WISDOM FUTURE WIRELESS WORLD 智慧未来 无线世界 TI德州仪器无线链接产品数据手册 CC115L 声明：此手册由信驰达科技进行翻译整理，旨在更方便快捷的为您进行开发和交流提供帮助。译文难免会出现错误及误差，如对此有建议可通过邮件方式 联系我们，非常感谢您的反馈。凡译文手册注明“ ”的作品，均为信驰达（RF-star®）公司合法拥有版权或有权使用的作品，未经本公司授权不得转 载、摘编或利用其它方式用于商业用途。已经本公司授权使用作品的，应在授权范围内使用，并注明 “信驰达科技提供”。违反上述声明者，本公司将拥有 最终解释权。 Shenzhen RF-star Technology Co.,Ltd. TEL: 0755-86329829 FAX:0755-86329413 http://www.szrfstar.com WISDOM FUTURE WIRELESS WORLD 智慧未来 无线世界 信驰达简介 信驰达科技（RF-star）是一家集合方案设计功能和核心器件供应的专业本地电子元器件分销商，专注低功 耗射频 LPRF 和低功耗 MCU 领域，公司成立于 2010年，作为中国区唯一具有美国 TI 公司授予的 LPRF Product Reseller 和 Third Party 双重资质的公司，一直引领着 LPRF 技术在国内的推广和应用，是国内唯一 一家可提供 LPRF 软硬件产品、技术支持、解决方案和核心元器件供应一条龙服务的专业化公司； 公司在美国新泽西州、中国深圳、上海、北京、天津、无锡、长沙、成都、重庆设有研发中心和办事处， 拥有资深的技术研发团队和销售团队以及 SMT 生产工厂。 无线射频器件用于低于1GHz 和2.4GHz 频段、ANT、蓝牙(Bluetooth)、低功耗蓝牙、射频识别（RFID）、 PurePath 无线音频、ZigBee、IEEE802.15.4、Zigbee RF4CE、6LoWPAN、Wi-Fi 的射频集成电路( RF IC ) 和专有协议。 产品市场应用：ZigBee 无线传感网络，各种数据采集及遥测监控 (含数据, 语音,图像等),可应用于安防、 医疗、能源、水力、电力、交通监控、防盗，无线自动抄表；仪器仪表远程数据遥测、工业无线遥控；消防安 全自动报警、煤矿安全监控及人员定位；汽车防盗、胎压检测，四轮定位；无线键盘、鼠标、打印机、游戏 杆、遥控玩具、机器人等广泛的领域。适用于合乎全世界免费频段 315MHz、433 MHz、470MHz、868 MHz、915 MHz、2.4GHz，符合 FCC、CE、SGS、RoHs 认证规范,产品和信誉受到国内外顾客的一致好 评。 RF-star 将一如既往，为客户提供更多、更好的产品，更具优势的技术服务，良好的商务服务，和更完善 的物流服务。RF-star 将跨上一个新的平台，获得更大的发展空间。 RF-star 将继续本着“务实、诚信、学习、 创新”的专业精神，团结一致、奋勇开拓、锐意进取，为成为全球 无线射频技术绝对第一之产品、服务及解决 方案提供者，把科技与客户联系在一起，为供应链注入动力，并提供卓越的投资回报而不懈努力。 如果您在产品开发过程中发现技术难题以及高频困扰，竭诚欢迎来电洽询。我们将为您提供技术支持和解 决方案，让您能更快把产品推向市场。 我们深信射频技术将会得到迅速的发展与普及，我们愿意分享多年来在射频行业积累的经验与教训，为无 线的明天做出贡献。专业源于专注，科技铸就未来。 Shenzhen RF-star Technology Co.,Ltd. TEL: 0755-86329829 FAX:0755-86329413 http://www.szrfstar.com WISDOM FUTURE WIRELESS WORLD 智慧未来 无线世界 CC115L 超值系列 (Value Line) 发送器 特性 1 • • • 主要特性 – 可编程输出功率高达 +12 dBm（对于所有支持 的频率） – 可编程数据速率：范围是 0.6 至 600 kbps – 频段：300 - 348 MHz、387 - 464 MHz 和 779 - 928 MHz – 支持 2-FSK、4-FSK、GFSK、MSK 和 OOK 数字特性 – 可灵活地支持面向分组的系统 – 对同步字插入、灵活和分组长度及自动 CRC 计 算提供了片上支持 低功耗特性 – 200nA 睡眠模式电流消耗 – 快速启动时间 ：240 μs（从睡眠模式到发送 [TX] 模式） – 64 字节 TX FIFO 应用 • • • • • • • 工作于 315 / 433 / 868 / 915 MHz ISM / SRD 频段 的超低功耗无线应用 无线报警和安全系统 工业监测和控制 遥控 玩具 家庭和楼宇自动化 有源 RFID 常规 • 极少的外部组件；全集成化频率合成器 • 绿色环保型封装：符合 RoHS 标准，并且不含锑或 溴 • 小尺寸（采用 QLP 4x4 mm 封装，20 引脚） • 适合那些旨在符合 EN 300 220（欧洲）和 FCC CFR Part 15（美国）标准的系统 • 支持异步及同步串行发送模式，以返回兼容现有的 射频通信协议 说明 CC115L 是一款成本优化的 sub-1 GHz RF 发送器。 该电路基于受欢迎的 CC1101 RF 收发器，而且 RF 性能特征 相同。 CC115L 超值系列发送器与 CC113L 超值系列接收器一起实现了低成本的 RF 链路。 RF 发送器与一个可配置的基带调制器实现了集成。 该调制解调器支持各种调制格式，并且具有 0.6 至 600kbps 的 可配置数据速率。 CC115L 提供了针对分组处理、数据缓冲和突发传输的丰富硬件支持。 CC115L 的主要工作参数及 64 字节发送 FIFO 可通过一个 SPI 接口进行控制。 在一般系统中，CC115L 将与微控 制器和少量的附加无源组件配合使用。 Shenzhen RF-star Technology Co.,Ltd. TEL:0755-86329829 TEL:0755-86329413 Http;//www.szrfstar.com CC115L Abbreviations Abbreviations used in this data sheet are described below. 2-FSK Binary Frequency Shift Keying MCU Microcontroller Unit 4-FSK Quaternary Frequency Shift Keying MSB Most Significant Bit ADC Analog to Digital Converter N/A Not Applicable AMR Automatic Meter Reading NRZ Non Return to Zero (Coding) BOM Bill of Material OOK On-Off Keying BT Bandwidth-Time product PA Power Amplifier CFR Code of Federal Regulations PCB Printed Circuit Board CRC Cyclic Redundancy Check PD Power Down CW Continuous Wave (Unmodulated Carrier) PER Packet Error Rate DC Direct Current PLL Phase Locked Loop ESR Equivalent Series Resistance POR Power-On Reset FCC Federal Communications Commission QLP Quad Leadless Package FIFO First-In-First-Out QPSK Quadrature Phase Shift Keying FS Frequency Synthesizer RC Resistor-Capacitor GFSK Gaussian shaped Frequency Shift Keying RF Radio Frequency IF Intermediate Frequency SPI Serial Peripheral Interface I/Q In-Phase/Quadrature SRD Short Range Devices ISM Industrial, Scientific, Medical TX Transmit, Transmit Mode LC Inductor-Capacitor VCO Voltage Controlled Oscillator LO Local Oscillator XOSC Crystal Oscillator LSB Least Significant Bit XTAL Crystal SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Table Of Contents APPLICATIONS .................................................................................................................................................. 1 KEY FEATURES ................................................................................................................................................. 