3.60 5.0 200 trr –– 35 ns CJ –– 20 pF Case Outline: (Axial) Case Outline: (SMS) Volts μA DIM MIN MAX A B C D –– –– 0.027” 0.950” 0.150” 0.190” 0.033” –– DIM MIN MAX A B C D 0.134” 0.200” 0.022” 0.002” 0.153” 0.280” 0.028” –– Note: Dimensions prior to soldering. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0119G DOC