P-511-475(V:3) PD080SL3 Version : 3.0 TECHNICA L SP ECIFICATION MO DE L NO : PD080SL3 T he content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer’ s Confirmation Customer Date By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA 92656 Http://www.AZDISPLAYS.com PVI ’ s Confirmation Confirmed By Prepared By The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 P-511-475(V:3) PD080SL3 Revision History Rev. Eng. Issued Date 0.1 Sarah Huang Oct 29, 2007 1.0 Sarah Huang Jan 08, 2008 2.0 Sarah Huang Feb 25, 2008 3.0 ᑉሎ Aug,20,2008 Revised Content Preliminary Add Page 25 15.Packing Modify Page10 7. Electrical Characteristics: VIH from 0.7VCC~VCC to 0.7VDD~VDD VIL from 0~0.2VCC to 0~0.2VDD Add Page 23 13.Handling Cautions The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 P-511-475(V:3) PD080SL3 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ITEM Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Connections and Functions for Interface Pins Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Colors and Input Data Signals Input signal timing Power On Sequence Optical Characteristics Handling Cautions Reliability Test Packing PAGE 1 2 3 4 4 4 5 7 10 10 11 12 15 19 19 23 24 25 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 P-511-475(V:3) PD080SL3 1.Application This data sheet applies to a color TFT LCD module; PD080SL3.The module applies to notebook PC, sub-note-book PC and other OA product, which require high quality flat panel display. Prime View assumes no responsibility for any damage resulting from the use of the device which dose not complies with the instructions and the precautions in these specification sheets. 2. Features . Amorphous silicon TFT LCD panel with LED backlight unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display ColorsΚ262,144 colors or 16,777,216 colors . Backlight driving DC/AC inverter not included in this module 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 8 (diagonal) 800ͪ(RGB)ͪ600 262,144 162(H)ͪ121.5 (V) 0.2025 (H)ͪ0.2025 (V) Stripe 200(W)Ø152(H)Ø10.5(D) (typ.) 343+15 42-LED Anti-Glare+ SWV Normally white 6 (Note 12-1) Unit inch dot mm mm mm g o’clock The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 P-511-475(V:3) PD080SL3 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 P-511-475(V:3) PD080SL3 DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB always High or Low. ˋ˃˃ʳ̇˶ ˉˇ˃ʳ̇˶ ˗˘ˡ˕ (tc: the period of sampling clock) 6. Absolute Maximum Ratings Parameters Supply Voltage Input Signals Voltage Note 6-1: LVDS signal. Symbol VDD VIN MIN. -0.3 -0.3 MAX. +4.0 VDD+0.3 GND=0V, Ta=25ʚ Unit Remark V V Note 6-1 7. Electrical Characteristics 7-1) Recommended Operating Conditions: GND = 0VΔTa = 25к Item Symbol Min. Typ. Max. Unit Remark Supply Voltage VDD 3.0 3.3 3.6 V 153 mA Note 7-1 Current Dissipation IDD 0.46 0.51 0.56 W Total power consumption PDD LVDS Differential input high threshold VTH 100 mV Note 7-2 LVDS Differential input low threshold VTL -100 Input voltage for DPS & FPC High VIH 0.7 VDD V VDD signal Low VIL 0 0.2 VDD V Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below. 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black IDD current dissipation testing pattern Note7-2 : Please refers to THC63LVDM83A specification by Thin Corporation. This LCD module conforms to LVDS standard. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:10 P-511-475(V:3) PD080SL3 7-2) Recommended Driving Condition for Back Light Ta = 25к Remark Note 7-3 Note 7-4 Note 7-3/7-5 Parameter Symbol Min TYP MAX Unit Supply voltage of LED backlight VLED (11) V Supply current of LED backlight ILED 20 mA Backlight Power Consumption PLED 3.08 W Note 7-3 : ILED= 20mA,constant current Note 7-4 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 14 = 280mA Note 7-5 : PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-13 * ILED-13+VLED-14 * ILED-14 VLED-1 VLED-2 Anode Cathode VLED-13 VLED-14 7-3) Backlight driving Connector type : BHSR-02VS-1(JST) PIN NO. 1 2 Symbol + - Description Input terminal (Anode) Input terminal (Cathode) Remark Red Black 8. Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st L ine R G B R G B R G B 2 nd Line R G B R G B 3 rd L ine R G B 1 st P ixe l 80 0 th P ixel 1 P ixe l = R G B 5 98 th L ine R G B R G B R G B 59 9 th Line R G B R G B R G B R G B 6 00 th L ine R G B R G B The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:11 P-511-475(V:3) PD080SL3 9. Display Colors and Input Data Signals The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:12 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:13 P-511-475(V:3) PD080SL3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:14 P-511-475(V:3) PD080SL3 10. Input signal timing: DENB pin have high priority than SYNC mode(HSVC+VSYNC). When IC only use SYNC pin, DENB pin have to connect to ground. (A) Timing Specifications (DENB Mode): Item Symbol Frame Cycling Period t1 Vertical Display Period t2 Horizontal Scanning Time t3 Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Set-up time t4 t5 t6 t7 t8 t9 Min. 604 X t3 14 600 X t3 920 X t5 24 800 X t5 20 9.0 9.0 4.0 5.0 Typ. 628X t3 16.58 600 X t3 1056 X t5 26.4 800 X t5 25.0 - Max. 800 X t3 20 600 X t3 1064 X t5 33 800 X t5 31.25 - Unit ms Ӵs ns ns ns ns ns Remark (B) Timing Specifications (SYNC Mode) Item HSYNC Period Symbol Hp Min. 24 920 Display period Hdp 800 Pulse width Hpw 12 Back-porch Hbp 12 Front-porch Hfp 42 Hpw+Hbp 214 Hsync-CLK Hhc 10 Vsync-Hsync Hvh 0 VSYNC Period Vp 14 (Frame cycling period) 604 Display period Vdp 600 Pulse width Vpw 2 Back-porch Vbp 0 Front-porch Vfp 1 Vpw+Vbp 27 Note 1: Frame cycling period is optimum in 16.58ms.