1 RF PERFORMANCE .......................................................................................................................................... 1 DIGITAL FEATURES......................................................................................................................................... 1 LOW-POWER FEATURES ................................................................................................................................ 1 GENERAL ............................................................................................................................................................ 1 PRODUCT DESCRIPTION ................................................................................................................................ 1 ABBREVIATIONS ............................................................................................................................................... 2 TABLE OF CONTENTS ..................................................................................................................................... 3 1 ABSOLUTE MAXIMUM RATINGS ..................................................................................................... 5 2 OPERATING CONDITIONS ................................................................................................................. 5 3 GENERAL CHARACTERISTICS ......................................................................................................... 5 4 ELECTRICAL SPECIFICATIONS ....................................................................................................... 6 4.1 CURRENT CONSUMPTION ............................................................................................................................ 6 4.2 RF TRANSMIT SECTION ............................................................................................................................... 7 4.3 CRYSTAL OSCILLATOR ................................................................................................................................ 9 4.4 FREQUENCY SYNTHESIZER CHARACTERISTICS ............................................................................................ 9 4.5 DC CHARACTERISTICS .............................................................................................................................. 10 4.6 POWER-ON RESET ..................................................................................................................................... 10 5 PIN CONFIGURATION ........................................................................................................................ 10 6 CIRCUIT DESCRIPTION .................................................................................................................... 12 7 APPLICATION CIRCUIT .................................................................................................................... 12 7.1 BIAS RESISTOR .......................................................................................................................................... 12 7.2 BALUN AND RF MATCHING ....................................................................................................................... 13 7.3 CRYSTAL ................................................................................................................................................... 14 7.4 REFERENCE SIGNAL .................................................................................................................................. 15 7.5 ADDITIONAL FILTERING ............................................................................................................................ 15 7.6 POWER SUPPLY DECOUPLING .................................................................................................................... 15 7.7 PCB LAYOUT RECOMMENDATIONS ........................................................................................................... 15 8 CONFIGURATION OVERVIEW ........................................................................................................ 