LM3480 www.ti.com SNVS011E – JUNE 1999 – REVISED MARCH 2013 LM3480 100 mA, SOT-23, Quasi Low-Dropout Linear Voltage Regulator Check for Samples: LM3480 FEATURES DESCRIPTION • • The LM3480 is an integrated linear voltage regulator. It features operation from an input as high as 30V and a ensured maximum dropout of 1.2V at the full 100 mA load. Standard packaging for the LM3480 is the 3-lead SOT-23 package. 1 2 3.3, 5, 12, and 15V Versions Available Packaged in the Tiny 3-Lead SOT-23 Package APPLICATIONS • • • • Tiny Alternative to LM78LXX Series and Similar Devices Tiny 5V±5% to 3.3V, 100 mA Converter Post Regulator for Switching DC/DC Converter Bias Supply for Analog Circuits KEY SPECIFICATIONS • • • • • 30V Maximum Input for Operation 1.2V Ensured Maximum Dropout Over Full Load and Temperature Ranges 100 mA Ensured Minimum Load Current ±5% Ensured Output Voltage Tolerance Over Full Load and Temperature Ranges −40 to +125°C Junction Temperature Range for Operation The 5, 12, and 15V members of the LM3480 series are intended as tiny alternatives to industry standard LM78LXX series and similar devices. The 1.2V quasi low dropout of LM3480 series devices makes them a nice fit in many applications where the 2 to 2.5V dropout of LM78LXX series devices precludes their (LM78LXX series devices) use. The LM3480 series features a 3.3V member. The SOT-23 packaging and quasi low dropout features of the LM3480 series converge in this device to provide a very nice, very tiny 3.3V, 100 mA bias supply that regulates directly off the system 5V±5% power supply. Typical Application Circuit Connection Diagram Figure 1. Top View SOT-23 Package Package Number DBZ0003A 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1999–2013, Texas Instruments Incorporated LM3480 SNVS011E – JUNE 1999 – REVISED MARCH 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Input Voltage (IN to GND) Power Dissipation Junction Temp. 35V (3) 333mW (3) +150°C −65 to +150°C Ambient Storage Temp. Soldering Time, Temp. Wave Infrared Vapor Phase ESD (1) (2) (3) (4) (5) (4) 4 sec., 260°C 10 sec., 240°C 75 sec., 219°C (5) 2kV Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which operation of the device is ensured. Operating Ratings do not imply ensured performance limits. For ensured performance limits and associated test conditions, see the Electrical Characteristics. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. The Absolute Maximum power dissipation depends on the ambient temperature and can be calculated using P = (TJ - TA)/θJA where TJ is the junction temperature, TA is the ambient temperature, and θJA is the junction-to-ambient thermal resistance. The 333 mW rating results from substituting the Absolute Maximum junction temperature, 150°C, for TJ , 50°C for TA, and 300°C/W for θJA. More power can be safely dissipated at lower ambient temperatures. Less power can be safely dissipated at higher ambient temperatures. The Absolute Maximum power dissipation can be increased by 3.33 mW for each °C below 50°C ambient. It must be derated by 3.33 mW for each °C above 50°C ambient. A θJA of 300°C/W represents the worst-case condition of no heat sinking of the 3-lead plastic SOT-23 package. Heat sinking enables the safe dissipation of more power. The LM3480 actively limits its junction temperature to about 150°C. Times shown are dwell times. Temperatures shown are dwell temperatures. For detailed information on soldering plastic small-outline packages, refer to the Packaging Databook . For testing purposes, ESD was applied using the human-body model, a 100 pF capacitor discharged through a 1.5 kΩ resistor. Operating Ratings (1) Max. Input Voltage (IN to GND) 30V −40 to +125°C Junction Temp. (TJ) Max. Power Dissipation (1) (2) (2) 250mW Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions under which operation of the device is ensured. Operating Ratings do not imply ensured performance limits. For ensured performance limits and associated test conditions, see the Electrical Characteristics. As with the Absolute Maximum power dissipation, the maximum power dissipation for operation depends on the ambient temperature. The 250 mW rating appearing under Operating Ratings results from substituting the maximum junction temperature for operation, 125°C, for TJ, 50°C for TA, and 300°C/W for θJA in P = (TJ - TA)/θJA. More power can be dissipated at lower ambient temperatures. Less power can be dissipated at higher ambient