N Series N Type Connectors ●N series is the most practical coaxial cable con- nectors for 7mm (inner diameter of outer conductor) of 50Ω group. ●High frequency performance is superior. ●Many types of connectors are available to satisfy various cable requirements. Note: N series (50 Ω group) is not intermateable with NC series. (75Ω group) CONFORMING STANDARD JIS-C-5411、 MIL-C-39012 SPECIFICATION Characteristic Impedance 50Ω Dielectric withstanding voltage 1500V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 3mΩ max. VSWR 1.3max. at DC～3GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Silver or Nickel plating Contact (male) Copper alloy/Silver or Gold plating Contact (female) Copper alloy/Silver or Gold plating Insulators PTFE Gaskets Silicone rubber Please ask us for the cable assemblies to assure its performance. ● 1 ● N Series Unit : mm ■ Straight Plug Clamp Type φA φ21 P/N N-P-3 N-P-3-Ni （L） N-P-3-NiCAu N-P-3W N-P-3W-Ni N-P-3W-D1 N-P-55U N-P-55U-Ni N-P-58U N-P-58U-Ni-1 N-P-58U-NiCAu φA φ21 P/N (L) N-SP-3.5DFE N-P-5 N-P-5-Ni N-P-5W N-P-5W-Ni N-P-5W-NiCAu N-P-5DFB-1 N-SP-5DEFAE N-SP-5DSFA N-P-5U N-P-5U-NiCAu N-P-8U N-P-8U-D1 ※ N-P-8U-Ni N-P-8U-NiCAu UG-21D/U Applicable Cable （L） 6.2 44.6 Ag Ag 6.2 44.6 Ni Ag 6.2 44.6 Ni Au 7.2 44.6 Ag Ag 7.2 44.6 Ni Ag 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V 3C-2W 3D-2W 3C-2W 3D-2W 3C-2W 3D-2W RG-55/U RG-55/U RG-58/U RG-58/U RG-58/U 7.2 44.6 Ni Au 5.4 5.4 5.4 5.4 5.4 44.6 44.6 44.6 44.6 44.6 Ag Ni Ag Ni Ni Ag Ag Ag Ag Au Applicable Cable φA （L） 6.2 41.5 Ni Au 8.6 44.0 Ag Ag 8.6 44.0 Ni Ag 9.1 46.0 Ag Ag 9.1 46.0 Ni Ag 9.1 46.0 Ni Au 8.1 44.0 Ni Ag 8.6 41.5 Ni Au 8.6 9.2 9.2 41.5 45.0 45.0 Ni Ag Ni Au Ag Au 11.2 44.0 Ag Ag 11.2 45.6 Ag Ag 11.2 44.0 Ni Ag 11.2 44.0 Ni Au 11.2 38.0 Ag Ag 3.5D-FE 3.5D-QEFA 5C-2V 5D-2V 5C-2V 5D-2V 5C-2W 5D-2W 5C-2W 5D-2W 5C-2V 5D-2V 5D-FB 5D-FAE 5D-EFAE 5D-SFA RG-5/U RG-5/U RG-8/U RG-9/U RG-8/U RG-9/U RG-8/U RG-9/U RG-8/U RG-9/U RG-8/U RG-9/U ※ N-P-8U with boot ● 2 ● Finish Shell Contact φA Finish Shell Contact N Series Unit : mm ■ Straight Plug Clamp Type φA φ21 P/N Applicable Cable φA （L） 8D-2V 12.6 38.0 N-P-8-1-Ni 8D-2V 12.6 N-P-8W 8D-2W 13.0 N-P-8W-Ni 8D-2W 13.0 N-P-8W-D1 8D-2W 13.0 N-P-8DFB-1 8D-FB 11.8 N-P-8-1 (L) φA φ22.2 P/N N-P-10 N-P-10-Ni （51.7） φ23.3 φ7.2 10C-2V 10D-2V 10C-2V 10D-2V φA Shell Contact Ag Ag 38.0 Ni Ag 39.0 Ag Ag 39.0 Ni Ag 39.0 Ni Au 38.0 Ni Ag Finish Shell Contact 14.2 Ag Ag 14.2 Ni Ag N-P-10W 10D-2W 15.2 Ag Ag N-P-10DFB-1 10D-FB 14.2 Ni Ag P/N φ17.5 Applicable Cable Finish N-SP-3D2W-1 (42.5) ● 3 ● Applicable Cable 3C-2W 3D-2W Finish Shell Contact Ni Au N Series Unit : mm ■ Straight Plug Clamp Type Applicable Cable P/N φ23.3 (L) 6.2 Finish Shell Contact 41.5 Ni Au 6.2 41.5 Ni Au 6.2 41.5 Ag Ag 8.6 41.5 Ni Au 8D-SFA 11.7 50.7 Ni Au N-SP-8DSFA-D1 8D-SFA 11.7 50.7 Ni Ag N-SP-10DSFA 10D-SFA 13.7 61.6 Ni Au N-SP-3DFAE φA φA 3D-FAE 3.5D-QEFA 3.5D-QEFE N-SP-3.5DQEFA NH-3.5D-QEFE (L) 3.5D-QEFA N-SP-3.5DQEFA-D1 3.5D-QEFE NH-3.5D-QEFE 5D-SFA N-SP-5DSFA-S 5D-SFA(PE) NH-5D-SFA N-SP-8DSFA φ29 φ16.4 φ23.3 P/N N-SP-12DSFA Finish Applicable Cable Shell Contact Ni Au 12D-SFA (59.3) φ11.5 φ18 P/N N-SP-F/F8D （45.8） N-SP-F/F8D-D1 N-SP-F/F8D-D2 Applicable Cable Finish Shell Contact Ni Au Ag Ag Ni Ag F/F-8D NH-F/F-8D F/F-8D NH-F/F-8D F/F-8D NH-F/F-8D φA φ21 Crimp Type P/N N-P-3D2V-CR20 （L） Comfiguration for P/N N-P-5D2V-CR20 N-P-5D2V-CR20 N-SP-5DSQFB-CR1 N-SP-5DSFA-CR1-1 N-P-58U-CR10 ● 4 ● Applicable Cable 3D-2V 3D-LFV Finish Shell Contact Hand Crimp Tool P/N 35.0 Ni Ag CR-H-1152 φA （L） 7.1 5D-2V 9.5 37.2 Ni Ag CR-H-1130 5D-SQFB 9.5 37.0 Ni Au CR-H-16768 5D-SFA 9.5 37.0 Ni Au CR-H-16768 RG-58A/U 6.3 32.0 Ni Au CR-H-1105 N Series Unit : mm ■ Right Angle Plug Clamp Type φA φ17.5 (L2) φ21 P/N Applicable Cable φA (L1) (L2) N-LP-58U RG-58/U 5.4 52.9 35.0 N-LP-58U-Ni RG-58U 5.4 52.9 N-LP-55U RG-55/U 5.4 52.9 6.2 Shell Contact Ag Ag 35.0 Ni Ag 35.0 Ag Ag 52.9 34.0 Ag Ag 6.2 52.9 34.0 Ni Ag Applicable Cable φA (L1) (L2) Shell Contact N-LP-5 5D-2V 8.6 53.0 34.0 Ag Ag N-LP-5-Ni 5D-2V 8.6 53.0 34.0 Ni Ag 9.2 52.9 34.0 Ag Ag 9.2 52.9 34.0 Ni Ag 3C-2V N-LP-3 3D-2V (L1) 3C-2V N-LP-3-Ni φ21 (L2) P/N φA N-LP-5W N-LP-5W-Ni (L1) 3D-2V 5C-2W 5D-2W 5C-2W 5D-2W 8D-2W 13.0 50.0 35.0 Ag Ag N-LP-8D2W-D1 8D-2W 13.0 50.0 35.0 Ni Ag (34.9) φ17.5 P/N φ11.2 Finish N-LP-8D2W φ21 