17 9 CONFIGURATION SOFTWARE ........................................................................................................ 18 10 4-WIRE SERIAL CONFIGURATION AND DATA INTERFACE .................................................. 18 10.1 CHIP STATUS BYTE ................................................................................................................................... 19 10.2 REGISTER ACCESS ..................................................................................................................................... 20 10.3 SPI READ .................................................................................................................................................. 20 10.4 COMMAND STROBES ................................................................................................................................. 21 10.5 TX FIFO ACCESS ...................................................................................................................................... 21 10.6 PATABLE ACCESS ................................................................................................................................... 21 11 MICROCONTROLLER INTERFACE AND PIN CONFIGURATION .......................................... 22 11.1 CONFIGURATION INTERFACE ..................................................................................................................... 22 11.2 GENERAL CONTROL AND STATUS PINS ..................................................................................................... 22 12 DATA RATE PROGRAMMING.......................................................................................................... 23 13 PACKET HANDLING HARDWARE SUPPORT .............................................................................. 24 13.1 PACKET FORMAT ....................................................................................................................................... 24 13.2 PACKET HANDLING ................................................................................................................................... 25 13.3 PACKET HANDLING IN FIRMWARE ............................................................................................................. 26 14 MODULATION FORMATS ................................................................................................................. 26 14.1 FREQUENCY SHIFT KEYING ....................................................................................................................... 26 14.2 AMPLITUDE MODULATION ........................................................................................................................ 27 15 RADIO CONTROL ................................................................................................................................ 27 15.1 POWER-ON START-UP SEQUENCE ............................................................................................................. 28 15.2 CRYSTAL CONTROL ................................................................................................................................... 29 Shenzhen RF-star Technology Co.,Ltd. TEL:0755-86329829 TEL:0755-86329413 Http;//www.szrfstar.com CC115L 15.3 15.4 15.5 16 17 18 18.1 19 20 21 22 22.1 22.2 23 23.1 23.2 23.3 23.4 23.5 23.6 24 24.1 24.2 24.3 25 26 27 27.1 VOLTAGE REGULATOR CONTROL.............................................................................................................. 29 TRANSMIT MODE (TX) .............................................................................................................................. 29 TIMING ...................................................................................................................................................... 30 TX FIFO .................................................................................................................................................. 31 FREQUENCY PROGRAMMING ........................................................................................................ 