temperatures. The maximum power dissipation for operation appearing under Operating Ratings can be increased by 3.33 mW for each °C below 50°C ambient. It must be derated by 3.33 mW for each °C above 50°C ambient. A θJA of 300°C/W represents the worst-case condition of no heat sinking of the 3-lead plastic SOT-23 package. Heat sinking enables the dissipation of more power during operation. Electrical Characteristics LM3480-3.3, LM3480-5.0 Typicals and limits appearing in normal type apply for TA = TJ = 25°C. Limits appearing in boldface type apply over the entire junction temperature range for operation, −40 to +125°C. (1) (2) (3) Nominal Output Voltage (VNOM) Symbol VOUT ΔVOUT (1) (2) (3) 2 Parameter Output Voltage Line Regulation 3.3V Conditions VIN = VNOM + 1.5V, 1 mA ≤ IOUT ≤ 100 mA VNOM + 1.5V ≤ VIN ≤ 30V, IOUT = 1 mA Typical 5.0V Limit 3.30 Typical Limit 5.00 3.17 3.14 3.43 3.46 10 4.80 4.75 5.20 5.25 V V(min) V(min) V(max) V(max) 25 mV mV(max) 12 25 Units A typical is the center of characterization data taken with TA = TJ = 25°C. Typicals are not ensured. All limits are ensured. All electrical characteristics having room-temperature limits are tested during production with TA = TJ = 25°C. All hot and cold limits are ensured by correlating the electrical characteristics to process and temperature variations and applying statistical process control. All voltages except dropout are with respect to the voltage at the GND pin. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 LM3480 www.ti.com SNVS011E – JUNE 1999 – REVISED MARCH 2013 Electrical Characteristics LM3480-3.3, LM3480-5.0 (continued) Typicals and limits appearing in normal type apply for TA = TJ = 25°C. Limits appearing in boldface type apply over the entire junction temperature range for operation, −40 to +125°C. (1) (2) (3) Nominal Output Voltage (VNOM) Symbol ΔVOUT IGND VIN VOUT 3.3V Parameter Conditions Load Regulation VIN = VNOM + 1.5V, 10 mA ≤ IOUT ≤ 100 mA 20 VNOM + 1.5V ≤ VIN ≤ 30V, No Load 2 Ground Pin Current Dropout Voltage IOUT = 10 mA Typical 5.0V Limit Typical 20 40 0.9 Output Noise Voltage VIN = 10V, Bandwidth: 10 Hz to 100 kHz 4 mA mA(max) 0.9 1.0 V V(max) V(max) 1.1 1.2 V V(max) V(max) 0.9 1.1 1.2 en mV mV(max) 0.7 0.9 1.0 100 Units 40 2 4 0.7 IOUT = 100 mA Limit 150 µVrms LM3480-12, LM3480-15 Typicals and limits appearing in normal type apply for TA = TJ = 25°C. Limits appearing in boldface type apply over the entire junction temperature range for operation, −40 to +125°C. (1) (2) (3) Nominal Output Voltage (VNOM) Symbol VOUT ΔVOUT ΔVOUT IGND VIN VOUT Parameter Output Voltage Line Regulation Load Regulation Ground Pin Current Dropout Voltage 12V Conditions VIN = VNOM + 1.5V, 1 mA ≤ IOUT ≤ 100 mA Typical 12.00 Typical 14 VIN = VNOM + 1.5V, 10 mA ≤ IOUT ≤ 100 mA 36 VNOM + 1.5V ≤ VIN ≤ 30V, No Load 2 0.9 (1) (2) (3) VIN = 10V, Bandwidth: 10 Hz to 100 kHz 360 mV mV(max) 75 mV mV(max) 4 mA mA(max) 0.9 1.0 V V(max) V(max) 1.1 1.2 V V(max) V(max) 0.7 0.9 1.0 Output Noise Voltage 40 2 4 0.9 1.1 1.2 en V V(min) V(min) V(max) V(max) 45 60 450 Units 14.40 14.25 15.60 15.75 16 40 0.7 IOUT = 100 mA Limit 15.00 11.52 11.40 12.48 12.60 VNOM + 1.5V ≤ VIN ≤ 30V, IOUT = 1 mA IOUT = 10 mA 15V Limit µVrms A typical is the center of characterization data taken with TA = TJ = 25°C. Typicals are not ensured. All limits are ensured. All electrical characteristics having room-temperature limits are tested during production with TA = TJ = 25°C. All hot and cold limits are ensured by correlating the electrical characteristics to process and temperature variations and applying statistical process control. All voltages except dropout are with respect to the voltage at the GND pin. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 3 LM3480 SNVS011E – JUNE 1999 – REVISED MARCH 2013 www.ti.com Typical Performance Characteristics Unless indicated otherwise, VIN = VNOM + 1.5V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .=25°C. 4 Dropout Voltage vs Load Current Dropout Voltage vs Junction Temperature Figure 2. Figure 3. Ground Pin Current vs Input Voltage Ground Pin Current vs Input Voltage Figure 4. Figure 5. Ground Pin Current vs Load Current Ground Pin Current vs Junction Temperature Figure 6. Figure 7. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 LM3480 www.ti.com SNVS011E – JUNE 1999 – REVISED MARCH 2013 Typical Performance Characteristics (continued) Unless indicated otherwise, VIN = VNOM + 1.5V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .=25°C. Input Current vs Input Voltage Input Current vs Input Voltage Figure 8. Figure 9. Line Transient Response Line Transient Response Figure 10. Figure 11. Load Transient Response Load Transient Response Figure 12. Figure 13. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 5 LM3480 SNVS011E – JUNE 1999 – REVISED MARCH 2013 www.ti.com Typical Performance Characteristics (continued) Unless indicated otherwise, VIN = VNOM + 1.5V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .=25°C. 6 Load Transient Response Load Transient Response Figure 14. Figure 15. Output Voltage vs Input Voltage Output Voltage vs Input Voltage Figure 16. Figure 17. Output Voltage vs Input Voltage Output Voltage vs Input Voltage Figure 18. Figure 19. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 LM3480 www.ti.com SNVS011E – JUNE 1999 – REVISED MARCH 2013 Typical Performance Characteristics (continued) Unless indicated otherwise, VIN = VNOM + 1.5V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .=25°C. Output Short- Circuit Current Output Short- Circuit Current Figure 20. Figure 21. Power Supply Rejection Ratio Power Supply Rejection Ratio Figure 22. Figure 23. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 7 LM3480 SNVS011E – JUNE 1999 – REVISED MARCH 2013 www.ti.com Typical Performance Characteristics (continued) Unless indicated otherwise, VIN = VNOM + 1.5V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .=25°C. DC Load Regulation Figure 24. 8 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 LM3480 www.ti.com SNVS011E – JUNE 1999 – REVISED MARCH 2013 REVISION HISTORY Changes from Revision D (March 2013) to Revision E • Page Changed layout of National Data Sheet to TI format ............................................................................................................ 7 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM3480 9 PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM3480IM3-12 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 L0C LM3480IM3-12/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0C LM3480IM3-15/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0D LM3480IM3-3.3 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 L0A LM3480IM3-3.3/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0A LM3480IM3-5.0 NRND SOT-23 DBZ 3 1000 TBD Call TI Call TI -40 to 125 L0B LM3480IM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0B LM3480IM3X-12 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 125 L0C LM3480IM3X-12/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0C LM3480IM3X-15/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0D LM3480IM3X-3.3 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 125 L0A LM3480IM3X-3.3/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0A LM3480IM3X-5.0 NRND SOT-23 DBZ 3 3000 TBD Call TI Call TI -40 to 125 L0B LM3480IM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 125 L0B (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) LM3480IM3-12 SOT-23 DBZ 3 1000 178.0 8.4 LM3480IM3-12/NOPB SOT-23 DBZ 3 1000 178.0 LM3480IM3-15/NOPB SOT-23 DBZ 3 1000 178.0 LM3480IM3-3.3 SOT-23 DBZ 3 1000 LM3480IM3-3.3/NOPB SOT-23 DBZ 3 W Pin1 (mm) Quadrant 3.3 2.9 1.22 4.0 8.0 Q3 8.4 3.3 2.9 1.22 4.0 8.0 Q3 8.4 3.3 2.9 1.22 4.0 8.0 Q3 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-12 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-12/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-15/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-3.3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-3.3/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-5.0 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 LM3480IM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM3480IM3-12 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-12/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-15/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-3.3 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-3.3/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0 LM3480IM3X-12 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-12/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-15/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-3.3 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-3.3/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-5.0 SOT-23 DBZ 3 3000 210.0 185.0 35.0 LM3480IM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated