SERIAL DIGITAL VIDEO PASSIVE SIGNAL SPLITTER VS400M The VS400M Serial Digital Video Passive Signal Splitter answers a demand from systems engineers for an economical way of dividing a single serial digital video signal between two destinations. The modules are designed for in line use and, having no powered components, are as simple to use as a T-piece. A modest signal loss is incurred from the use of these modules, but they can be used freely on all medium and short cable runs. FEATURES: 1 x 2 Digital Signal Splitter Passive device – requires no power ADVANTAGES: Easy to use: 2 Serial Outputs: Passive circuitry: Just plug in line Can also be used as a distribution amplifier No power supplies or other units SPECIFICATION: Serial Input: Format: Connector: Return Loss: Data Rate: Standard: SDI (ITU-R BT.601) EBU Tech 3267-E and SMPTE 259M-C BNC 10 dB, 5-270 MHz both outputs terminated 5-360 Mb/s Serial Outputs: Format: Connector: Return Loss: Cable drive capability: Two As Input BNC >16 dB, 5-270 MHz Up to 40 Metres (Belden 8281) Package: 1U rack available. DR00221B Drawing DR00223A available on request © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara104d Page 1 of 2 Sep-05(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara104d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Sep-05(B)