31 VCO ......................................................................................................................................................... 32 VCO AND PLL SELF-CALIBRATION .......................................................................................................... 32 VOLTAGE REGULATORS ................................................................................................................. 32 OUTPUT POWER PROGRAMMING ................................................................................................ 33 GENERAL PURPOSE / TEST OUTPUT CONTROL PINS ............................................................. 34 ASYNCHRONOUS AND SYNCHRONOUS SERIAL OPERATION .............................................. 36 ASYNCHRONOUS SERIAL OPERATION ........................................................................................................ 36 SYNCHRONOUS SERIAL OPERATION .......................................................................................................... 36 SYSTEM CONSIDERATIONS AND GUIDELINES ......................................................................... 36 SRD REGULATIONS ................................................................................................................................... 36 CALIBRATION IN MULTI-CHANNEL SYSTEMS ............................................................................................ 37 WIDEBAND MODULATION WHEN NOT USING SPREAD SPECTRUM ............................................................. 37 DATA BURST TRANSMISSIONS................................................................................................................... 37 CONTINUOUS TRANSMISSIONS .................................................................................................................. 38 INCREASING OUTPUT POWER .................................................................................................................... 38 CONFIGURATION REGISTERS ........................................................................................................ 38 CONFIGURATION REGISTER DETAILS - REGISTERS WITH PRESERVED VALUES IN SLEEP STATE ............... 42 CONFIGURATION REGISTER DETAILS - REGISTERS THAT LOOSE PROGRAMMING IN SLEEP STATE .......... 50 STATUS REGISTER DETAILS....................................................................................................................... 50 DEVELOPMENT KIT ORDERING INFORMATION ..................................................................... 52 REFERENCES ....................................................................................................................................... 53 GENERAL INFORMATION ................................................................................................................ 54 DOCUMENT HISTORY ................................................................................................................................ 54 Shenzhen RF-star Technology Co.,Ltd. TEL:0755-86329829 TEL:0755-86329413 Http;//www.szrfstar.com CC115L 1 Absolute Maximum Ratings Under no circumstances must the absolute maximum ratings given in Table 1 be violated. Stress exceeding one or more of the limiting values may cause permanent damage to the device. Parameter Min Max Supply voltage –0.3 3.9 V Voltage on any digital pin –0.3 VDD + 0.3, max 3.9 V Voltage on the pins RF_P, RF_N, DCOUPL, RBIAS –0.3 2.0 V Voltage ramp-up rate 120 kV/µs Input RF level +10 dBm 150 C Solder reflow temperature 260 C According to IPC/JEDEC J-STD-020 ESD 750 V According to JEDEC STD 22, method A114, Human Body Model (HBM) ESD 400 V According to JEDEC STD 22, C101C, Charged Device Model (CDM) –50 Storage temperature range Units Condition All supply pins must have the same voltage Table 1: Absolute Maximum Ratings Caution! ESD sensitive device. Precaution should be used when handling the device in order to prevent permanent damage. 2 Operating Conditions The operating conditions for CC115L are listed Table 2 in below. Parameter Min Max Unit Operating temperature −40 85 C Operating supply voltage 1.8 3.6 V Condition All supply pins must have the same voltage Table 2: Operating Conditions 3 General Characteristics Parameter Min Max Unit Frequency range 300 348 MHz 387 464 MHz 779 928 MHz 0.6 500 kBaud 2-FSK 0.6 250 kBaud GFSK and OOK 0.6 300 kBaud 4-FSK (the data rate in kbps will be twice the baud rate) Data rate Condition/Note If using a 27 MHz crystal, the lower frequency limit for this band is 392 MHz Optional Manchester encoding (the data rate in kbps will be half the baud rate) Table 3: General Characteristics SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 4 Electrical Specifications 4.1 Current Consumption TA = 25 C, VDD = 3.0 V if nothing else stated. All measurement results are obtained using [1] and [2]. Parameter Current consumption in power down modes Current consumption Current consumption, 315 MHz Current consumption, 433 MHz Current consumption, 868/915 MHz Min Typ Max Unit Condition 0.2 1 A Voltage regulator to digital part off, register values retained (SLEEP state). All GDO pins programmed to 0x2F (HW to 0) 100 A Voltage regulator to digital part off, register values retained, XOSC running (SLEEP state with MCSM0.OSC_FORCE_ON set) 165 A Voltage regulator to digital part on, all other modules in power down (XOFF state) 1.7 mA Only voltage regulator to digital part and crystal oscillator running (IDLE state) 8.4 mA Only the frequency synthesizer is running (FSTXON state). This current consumption is also representative for the other intermediate states when going from IDLE to TX, including the calibration state 27.4 mA Transmit mode, +10 dBm output power 15.0 mA Transmit mode, 0 dBm output power 12.3 mA Transmit mode, –6 dBm output power 29.2 mA Transmit mode, +10 dBm output power 16.0 mA Transmit mode, 0 dBm output power 13.1 mA Transmit mode, –6 dBm output power 34.2 mA Transmit mode, +12 dBm output power, 868 MHz 30.0 mA Transmit mode, +10 dBm output power, 868 MHz 16.8 mA Transmit mode, 0 dBm output power, 868 MHz 16.4 mA Transmit mode, –6 dBm output power, 868 MHz. 33.4 mA Transmit mode, +11 dBm output power, 915 MHz 30.7 mA Transmit mode, +10 dBm output power, 915 MHz 17.2 mA Transmit mode, 0 dBm output power, 915 MHz 17.0 mA Transmit mode, –6 dBm output power, 915 MHz Table 4: Current Consumption Supply Voltage VDD = 1.8 V Supply Voltage VDD = 3.0 V Supply Voltage VDD = 3.6 V Temperature [°C] −40 25 85 −40 25 85 −40 25 85 Current [mA], PATABLE=0xC0, +12 dBm 32.7 31.5 30.5 35.3 34.2 33.3 35.5 34.4 33.5 Current [mA], PATABLE=0xC5, +10 dBm 30.1 29.2 28.3 30.9 30.0 29.4 31.1 30.3 29.6 Current [mA], PATABLE=0x50, 0 dBm 16.4 16.0 15.6 17.3 16.8 16.4 17.6 17.1 16.7 Table 5: Typical TX Current Consumption over Temperature and Supply Voltage, 868 MHz SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Supply Voltage VDD = 1.8 V Supply Voltage VDD = 3.0 V Supply Voltage VDD = 3.6 V Temperature [°C] −40 25 85 −40 25 85 −40 25 85 Current [mA], PATABLE=0xC0, +11 dBm 31.9 30.7 29.8 34.6 33.4 32.5 34.8 33.6 32.7 Current [mA], PATABLE=0xC3, +10 dBm 30.9 29.8 28.9 31.7 30.7 30.0 31.9 31.0 30.2 Current [mA], PATABLE=0x8E, 0 dBm 17.2 16.8 16.4 17.6 17.2 16.9 17.8 17.4 17.1 Table 6: Typical TX Current Consumption over Temperature and Supply Voltage, 915 MHz 4.2 RF Transmit Section TA = 25 C, VDD = 3.0 V, +10 dBm if nothing else stated. All measurement results are obtained using [1] and [2]. Parameter Min Typ Max Unit Differential load impedance Condition/Note Differential impedance as seen from the RF-port (RF_P and RF_N) towards the antenna. 315 MHz 122 + j31 433 MHz 116 + j41 868/915 MHz 86.5 + j43 Output power, highest setting 315 MHz +10 dBm 433 MHz +10 dBm 868 MHz +12 dBm 915 MHz +11 dBm Output power, lowest setting −30 dBm Output power is programmable, and full range is available in all frequency bands. Output power may be restricted by regulatory limits. See also Design Note DN013 [7], which gives the output power and harmonics when using multi-layer inductors. The output power is then typically +10 dBm when operating at 868/915 MHz. Delivered to a 50 single-ended load via the RF matching network in [1] and [2] Output power is programmable, and full range is available in all frequency bands Delivered to a 50 single-ended load via the RF matching network in [1] and [2] Measured on [1] and [2] with CW, maximum output power Harmonics, radiated 2nd Harm, 433 MHz 3rd Harm, 433 MHz −49 −40 dBm dBm 2nd Harm, 868 MHz 3rd Harm, 868 MHz −47 −55 dBm dBm 2nd Harm, 915 MHz 3rd Harm, 915 MHz −50 −54 dBm dBm Harmonics, conducted The antennas used during the radiated measurements (SMAFF-433 from R.W. Badland and Nearson S331 868/915) play a part in attenuating the harmonics Note: All harmonics are below –41.2 dBm when operating in the 902 - 928 MHz band Measured with +10 dBm CW at 315 MHz and 433 MHz 315 MHz < −35 < −53 dBm dBm Frequencies below 960 MHz Frequencies above 960 MHz 433 MHz −43 < −45 dBm dBm Frequencies below 1 GHz Frequencies above 1 GHz 868 MHz 2nd Harm other harmonics −36 < −46 dBm dBm Measured with +12 dBm CW at 868 MHz −34 dBm Measured with +11 dBm CW at 915 MHz (requirement is −20 dBc under FCC 15.247) < −50 dBm 915 MHz 2nd Harm other harmonics SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Parameter Min Typ Max Unit Condition/Note Spurious emissions conducted, harmonics not included 315 MHz < −58 < −53 dBm dBm Measured with +10 dBm CW at 315 MHz and 433 MHz Frequencies below 960 MHz Frequencies above 960 MHz 433 MHz < −50 < −54 < −56 dBm dBm dBm Frequencies below 1 GHz Frequencies above 1 GHz Frequencies within 47-74, 87.5-118, 174-230, 470-862 MHz 868 MHz < −50 < −52 < −53 dBm dBm dBm Measured with +12 dBm CW at 868 MHz Frequencies below 1 GHz Frequencies above 1 GHz Frequencies within 47-74, 87.5-118, 174-230, 470-862 MHz All radiated spurious emissions are within the limits of ETSI. The peak conducted spurious emission is −53 dBm at 699 MHz (868 MHz - 169 MHz), which is in a frequency band limited to −54 dBm by EN 300 220 V2.3.1. An alternative filter can be used to reduce the emission at 699 MHz below −54 dBm, for conducted measurements, and is shown in Figure 4. See more information in DN017 [5]. For compliance with modulation bandwidth requirements under EN 300 220 V2.3.1 in the 863 to 870 MHz frequency range it is recommended to use a 26 MHz crystal for frequencies below 869 MHz and a 27 MHz crystal for frequencies above 869 MHz. 915 MHz TX latency < −51 < −54 dBm dBm 8 bit Measured with +11 dBm CW at 915 MHz Frequencies below 960 MHz Frequencies above 960 MHz Serial operation. Time from sampling the data on the transmitter data input pin until it is observed on the RF output ports Table 7: RF Transmit Section Supply Voltage VDD = 1.8 V Supply Voltage VDD = 3.0 V Supply Voltage VDD = 3.6 V Temperature [°C] −40 25 85 −40 25 85 −40 25 85 Output Power [dBm], PATABLE=0xC0, +12 dBm 12 11 10 12 12 11 12 12 11 Output Power [dBm], PATABLE=0xC5, +10 dBm 11 10 9 11 10 10 11 10 10 Output Power [dBm], PATABLE=0x50, 0 dBm 1 0 -1 2 1 0 2 1 0 Table 8: Typical Variation in Output Power over Temperature and Supply Voltage, 868 MHz Supply Voltage VDD = 1.8 V Supply Voltage VDD = 3.0 V Supply Voltage VDD = 3.6 V Temperature [°C] −40 25 85 −40 25 85 −40 25 85 Output Power [dBm], PATABLE=0xC0, +11 dBm 11 10 10 12 11 11 12 11 11 Output Power [dBm], PATABLE=0x8E, +0 dBm 2 1 0 2 1 0 2 1 0 Table 9: Typical Variation in Output Power over Temperature and Supply Voltage, 915 MHz SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 4.3 Crystal Oscillator TA = 25 C, VDD = 3.0 V if nothing else is stated. All measurement results obtained using [1] and [2]. Parameter Min Typ Max Unit Condition/Note Crystal frequency 26 26 27 MHz For compliance with modulation bandwidth requirements under EN 300 220 V2.3.1 in the 863 to 870 MHz frequency range it is recommended to use a 26 MHz crystal for frequencies below 869 MHz and a 27 MHz crystal for frequencies above 869 MHz. ppm This is the total tolerance including a) initial tolerance, b) crystal loading, c) aging, and d) temperature dependence. The acceptable crystal tolerance depends on RF frequency and channel spacing / bandwidth. Tolerance Load capacitance ±40 10 13 20 ESR pF Simulated over operating conditions µs This parameter is to a large degree crystal dependent. Measured on [1] and [2] using crystal