a2460 general features The a2460 is a monolithic high voltage MOSFET and IGBT driver with independent high and low side output channels for half bridge configuration. The bridge can work in systems with positive and negative high voltage bridge supplies. Single chip solution Gate drive supply range from 12 to 15V TTL and CMOS compatible input logic with pull-down High and low side output in phase with IN Floating channel designed for bootstrap operation Enable input turns off low and high side channel Undervoltage detection for low and high side channel Possibility for half bridge driving with positive and negative bridge supply voltage Different bridge supply voltage up to 600V Shot through prevention Ambient temperature range -25°C ... +85°C Package – SOP-14 example application schematic VB VDD PWM_H_IN INH PWM_L_IN INL 250V OH VS PW_OUT a2460 EN EN VCC 15V OL 15V GND VNN Fig.1: Application with positive and negative bridge voltage 250V VB VDD PWM_H_IN INH PWM_L_IN INL OH VS PW_OUT a2460 EN VCC EN 15V OL 500 V 15V VNN GND Fig.2: Application with negative bridge voltage VB VDD PWM_H_IN INH PWM_L_IN INL OH VS PW_OUT a2460 EN EN VCC 15V OL 15V GND VNN Fig.3: Application with positive bridge voltage 600V