Compact Medium Power Amplifier for EMI/EMC Test and Measurement Applications 4 . 0 - 1 0 .0 GHz 4.0 - 10.0 GHz The VZS/X-2776L1 Series 100 W TWT Amplifier Global Applications Three rack units tall (5.25 in, 133 mm) 230 VAC operation. Meets International Safety Standard EN61010 and Electromagnetic Compatibility 2004/108/EC. Versatile Ultra-wideband, automatic fault recycle, userfriendly microprocessor-controlled logic with integrated computer interface, VSWR soft-fail protection, digital metering, quiet operation for laboratory environment. Worldwide Support Modular design and built-in fault diagnostic capability, backed by CPI’s worldwide 24-hour customer support network that includes sixteen regional factory service centers. An integral solid state pre-amplifier and IEEE interface are included as standard features. Efficient Utilizes dual-depressed collector helix traveling wave tube for maximum 1.5 kVA operation. 45 River Drive Georgetown, Ontario, Canada L7G 2J4 tel: +1 (905) 877-0161 fax: +1 (905) 877-5327 e-mail: [email protected] www.cpii.com/satcom 1 0 0 W Tr a v e l i n g Wa v e Tu b e A m p l i f i e r Compact 4 .0 - 10 .0 G H z SPECIFICATIONS, VZS/X-2776L1 Environmental (Operating) Electrical OPTIONS: Ambient Temperature -10° to +40°C operating Frequency 4.0 to 10.0 GHz Output Power TWT Flange Relative Humidity 95% non-condensing 100 W min. 70 W min. Altitude Up to 10,000 ft (3000 m) with standard adiabatic derating of 2°/1000 ft. • Input Isolator (-1 dB gain) Gain (with no options) 44 dB min. at rated power output; 40 dB typ. at small signal Shock and Vibration Designed to meet conditions normally encountered in the laboratory • Remote Control Panel RF Level Adjust 0 to 20 dB continuous Acoustic Noise 65 dBA @ 3 ft. from amplifier Gain Stability ±0.25 dB/24 hr max. (at constant drive and temp.) Mechanical Gain Variation 12.0 dB pk-pk max., typ. Cooling (TWT) Input VSWR 2.5:1 typ. 1.5:1 max. (with optional input isolator) Forced air with integral blower. Rear air intake and exhaust. RF Input Connection Type N female Output VSWR 2.5:1 typ. RF Output Connection Type N female Load VSWR 1.5:1 max. for full spec compliance; 2.0:1 max. continuous operation; any value without damage RF Output Monitor Type-N female, -57 dB nom. Dimensions (W x H x D) 19 x 5.25 x 24 in. (483 x 133 x 610 mm) -50 dBc below 10 kHz; -20 [1.3 + log F (kHz)] dBc, 10 kHz to 500 kHz; -80 dBc above 500 kHz Weight 70 lbs (32 kg) Safety EN61010 • 115 VAC External Step-Up Transformer Residual AM Phase Noise Meets IESS-308/309 with 3 dB margin Noise Figure 15 dB max. Harmonic Content -3 dBc typical at lower band edge, decreasing to -15 dBc typ. at upper band edge Primary Power 220-240 VAC ±10%, single phase, 47-63 Hz Power Consumption 1.4 kVA typ. 1.5 kVA max. Inrush Current 200% max. Certificate Number: 30515 Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 234, ISSUE 1 03/08 PDF