1 TC55 Series LOW DROPOUT POSITIVE VOLTAGE REGULATOR 2 FEATURES GENERAL DESCRIPTION ■ The TC55 Series is a collection of CMOS low dropout positive voltage regulators which can source up to 250mA of current with an extremely low input-output voltage differential of 380mV. The low dropout voltage combined with the low current consumption of only 1.1µA makes this part ideal for battery operation. The low voltage differential (dropout voltage) extends battery operating lifetime. It also permits high currents in small packages when operated with minimum VIN – VOUT differentials. The circuit also incorporates short-circuit protection to ensure maximum reliability. 3 PIN CONFIGURATIONS 4 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Very Low Dropout Voltage .... 120mV typ at 100mA 380mV typ at 200mA High Output Current .............. 250mA (VOUT = 5.0V) High Accuracy Output Voltage ........................ ± 2% (± 1% Semicustom Version) Wide Output Voltage Range .................... 2.1V-6.0V Low Power Consumption ................... 1.1µA (Typ.) Low Temperature Drift ................... ± 100ppm/°C Typ Excellent Line Regulation ..................... 0.2%/V Typ Package Options ....................................SOT-23A-3 SOT-89-3 TO-92 Short Circuit Protected Standard 3.0V, 3.3V and 5.0V Output Voltages Custom Voltages Available from 2.1V to 6.0V in 0.1V Steps. *SOT-23A-3 SOT-89-3 TO-92 VIN 1 2 3 2 APPLICATIONS TC55 TC55 TC55 1 3 1 2 3 GND VOUT GND VIN VOUT 5 VOUT Battery-Powered Devices Cameras and Portable Video Equipment Pagers and Cellular Phones Solar-Powered Instruments Consumer Products GND VIN ■ ■ ■ ■ ■ *SOT-23A-3 is equivalent to EIAJ (SC-59) ORDERING INFORMATION FUNCTIONAL BLOCK DIAGRAM PART CODE VIN VOUT TC55 RP XX X X X XX XXX Output Voltage: Ex: 21= 2.1V; 60 = 6.0V 6 Extra Feature Code: Fixed: 0 + Tolerance: 1 = ±1.0% (Custom) 2 = ±2.0% (Standard) – Temperature: E: – 40°C to +85°C Short-circuit Protection Voltage Reference GND 7 Package Type and Pin Count: CB: SOT-23A-3 (Equivalent to EIAJ (SC-59)) MB: SOT-89-3 ZB: TO-92-3 Taping Direction: Standard Taping Reverse Taping No suffix: TO-92 Bulk 8 TC55-20 11/8/96 TELCOM SEMICONDUCTOR, INC. 4-127 LOW DROPOUT POSITIVE VOLTAGE REGULATOR TC55 Series ABSOLUTE MAXIMUM RATINGS* Item Code Ratings Units Input Voltage VIN +12 V Output Current IOUT Pd/(VIN – VOUT) mA Output Voltage VOUT (VSS – 0.3) to (VIN + 0.3) V Pd 240 400 440 mW Operating Temperature Range TA – 40 to +85 °C Storage Temperature Range Tstg – 65 to +150 °C Power Dissipation: (TA ≤ 70°C) SOT-23A-3 SOT-89 TO-92 TC55RP50 ELECTRICAL CHARACTERISTICS: VOUT(S) = 5.0V, TA = 25°C unless otherwise specified (see REMARKS). Symbol Parameter Test Conditions Min Typ Max Unit VOUT(A) Output Voltage Maximum Output Current Load Regulation I/O Voltage Difference ISS VOUT(A)·100 ∆VIN·VOUT(S) VIN ∆VOUT(A)·106 VOUT(S)·∆TA Current Consumption Voltage Regulation — 4.90 250 — — — — — — 5.0 — 40 120 380 1.1 0.2 — 5.10 — 80 300 600 3.0 0.3 V IOUTmax ∆VOUT Vdif IOUT = 40mA VIN = 6.0V VIN = 6.0V, VOUT(A) ≥ 4.5V VIN = 6.0 V, 1 mA ≤ IOUT ≤ 100mA IOUT = 100mA IOUT = 200 mA VIN = 6.0V IOUT = 40mA 6.0V ≤ VIN ≤ 10.0V µA %/V — — — ±100 10.0 — V ppm/°C — 0.5 — % REMARKS: Input Voltage Temperature Coefficient of Output Voltage Long Term Stability IOUT = 40mA – 40°C ≤ TA ≤ 85°C TA = 125°C, 1000 Hours mA mV mV VOUT(S): Preset value of Output voltage VOUT(A): Actual value of Output voltage Vdif: Definition of I/O voltage difference = {VIN1 – VOUT(A)} VOUT(A): Output Voltage when IOUT is fixed and VIN = VOUT(S) + 1.0V VIN1: Input Voltage when the output voltage is 98% VOUT(A) TC55RP40 ELECTRICAL CHARACTERISTICS: VOUT(S) = 5.0V, TA = 25°C unless otherwise specified (see REMARKS). Symbol Parameter VOUT(A) Output Voltage IOUTmax ∆VOUT Vdif Maximum Output Current Load Regulation I/O Voltage Difference ISS ∆VOUT(A)·100 ∆VIN·VOUT(S) VIN ∆VOUT(A) VOUT(S)·∆TA Current Consumption Voltage Regulation 4-128 Input Voltage Temperature Coefficient of Output Voltage Long Term Stability Test Conditions Min Typ Max Unit IOUT = 40mA VIN = 5.0V VIN = 5.0V, VOUT(A) ≥ 3.6V VIN = 5.0 V, 1 mA ≤ IOUT ≤ 100mA IOUT = 100mA IOUT = 200mA VIN = 5.0V IOUT = 40mA 5.0V ≤ VIN ≤ 10.0V — 3.92 200 — — — — — — 4.0 — 45 170 400 1.0 0.2 — 4.08 — 90 330 630 2.9 0.3 V µA %/V — — — ±100 10.0 — V ppm/°C — 0.5 — % IOUT = 40mA – 40°C ≤ TA ≤ 85°C TA = 125°C, 1000 Hours mA mV mV TELCOM SEMICONDUCTOR, INC. LOW DROPOUT POSITIVE VOLTAGE REGULATOR 1 TC55 Series TC55RP30 ELECTRICAL CHARACTERISTICS: VOUT(S) = 5.0V, TA = 25°C unless otherwise specified (see REMARKS). Symbol Parameter Test Conditions Min Typ Max Unit VOUT(A) Output Voltage Maximum Output Current Load Regulation I/O Voltage Difference ISS VOUT(A)·100 ∆VIN·VOUT(S) VIN ∆VOUT(A)·106 ∆TA·VOUT(S) Current Consumption Voltage Regulation — 2.94 150 — — — — — — 3.0 — 45 180 400 0.9 0.2 — 3.06 — 90 360 700 2.8 0.3 V IOUTmax ∆VOUT Vdif IOUT = 40mA VIN = 4.0V VIN = 4.0V, VOUT(A) ≥ 2.7V VIN = 4.0V, 1 mA ≤ IOUT ≤ 80mA IOUT = 80mA IOUT = 160mA VIN = 4.0V IOUT = 40mA 4.0V ≤ VIN ≤ 10.0V µA %/V — — — ±100 10.0 — V ppm/°C — 0.5 — % Input Voltage Temperature Coefficient of Output Voltage Long Term Stability IOUT = 40mA – 40°C ≤ TA ≤ 85°C TA = 125°C, 1000 Hours 2 mA mV mV *Static-sensitive device. Unused devices must be stored in conductive material. Protect devices from static discharge and static fields. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to Absolute Maximum Rating Conditions for extended periods may affect device reliability. 3 4 MARKING SOT-23A-3 ① ➁ ➂ ➃ TO-92-3 SOT-89-3 ➁ ➃ ① ➂ 5 1 2 3 4 5 6 7 8 9 10 11 12 a represents first voltage digit 2 3 4 5 6 3 ex: 3.xV = uuuu a, b, c & d = 55RP (fixed) b represents first decimal place voltage (x.0 - x.9) A = x.0 E = x.4 L = x.8 B = x.1 F = x.5 M = x.9 C = x.2 H = x.6 D = x.3 K = x.7 3 E ex: 3.4V = uuuu f = first voltage decimal (0-9) c represents Polarity 0 = Positive (fixed) i, j, k & l = assembly lot number 6 e = first voltage digit (2-6) g = extra feature code : fixed : 0 7 h = regulation accuracy 1 = ±1.0% (custom), 2 = ±2.0% (standard) d represents assembly lot number 8 TELCOM SEMICONDUCTOR, INC. 4-129