CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 1/8 Dual N-CHANNEL ENHANCEMENT MODE POWER MOSFET MTB17A03Q8 Description The MTB17A03Q8 provides the designer with the best combination of fast switching, ruggedized device design, ultra low on-resistance and cost effectiveness. The SOP-8 package is universally preferred for all commercial-industrial surface mount applications and suited for low voltage applications such as DC/DC converters. Features • RDS(ON)=15mΩ(max.)@VGS=10V, ID=10A • Simple drive requirement • Low on-resistance • Fast switching speed • Dual N-ch MOSFET package • Pb-free & Halogen-free package Equivalent Circuit Outline MTB17A03Q8 SOP-8 Pin 1 G：Gate S：Source D：Drain MTB17A03Q8 CYStek Product Specification Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 2/8 CYStech Electronics Corp. Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Limits Drain-Source Voltage Gate-Source Voltage Continuous Drain Current, TC=25 °C Continuous Drain Current, TC=100 °C Pulsed Drain Current (Note 1) Avalanche Current Avalanche Energy @ L=0.1mH, ID=10A, RG=25Ω Repetitive Avalanche Energy @ L=0.05mH (Note 2) TA=25°C (Note 3) Power Dissipation TA=100°C Operating Junction and Storage Temperature Range VDS VGS ID ID IDM IAS EAS EAR 30 ±20 10 7 40 12 5 2.5 2.4 1.2 -55~+175 PD Tj ; Tstg Unit V A mJ W °C 100% UIS testing in condition of VD=15V, L=0.1mH, VG=10V, IL=7.5A, Rated VDS=30V N-CH Thermal Data Parameter Thermal Resistance, Junction-to-case, max Thermal Resistance, Junction-to-ambient, max Symbol Rth,j-c Rth,j-a Value 25 62.5 *3 Note : 1. Pulse width limited by maximum junction temperature 2. Duty cycle≤1% 3. Surface mounted on 1 in² copper pad of FR-4 board, 125°C/W when mounted on minimum copper pad Unit °C/W °C/W Characteristics (Tj=25°C, unless otherwise specified) Symbol Min. Typ. Max. Unit 30 1 10 - 1.5 18 13 20 3 ±100 1 25 15 25 V V S nA - 11 6 1.2 3.3 11 16 36 20 - Test Conditions Static BVDSS VGS(th) GFS *1 IGSS IDSS ID(ON) *1 *RDS(ON) *1 Dynamic Qg (VGS=10V) *1, 2 Qg (VGS=4.5V) *1, 2 Qgs *1, 2 Qgd *1, 2 td(ON) *1, 2 tr *1, 2 td(OFF) *1, 2 tf *1, 2 MTB17A03Q8 - - μA A mΩ VGS=0, ID=250μA VDS = VGS, ID=250μA VDS =5V, ID=10A VGS=±20 VDS =24V, VGS =0 VDS =20V, VGS =0, Tj=125°C VDS =10V, VGS =10V VGS =10V, ID=10A VGS =4.5V, ID=6A nC ID=10A, VDS=15V, VGS=10V ns VDS=15V, ID=1A,VGS=10V, RG=6Ω, RD=15Ω CYStek Product Specification CYStech Electronics Corp. Ciss Coss Crss Rg Source-Drain Diode IS *1 ISM *3 VSD *1 trr Qrr - 1115 116 82 2 - - 50 2 2.3 9.2 1.2 - Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 3/8 pF VGS=0V, VDS=15V, f=1MHz Ω VGS=15mV, VDS=0V, f=1MHz A V ns nC IF= IS, VGS=0V IF= IS, dI/dt=100A/μs Note : *1.Pulse Test : Pulse Width ≤300μs, Duty Cycle≤2% *2.Independent of operating temperature *3.Pulse width limited by maximum junction temperature. Ordering Information Device MTB17A03Q8 MTB17A03Q8 Package SOP-8 (Pb-free & Halogen-free package) Shipping Marking 2500 pcs / Tape & Reel B17A03 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 4/8 Characteristic Curves MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 5/8 Characteristic Curves(Cont.) MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 6/8 Reel Dimension Carrier Tape Dimension MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 7/8 Recommended wave soldering condition Product Pb-free devices Peak Temperature 260 +0/-5 °C Soldering Time 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Average ramp-up rate (Tsmax to Tp) Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) Time maintained above: −Temperature (TL) − Time (tL) Peak Temperature(TP) Time within 5°C of actual peak temperature(tp) Ramp down rate Time 25 °C to peak temperature Sn-Pb eutectic Assembly Pb-free Assembly 3°C/second max. 3°C/second max. 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds 183°C 60-150 seconds 240 +0/-5 °C 217°C 60-150 seconds 260 +0/-5 °C 10-30 seconds 20-40 seconds 6°C/second max. 6 minutes max. 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. MTB17A03Q8 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C729Q8 Issued Date : 2009.07.01 Revised Date : Page No. : 8/8 SOP-8 Dimension Right side View G Top View A Marking: I C B H Device Name Date Code J E D K Front View Part A Part A M L N 8-Lead SOP-8 Plastic Package CYStek Package Code: Q8 O F *: Typical Inches Min. Max. 0.1850 0.2007 0.1457 0.1614 0.2283 0.2441 0.0500* 0.0130 0.0201 0.1472 0.1527 0.0472 0.0638 0.1889 0.2007 DIM A B C D E F G H Millimeters Min. Max. 4.70 5.10 3.70 4.10 5.80 6.20 1.27* 0.33 0.51 3.74 3.88 1.20 1.62 4.80 5.10 DIM I J K L M N O Inches Min. Max. 0.0031 0.0110 0.0157 0.0323 0.0074 0.0102 0.0145 0.0204 0.0118 0.0197 0.0031 0.0051 0.0000 0.0059 Millimeters Min. Max. 0.08 0.28 0.40 0.83 0.19 0.26 0.37 0.52 0.30 0.50 0.08 0.13 0.00 0.15 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead: pure tin plated • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. MTB17A03Q8 CYStek Product Specification