(60HZ) Typ. 26.4 1056 800 128 86 42 214 0 16.58 628 600 4 23 1 27 Max. 33 1064 800 202 202 42 214 Tc-10 200 20 800 600 27 25 1 27 Unit us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp Remark Note 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:15 P-511-475(V:3) PD080SL3 (C)Timing Chart: t1 t2 CLK t3 t3 DENB R5~R0 G5~G0 B5~B0 X,0 X,1 X,2 X,3 X,Y X,597 X,598 X,599 tc t3 t4 CLK DENB 796,Y 798,Y R5~R0 G5~G0 B5~B0 0,Y 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y X,Y 797,Y 799,Y The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:16 P-511-475(V:3) PD080SL3 Hp ʳʳ˛˦ˬˡ˖ Hpw Hdp Hbp Hfp R,G,B valid data CLK Hhc HSYNC HSYNC Hvh VSYNC The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:17 P-511-475(V:3) PD080SL3 Vp Vpw VSYNC Vdp Vbp Vfp R,G,B valid data t5 t6 t7 ˩˜˛ʻˠ˼́ʼˍ˃ˁˋ˩˶˶ CLK ˩˜˟ʻˠ˴̋ʼˍ˃ˁ˅˩˶˶ t8 HYSNC VSYNC DENB R7-R0 G7-G0 B7-B0 t9 ˩˜˛ʻˠ˼́ʼˍ˃ˁˋ˩˶˶ VALID DATA a ˜́̃̈̇ʳ˦˼˺́˴˿ʳ ˖˸́̇˸̅˟˸̉˸˿ˍ ˃ˁˈ˩˶˶ ˩˜˟ʻˠ˴̋ʼˍ˃ˁ˅˩˶˶ b CLK ˃ˁˈ˩˶˶ Duty ( a ,b ) : 50 +10% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:18 P-511-475(V:3) PD080SL3 11.Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V ˩˗˗ Signal ˅̇ ˄ ˃ˏ̇ ˄ B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off, please keep whole signals (Hsync, Vsync, DENB, CLK, Data) low level or high impedance. 12. Optical Characteristics 12-1) Specification: Parameter Symbol ͐ Horizontal Viewing ͐(to 12 ’clock) Angle Vertical ͐(to 6 o’clock) Contrast Ratio Luminance LED Life Time Response Rise time Fall Uniformity White Chromaticity Cross Talk Ratio CR L Tr Tf U x y CTK Condition CR≥10 MIN. 55 40 55 Optimum 200 direction ͐=0°/͝=0± 390 20000 25ʚ ͐=0± ͝=0± 75 ͐=0°/͝=0± 0.28 ͐=0°/͝=0± 0.31 - Ta = 25к Remarks TYP. 60 45 60 MAX. - Unit deg deg deg 400 - - Note 12-2 420 30000 15 25 80 0.32 0.35 - 30 50 0.36 0.39 3.5 cd/ʤ hrs ms ms % % Note 12-3 Note 12-4 Note 12-1 Note 12-5 Note 12-6 Note 12-7 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:19 P-511-475(V:3) PD080SL3 The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module Optical characteristics measuring configuration Note 12-1ΚThe definitions of viewing angles are as follows. LED connector 12 o’clock θ 3 o’clock 9 o’clock φ Note 12-2 : The definition of contrast ratio ˖˥ = 6 o’clock ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳˉˆ ˟̈̀˼́˴́˶˸ʳ˴̇ʳ˺̅˴̌ʳ˿˸̉˸˿ʳ˃ Note 12-3 : Topcon BM-5A or BM-7 fast luminance meter 1̓field of view is used in the testing Note 12-4: The “LED Life time “ is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25к and ILED =20mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:20 P-511-475(V:3) PD080SL3 Note 12-5: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 12-6: The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white. 25% 50% 75% 25% 50% 75% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:21 P-511-475(V:3) PD080SL3 ⏐YA-YB⏐ ͪ100% YA YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Note 12-7: Cross Talk (CTK) = Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:22 P-511-475(V:3) PD080SL3 13. Handling Cautions 13-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and diets. d) Please following the tear off direction as figure13-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 13-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass, which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 13-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 13-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 13 -1 the way to peel off protective film The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:23 P-511-475(V:3) PD080SL3 14. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electron Static Discharge Test Condition Ta = +80к, 240 hrs Ta = -25к, 240 hrs Ta =+80к, 240 hrs Ta = -25к, 240 hrs Ta = +60к, 90%RH, 240 hrs -20к+80к, 100 Cycles 30 min 30 min FrequencyΚ10 ~ 57 HZ , AmplitudeΚ0.15 mm 58~500Hz, 1G Sweep timeΚ11 min ; Test PeriodΚ3 hrs (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction C=150pF,R=330Ө Contact=±8KVΔAir=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test [Criteria] In the standard conditions, there is not display function NG issue occurred. (Including: line defect, no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:24 P-511-475(V:3) PD080SL3 15.Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.Page:25