CABLE EQUALISERS Long runs of cable often require equalisation for loss in signal amplitude with frequency. This range of cable equalisers is designed to correct this loss to within 0.1 dB when using the length of cable specified. The module will produce a total insertion loss of 3 dB (when linked to the cable) so that standard video amplitude may be used to boost signal. It is in a diecast metal box with BNC connectors or it can be supplied as a 20 pin DIL package. Other cables can be equalised, please discuss your requirements. Order Code FE213 1 FE214 2 FE215 2 FE216 2 FE217 2 FE218 2 FE219 2 FE220 2 Cable 1,0 / 6,6 200 m 100 m 80 m 60 m 50 m 40 m 30 m 20 m 0,6 / 3,7 134 m 67 m 56.6 m 40.2 m 33.5 m 26.8 m 20.1 m 13.4 m 0,6 / 2,8 120 m 60 m 48 m 36 m 30 m 24 m 18 m 12 m Typical performance of cable plus equaliser: 6.0 dB + 0.1 dB 1 Insertion Loss at 100 kHz 3.0 dB + 0.1 dB 2 Amplitude Ripple to 5.5 MHz + 0.1 dB Impedance 75 ohms Metal box with BNC connectors 2 x 1.5 x 1.25 inches Package © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara260d.doc Page 1 of 2 Jan-01(A) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara260d.doc Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Jan-01(A)