AT-41CD2 from NDK 100 Start-up time 150 Table 10: Crystal Oscillator Parameters 4.4 Frequency Synthesizer Characteristics TA = 25 C, VDD = 3.0 V if nothing else is stated. All measurement results are obtained using [1] and [2]. Min figures are given using a 27 MHz crystal. Typ. and max figures are given using a 26 MHz crystal. Parameter Min Typ Max Unit Programmed frequency resolution 397 FXOSC/2 412 Hz 16 Condition/Note 26 - 27 MHz crystal. The resolution (in Hz) is equal for all frequency bands Synthesizer frequency tolerance ±40 ppm Given by crystal used. Required accuracy (including temperature and aging) depends on frequency band and channel bandwidth / spacing RF carrier phase noise –92 dBc/Hz @ 50 kHz offset from carrier RF carrier phase noise –92 dBc/Hz @ 100 kHz offset from carrier RF carrier phase noise –92 dBc/Hz @ 200 kHz offset from carrier RF carrier phase noise –98 dBc/Hz @ 500 kHz offset from carrier RF carrier phase noise –107 dBc/Hz @ 1 MHz offset from carrier RF carrier phase noise –113 dBc/Hz @ 2 MHz offset from carrier RF carrier phase noise –119 dBc/Hz @ 5 MHz offset from carrier RF carrier phase noise –129 dBc/Hz @ 10 MHz offset from carrier PLL turn-on time ( See Table 20) 72 75 75 s Time from leaving the IDLE state until arriving in the FSTXON or TX state, when not performing calibration. Crystal oscillator running. PLL calibration time (See Table 21) 685 712 724 s Calibration can be initiated manually or automatically before entering or after leaving TX Table 11: Frequency Synthesizer Parameters SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 4.5 DC Characteristics TA = 25 C if nothing else stated. Digital Inputs/Outputs Min Max Unit Logic "0" input voltage 0 0.7 V Condition Logic "1" input voltage VDD – 0.7 VDD V Logic "0" output voltage 0 0.5 V For up to 4 mA output current Logic "1" output voltage VDD – 0.3 VDD V For up to 4 mA output current Logic "0" input current N/A –50 nA Input equals 0 V Logic "1" input current N/A 50 nA Input equals VDD Table 12: DC Characteristics 4.6 Power-On Reset For proper Power-On-Reset functionality the power supply should comply with the requirements in Table 13 below. Otherwise, the chip should be assumed to have unknown state until transmitting an SRES strobe over the SPI interface. See Section 15.1 on page 28 for further details. Parameter Min Typ Max Unit Condition/Note 5 ms From 0 V until reaching 1.8 V ms Minimum time between power-on and power-off Power-up ramp-up time Power off time 1 Table 13: Power-On Reset Requirements 5 Pin Configuration GND RBIAS DGUARD SI GND The CC115L pin-out is shown in Figure 1 and Table 14. See Section 21 for details on the I/O configuration. 20 19 18 17 16 SCLK 1 15 AVDD SO (GDO1) 2 14 AVDD GDO2 3 13 RF_N DVDD 4 12 RF_P DCOUPL 5 11 AVDD 9 10 XOSC_Q2 XOSC_Q1 8 AVDD 7 CSn GDO0 6 GND Exposed die attach pad Figure 1: Pinout Top View Note: The exposed die attach pad must be connected to a solid ground plane as this is the main ground connection for the chip SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Pin # Pin Name Pin type Description 1 SCLK Digital Input Serial configuration interface, clock input 2 SO (GDO1) Digital Output Serial configuration interface, data output Optional general output pin when CSn is high 3 GDO2 Digital Output Digital output pin for general use: Test signals TX FIFO status signals Clock output, down-divided from XOSC 4 DVDD Power (Digital) 1.8 - 3.6 V digital power supply for digital I/O‟s and for the digital core voltage regulator 5 DCOUPL Power (Digital) 1.6 - 2.0 V digital power supply output for decoupling NOTE: This pin is intended for use with the CC115L only. It cannot be used to provide supply voltage to other devices 6 GDO0 Digital I/O Digital output pin for general use: Test signals TX FIFO status signals Clock output, down-divided from XOSC Serial input TX data 7 CSn Digital Input Serial configuration interface, chip select 8 XOSC_Q1 Analog I/O Crystal oscillator pin 1, or external clock input 9 AVDD Power (Analog) 1.8 - 3.6 V analog power supply connection 10 XOSC_Q2 Analog I/O Crystal oscillator pin 2 11 AVDD Power (Analog) 1.8 - 3.6 V analog