N-LP-8U N-LP-8U-Ni (47.0) Finish N-LP-8U-CAuNi Applicable Cable Finish Shell Contact Ag Ag Ni Ag Ni Au RG-8U RG-9/U RG-8U RG-9/U RG-8U RG-9/U φ21 Applicable Cable φA N-LP-10V 10D-2V N-LP-10W N-LP-10DFB (33.3) φA Finish Shell Contact 14.1 Ag Ag 10D-2W 15.2 Ag Ag 10D-FB 14.2 Ni Ag P/N Applicable Cable Shell Contact Hand Crimp Tool P/N N-LP-5DSFA-CR1-1 5D-SFA Ni Au CR-H-16768 (53.0) φ21 Crimp Type (34) φ22.2 P/N φ9.5 (32) ● 5 ● Finish N Series Unit : mm ■ Straight Jack Clamp Type Applicable Cable (L) N-SJ-142BU RG-142B/U N-SJ-55AU RG-55A/U P/N Applicable Cable φA φ11 P/N Finish Shell Contact 37.7 Ni Ag 37.6 Ni Ag φA (L) 3C-2V N-J-3 3D-2V （46） N-J-3-Ni 3C-2V 3D-2V Finish Shell Contact 6.2 Ag Ag 6.2 Ni Ag N-J-3W 3D-2W 5.2 Ag Ag N-J-55U RG-55/U 5.4 Ag Ag N-J-58U RG-58/U 5.4 Ag Ag φA P/N Applicable Cable φA (L) 6.2 Finish Shell Contact 43.5 Ni Au 3.5D-FE (L) N-SJ-3.5DFE NH-3.5D-QEFE/FA 3.5D-QEFE/FA N-J-5 5D-2V 8.6 47.0 Ag Ag N-J-5-Ni 5D-2V 8.6 47.0 Ni Ag N-J-5W 5D-2W 9.2 47.6 Ag Ag N-J-5W-NiCAu 5D-2W 9.2 47.6 Ni Au N-J-5U RG-5/U 9.1 47.0 Ag Ag 5D-FB 8.1 47.0 Ni Ag 8.6 43.5 Ni Au 8.6 43.5 Ni Au 11.2 47.0 Ag Ag 11.2 47.0 Ni Ag N-J-5DFB-1 N-SJ-5DSFA N-SJ-5DEFAE N-J-8U P/N φA φB N-J-8U-Ni 5D-SFA(PE) 5D-FAE 5D-EFAE RG-8/U RG-9/U RG-8/U RG-9/U Applicable Cable φA φB (L) Finish Shell Contact 8D-2V 12.6 19.1 41.2 Ag Ag N-J-8-1-Ni 8D-2V 12.6 19.1 41.2 Ni Ag N-J-8DFB-1 8D-FB 11.8 19.0 41.2 Ni Ag 11.2 19.0 40.0 Ag Ag N-J-8-1 (L) 5D-SFA UG-23D/U ● 6 ● RG-8/U RG-9/U N Series Unit : mm ■ Straight Jack φA φB Shell Contact N-SJ-8DSFA 8D-SFA 11.7 19.5 Ni Au N-SJ-8DSFA-D1 8D-SFA 11.7 19.5 Ni Ag 14.2 22.2 Ni Ag 14.2 22.2 Ni Ag φB φA (52.7) N-J-10-Ni φ29 N-J-10DFB-1 P/N φ16.4 Finish Applicable Cable P/N N-SJ-12DSFA 10C-2V 10D-2V 10D-FB Finish Applicable Cable Shell Contact 12D-SFA Ni Au (59.3) Crimp Type Applicable Cable φA (L) N-J-3D2V-CR10 3D-2V 7.1 N-J-5D2V-CR10 5D-2V 9.5 φA P/N (L) ● 7 ● Finish Shell Contact Hand Crimp Tool P/N 34.0 Ni Au CR-H-1102 36.0 Ni Ag CR-H-1130 N Series Unit : mm ■ Panel Jack B 4-φ3.2 P/N C φ17.5 φA 2.0 C （46） N-PJ-3 N-PJ-3-CAu □ 25.4 N-PJ-3-D1 Mounting Hole 4-φ3.2 +0.1 18.24 ± 0.05 -0 φ18.0 +0.1 -0 Applicable Cable 