WILLAS Dual Series Switching Diode BAV99 • RoHS product for packing code suffix "G", . Halogen free product for packing code suffix "H" • Weight: 0.008g DEVICE MARKING ORDERING INFORMATION Device . BAV99 Marking Shipping A7 3000 Tape & Reel 1 ANODE 2 CATHODE 3 CAHODE/ANODE SOT–23 MAXIMUM RATINGS (EACH DIODE) Rating Reverse Voltage Symbol VR Value 70 Vdc Forward Current IF 215 mAdc V RRM 500 70 mAdc V I F(AV) 715 mA I FRM I FSM 450 mA A Peak Forward Surge Current I Repetitive Peak Reverse Voltage Average Rectified Forward Current (1) (averaged over any 20 ms period) Repetitive Peak Forward Current Non–Repetitive Peak Forward Current t = 1.0 µ s t = 1.0 ms t = 1.0 S FM(surge) Unit 2.0 1.0 0.5 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR–5 Board, (1) T A = 25°C Derate above 25°C Thermal Resistance Junction to Ambient Total Device Dissipation Alumina Substrate, (2) T A = 25°C Derate above 25°C Thermal Resistance Junction to Ambient Junction and Storage Temperature Symbol PD Max Unit 225 mW 1.8 mW/°C 556 300 °C/W mW 2.4 mW/°C 417 °C/W –65 to +150 °C R θJA PD R θJA T J , T stg ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted) (EACH DIODE) Characteristic Symbol Min Max Unit V (BR) IR 70 — –– — 2.5 30 Vdc µAdc –– 50 CD — 1.5 pF V –– — 715 855 mVdc OFF CHARACTERISTICS Reverse Breakdown Voltage(I (BR) = 100 µA) Reverse Voltage Leakage Current (V R = 70 Vdc) (V R = 25 Vdc, T J = 150°C) (V R = 70 Vdc, T J = 150°C) Diode Capacitance (V R = 0, f = 1.0 MHz) Forward Voltage (I F = 1.0 mAdc) (I F = 10 mAdc) (I F = 50 mAdc) (I F = 150 mAdc) Reverse Recovery Time (I F = I R = 10 mAdc, i R(REC) = 1.0 mAdc, R L = 100Ω ) (Figure 1) Forward Recovery Voltage (I F = 10 mA, t r = 20 ns) 1. FR–5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina. F –– 1000 –– 1250 t rr — 6.0 ns V FR — 1.75 V WILLAS BAV99 +10 V 2.0 k 820 Ω 100 µH IF 0.1 µF t tr 0.1µF IF t p t rr 10% t 90% D.U.T. 50 Ω INPUT SAMPLING OSCILLOSCOPE 50 Ω OUTPUT PULSE GENERATOR i IR INPUT SIGNAL VR R(REC) = 1.0 mA OUTPUT PULSE (I F = I R = 10 mA; MEASURED at i R(REC) = 1.0 mA) Notes: 1. A 2.0 kΩ variable resistor adjusted for a Forward Current (I F ) of 10mA. Notes: 2. Input pulse is adjusted so I R(peak) is equal to 10mA. Notes: 3. t p » t rr Figure 1. Recovery Time Equivalent Test Circuit CURVES APPLICABLE TO EACH DIODE I R , REVERSE CURRENT (µA) 10 T A = 85°C 10 T A = – 40°C 1.0 T A = 25°C 0.1 T A = 150°C T A = 125°C 1.0 T A = 85°C 0.1 T A = 55°C 0.01 T A = 25°C 0.001 0.2 0.4 0.6 0.8 1.0 0 1.2 10 20 40 Figure 3. Leakage Current Figure 2. Forward Voltage 0.68 0.64 0.60 0.56 0.52 0 30 V R , REVERSE VOLTAGE (VOLTS) V F , FORWARD VOLTAGE (VOLTS) C D ,TOTAL CAPACITANCE (pF) I F , FORWARD CURRENT (mA) 100 2 4 6 V R , REVERSE VOLTAGE (VOLTS) Figure 4. Capacitance 8 50 WILLAS BAV99 SOT-23 NOTES: A 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. L 3 1 V 2 B S DIM G A B C D G H J K L S V C D H K J INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 PIN 1. ANODE 2. CAHODE 3. CAHODE/ANODE 0.037 0.95 0.037 0.95 0.079 2.0 0.035 0.9 0.031 0.8 inches mm MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60