4 SWITCH CABLE CLONE SIMULATES THE EFFECT OF COAXIAL CABLE IN SERIAL DIGITAL SYSTEMS • • • • • • • Emulates cable up to 360 MHz Simulates more than 300 metres Fixed and Switched Programmable Known accurate loss for repeatable performance Order Code Cable Type Quick and easy to use No power needed Pocket size Simulated Lengths SC75A37B Cable Type Switch 2 Switch 5 Switch 10 Switch 20 SC75A045B-A BELDEN 8281 5m + 10m + 10m + 20m SC75A375B-A BELDEN 8281 25m + 50m + 100m + 200m BBC PSF 1/2M 25 50 100 200 SC75A045B-B BBC PSF 1/2M 5m + 10m + 10m + 20m BELDEN 8281 25 50 100 200 SC75A375B-B BBC PCF 1/2M 25m + 50m + 100m + 200m BBC PSF 1/3M 19 39 78 156 SC75A37B see table opposite RG59 18 36 72 144 In serial digital applications it is known that a signal adhering to the amplitude specification of 800mV + 10% will maintain its integrity if the attenuation at the Nyquist frequency is 30dB or less. It may then be reconstituted correctly by, say, the Sony deserialiser. The CABLE CLONE has similar attenuation vs frequency characteristics to coax cable over the wide frequency spectrum of the serial digital signal. When installing or testing serial digital equipment it is often necessary to establish the maximum length of cable over which the signal will remain useable, or to ensure there is sufficient margin (headroom) if a certain length of cable is required. Most adaptive equalisers, in deserialisers for example, rely on the attenuation characteristics of the cable to operate correctly. At present the only way to do this is to insert the actual length of cable into the path. This is time consuming, inconvenient and costly. The Faraday CABLE CLONE is the solution to the problem. The CABLE CLONE emulates the loss and group delay frequency characteristics of a cable to approximately 360 MHz. It is supplied in a small metal box fitted with BNC connectors which needs no power supply. It my be carried in the pocket and is always ready for immediate use. By using the table on the reverse of the SC75A37B box the user can relate the loss to lengths of various types of cable. Fixed CABLE CLONES of 1dB to 20dB and a Four Switched Programmable version containing 2:5:10 and 20dB are available for all the various systems with 75Ω for video and 50Ω for Ethernet. An Eight Switched Programmable version simulating 5:10:10:20:50:100:100 and 200 metres of Belden cable is also available. Apart from the smaller space requirements of the cable clone (vs cable) it offers the advantage that comparable measurements become possible since the influence of manufacturing tolerances, customary in the case of coaxial cables, is abolished. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara234d.doc Page 1 of 2 May-02(C) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara234d.doc Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk May-02(C)