WBP13007-K or High Voltage Fast-Sw t-Swiitching NPN Power Transist sto Features ■ Very High Switching Speed ■ High Voltage Capability ■ Wide Reverse Bias SOA B C General Description TO220 E This device is designed for high voltage, High speed switching characteristics required such as lighting system ,switching mode power supply. Absolute Maximum Ratings Symbol Parameter Test Conditions Value Units VCES Collector-Emitter Voltage VBE = 0 700 V VCEO Collector-Emitter Voltage IB = 0 400 V VEBO Emitter-Base Voltage IC = 0 9.0 V IC Collector Current 8.0 A ICP Collector pulse Current 16 A IB Base Current 4.0 A IBM Base Peak Current 8.0 A PC tP = 5ms Total Dissipation at Tc = 25℃ 80 Total Dissipation at Ta = 25℃ 2.05 W TJ Operation Junction Temperature - 40 ~ 150 ℃ TSTG Storage Temperature - 40 ~ 150 ℃ Tc: Case temperature (good cooling) Ta:Ambient temperature (without heat sink) Thermal Characteristics Symbol Parameter Value Units RθJc Thermal Resistance Junction to Case 1.56 ℃/W RθJA Thermal Resistance Junction to Ambient 62.5 ℃/W Rev.A Feb.2011 Copyright@Winsemi Microelectronics Co., Ltd., All right reserved. WBP13007-K Electrical Characteristics (TC=25℃ unless otherwise noted) Symbol VCEO(sus) Parameter Test Conditions Collector-Emitter Breakdown Voltage Ic=10mA,Ib=0 Value Min 400 Typ Max - VCE(sat) Collector-Emitter Saturation Voltage - - 1.5 V 2.0 Ic=8.0A,Ib=2.0A Ic=5.0A,Ib=1.0A V 1.0 Ic=2.0A,Ib=0.4A Ic=5.0A,Ib=1.0A - Units - - 2.5 - - - - - - 8 - 40 5 - 40 1.5 3.0 0.17 0.4 V Tc=100℃ Ic=2.0A,Ib=0.4A 1.2 Ic=5.0A,Ib=1.0A VBE(sat) 1.6 V Base-Emitter Saturation Voltage Ic=5.0A,Ib=1.0A 1.5 V Tc=100℃ Collector-Base Cutoff Current ICBO (Vbe=-1.5V) Vcb=700V, Tc=100℃ Vce=5V,Ic=2.0A DC Current Gain hFE 1.0 Vcb=700V Vce=5V, Ic=5.0A Resistive Load ts Storage Time tf Fall Time VCC=125V , IB1=1.0A , Tp=25㎲ Inductive Load ts Storage Time tf Fall Time Inductive Load ts Storage Time tf Fall Time Ic=5.0A IB2=-1.0A 5.0 mA - V cc =15V ,Ic=5A IB1=1.0A , IB2=-2.5A L=0.35mH,Vclamp=300V - 0.8 2.0 - 0.06 0.12 VCC=15V ,Ic=1A IB1=0.4A , IB2=-1.0A L=0.35mH,Vclamp=300V Tc=100℃ - 1.0 3.0 - 0.07 0.15 ㎲ ㎲ ㎲ e: Not Note Pulse Test : Pulse width 300, Duty cycle 2% 2/5 Steady, keep you advance WBP13007-K Fig. 1 DC Current Gain Fig. 2 Collector-Emitter Saturation Voltage Fig. 3 Base--Emitter Saturation Voltage Fig.5 Power Derating Fig. 4 Safe Operation Area Fig.6 Reverse Biased Safe Operation Area 3/5 Steady, keep you advance WBP13007-K Resistive Load Switching TestCircuit Inductive Load Switching & RBSOA Test Circuit 4/5 Steady, keep you advance WBP13007-K 220 Pack age Di mension TOO-220 acka Dim Uni Unitt:mm 5/5 Steady, keep you advance