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 3D-2V φA B C 6.2 16.7 6.2 Finish Shell Contact 18.2 Ag Ag 16.7 18.2 Ag Au 6.2 16.7 18.2 Ni Au N-PJ-3D2W 3D-2W 7.2 16.6 18.2 Ag Ag N-PJ-3D2W-Ni 3D-2W 7.2 16.6 18.2 Ni Ag N-PJ-55U RG-55/U 5.4 16.6 18.2 Ag Ag N-PJ-55U-Ni RG-55/U 5.4 16.6 18.2 Ni Ag N-PJ-58U RG-58/U 5.4 16.6 18.2 Ag Ag N-PJ-58U-Ni RG-58/U 5.4 16.6 18.2 Ni Ag N-PJ-142B/U RG-142B/U 5.4 16.6 18.2 Ag Ag 18.24 ± 0.05 ● 8 ● N Series Unit : mm ■ Panel Jack C 4-φ3.2 Applicable φA φB Cable P/N D φA φB 2.0 5C-2V N-PJ-5 8.6 17.5 16.7 18.2 47 Ni Ag Z 9.2 17.5 16.6 18.2 47 Ag Ag Z RG-5/U 9.2 17.5 16.6 18.2 47 Ag Ag Z 47 Ag Ag Z Ni Ag W N-PJ-5W 5D-2W RG-8/U RG-9/U N-PJ-8DFB Mounting Hole W 8D-FB 11.8 19.0 16.6 18.2 41.2 4-φ3.2 +0.1 18.24 ± 0.05 -0 18.2 ± 0.05 +0.1 11.2 17.5 16.6 18.2 Mounting Hole Z +0.1 4-φ3.2 -0 φ19.5 -0 Shell Z 5D-2V N-PJ-8U φ18.0 +0.1 -0 18.2 ± 0.05 18.24 ± 0.05 4-φ3.2 Applicable Cable φ22.2 P/N 10C-2V N-PJ-10 16.6 10D-2V 23.0 □ 30.0 Mounting Hole +0.1 4-φ3.5 -0 23.0 ± 0.05 2.0 (53.0) MountContact ing Hole Finish Ag 5C-2W N-PJ-5U (L) Ag N-PJ-5-Ni □ 25.4 D 8.6 17.5 16.7 18.2 47 5D-2V D (L) C +0.1 φ16.0 -0 23.0 ± 0.05 ※ Rear Mounting 9 ● ● Finish Shell Contact Ag Ag N Series Unit : mm ■ Panel Jack Crimp Type φ3.5 4-φ3.2 φ6 18.2 P/N N-PJ-0.8DV-CR 2 24 Applicable Cable 0.8D-2V 0.8D-QEV Finish Shell Contact Hand Crimp Tool P/N Note Ni Au CR-H-13510 MoistureProof Type 18.2 (34) □ 25 4-φ3.6 18.2 φ14 P/N 2 21 Finish Applicable Cable Shell Contact Hand Crimp Tool P/N N-PJ-1.5DW-CR1 1.5D-QEW Ni Au CR-H-1156 N-PJ-1.5DHQS-CR1 1.5D-H-Q ・ SUPER Ni Au CR-H-1156 18.2 4 (35.5) □ 25.4 18.2 φ6.25 φ12 φ15.8 4-φ3.2 2 18.5 Shell Contact Hand Crimp Tool P/N N-PJ-2.5DW-CR2 2.5D-2W Ni Au CR-H-1157 P/N Applicable Cable Shell Contact Hand Crimp Tool P/N N-PJ-5DSFA-CR1 5D-SFA Ni Au CR-H-16768 □ 25.4 18.2 φ9.5 φ16 2 8.3 (39) Applicable Cable 18.2 10 (28.5) 4-φ3.2 12 Finish 18.2 □ 25.4 4-φ3.2 18.2 P/N φ7 φ12 Applicable Cable N-PJ-2.5DV-CR 2.5D-QEV 2 28 (42) 6 Finish Shell Contact Hand Crimp Tool P/N Note Ni Au CR-H-1102 MoistureProof Type Contact Hand Crimp Tool P/N Note 18.2 □ 25 4-φ3.2 P/N 18.2 φ5.5 18.7 Finish P/N Applicable Cable N-PJ-1.5DW-CR 1.5D-QEW 28.6 (36.6) 18.2 □ 25 ● 10 ● Finish Shell Ni Au Moisture-Proof Type CR-H-1142 with flange and O ring N Series Unit : mm ■ Panel Jack Solder Type 4-φ4 φA 18.2 P/N Applicable φA Cable B L Finish Shell Contact N-PJ-FCCAV1-SO-2 FCCAVG1 12 24.6 38.6 Ni Au N-PJ-FCCAV4-SO 10 25.6 38.6 Ni Au FCCAVG4 Note MoistureProof Type with flange and O ring 3 18.2 □ 25 B (L) 4-Ｍ3 × 0.5 13.3 3 25.2 (41.5) 21.2 φ9 φ15.8 P/N N-PJ-FCCAEPO-SO 21.2 □ 30 ● 11 ● Finish Applicable Cable Shell Contact FCCAEBPO-4.6 Ni Ag Note with flange and O ring N Series Unit : mm ■ Receptacle 4-A 18.2 φ14.6 P/N 2 18.2 □ 25.4 18.8 L Contact A Mounting Hole 29 Ag Ag 3.2 P N-R-Ni 29 Ni Ag 3.2 P N-R-NiCAu 29 Ni Au 3.2 P N-R-M3 29 Ag Ag 3.2 O UG-58A/U 28 Ag Ag M3 × 0.5 P Mounting Hole P +0.1 18.2 ± 0.05 18.2 ± 0.05 4-φ3.2 -0 4-M3 × 0.5 +0.1 Shell N-R Mounting Hole O φ15.0 -0 Finish L +0.1 φ15.0 -0 18.2 ± 0.05 18.2 ± 0.05 φ1.27 12.7 P/N N-SR-8 Finish Shell Contact Ni Au Note with flange and O ring 2 8 18.6 28.6 12.7 □ 17.5 4-φ3 P/N 21.2 2 N-SR-9 3 26.5 38.5 Finish Shell Contact Ni Au 21.2 □ 30 4-φ3.2 P/N 18.2 φ4 4-φ3 2 28.7 44 N-SR-10 18.2 □ 25.4 12 ● ● Finish Shell Contact Ni Ag Note Moisture-Proof Type with flange and O ring N Series Unit : mm ■ Receptacle φ12 4-φ3.1 φ1.5 φ4 12.7 P/N 18.8 23.6 2 3 5 N-SR-13 Finish Shell Contact Ni Au 12.7 □ 17.5 φ1.27 φ4.03 4-φ3 2 18.7 17.8 12.7 P/N 7 Finish Contact N-SR-20 Ni Au with flange and O ring N-SR-20-D1 Ag Ag with flange and O ring 12.7 □ 17.5 43.5 4-φ3.2 P/N φ3 φ9.7 N-SR-21 18.2 16.5 3 7 Note Shell Finish Shell Contact Ni Ag 18.2 8 □ 25.4 34.5 4-φ3 φ1.27 φ4 2 32 12.7 P/N 6.8 12.7 8.8 □ 17.5 N-SR-23 Finish Shell Contact Ni Au 40.8 4-φ3 2 18.6 12.7 φ4.03 φ1.27 P/N N-SR-28 12.7 □ 17.5 24.7 ● 13 ● Finish Shell Contact Ni Ag Note with flange and O ring N Series Unit : mm ■ Bulkhead Receptacle φ20 φ3.05 P/N Contact Ag Ag N-RB2 2 18.4 19.0 28.7 φ4 P/N φ20 Finish Shell Finish Shell Contact Ni Ag N-RB3 2 18.4 13.5 28.7 19 ■ Plug Receptacle 4-φ3.2 18.2 φ14.7 P/N 2 25 Finish Shell Contact N-PR Ag Ag N-PR-Ni-1 Ni Ag 18.2 □ 25.4 36 ■ Cap 14.5 φ19.3 P/N （57） Finish N-C Ag N-C-Ni-1 Ni 7 3. φ φ23.3 P/N 11.1 N-C-D1 21 ● 14 ● Finish Ni