power supply connection 12 RF_P RF I/O Positive RF output signal from PA in transmit mode 13 RF_N RF I/O Negative RF output signal from PA in transmit mode 14 AVDD Power (Analog) 1.8 - 3.6 V analog power supply connection 15 AVDD Power (Analog) 1.8 - 3.6 V analog power supply connection 16 GND Ground (Analog) Analog ground connection 17 RBIAS Analog I/O External bias resistor for reference current 18 DGUARD Power (Digital) Power supply connection for digital noise isolation 19 GND Ground (Digital) Ground connection for digital noise isolation 20 SI Digital Input Serial configuration interface, data input Table 14: Pinout Overview SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 6 Circuit Description BIAS XOSC RBIAS XOSC_Q1 XOSC_Q2 DIGITAL INTERFACE TO MCU PA TX FIFO RF_N FREQ SYNTH PACKET HANDLER RF_P MODULATOR RADIO CONTROL SCLK SO (GDO1) SI CSn GDO0 GDO2 Figure 2: CC115L Simplified Block Diagram A simplified block diagram of CC115L is shown in Figure 2. reference frequency for the synthesizer, as well as clocks for the digital part. The CC115L transmitter is based on direct synthesis of the RF frequency. The frequency synthesizer includes a completely on-chip LC VCO. A 4-wire SPI serial interface is used for configuration and data buffer access. A crystal is to be connected to XOSC_Q1 and XOSC_Q2. The crystal oscillator generates the The digital baseband includes support for channel configuration, packet handling, and data buffering. 7 Application Circuit The low cost application circuits ([10] and [11]), which use multi layer inductors, are shown in Figure 3 and Figure 4 (see Table 15 for component values). The designs in [1] and [2] were used for CC115L characterization. The 315 MHz and 433 MHz design [1] use inexpensive multi-layer inductors similar to the low cost application circuit while the 868 MHz and 915 MHz design [2] use wire-wound inductors. Wire-wound inductors give better output power and 7.1 attenuation of harmonics compared to using multi-layer inductors. Refer to design note DN032 [9] for information about performance when using wire-wound inductors from different vendors. See also Design Note DN013 [7], which gives the output power and harmonics when using multi-layer inductors. The output power is then typically +10 dBm when operating at 868/915 MHz. Bias Resistor The 56 kΩ bias resistor R171 is used to set an SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 accurate bias current. HTTP://WWW.SZRFSTAR.COM CC115L 7.2 Balun and RF Matching The balun and LC filter component values their placement are important to keep performance optimized. Gerber files schematics for the reference designs available for download from the TI website and the and are The components between the RF_N/RF_P pins and the point where the two signals are joined together (C131, C122, L122, and L132 in Figure 3 and L121, L131, C121, L122, C131, C122, and L132 in Figure 4) form a balun that converts the differential RF signal on CC115L to a single-ended RF signal. C124 is needed for DC blocking. 1.8 V - 3.6 V power supply L123, L124, and C123 ( plus C125 in Figure 3) form a low-pass filter for harmonics attenuation. The balun and LC filter components also matches the CC115L input impedance to a 50 load. C126 provides DC blocking and is only needed if there is a DC path in the antenna. For the application circuit in Figure 4, this component may also be used for additional filtering, see section 7.5. R171 1 SCLK 2 SO (GDO1) 3 GDO2 GND 16 RBIAS 17 DGUARD 18 SI 20 SO (GDO1) GDO2 (optional) AVDD 14 C131 L132 C126 RF_N 13 DIE ATTACH PAD: 9 AVDD 7 CSn 5 DCOUPL 10 XOSC_Q2 RF_P 12 8 XOSC_Q1 4 DVDD C51 Antenna (50 Ohm) AVDD 15 CC115L 6 GDO0 Digital Inteface SCLK GND 19 SI AVDD 11 C122 L122 L123 L124 C123 C125 C124 GDO0 (optional) CSn XTAL C81 C101 Figure 3: Typical Application and Evaluation Circuit 315/433 MHz (excluding supply decoupling capacitors) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 1.8 V - 3.6 V power supply R171 4 DVDD GND 16 AVDD 14 L132 L131 C126 RF_N 13 L123 AVDD 11 L124 C121 C122 DIE ATTACH PAD: RF_P 12 7 CSn C51 AVDD 15 CC115L 5 DCOUPL Antenna (50 Ohm) C131 10 XOSC_Q2 3 GDO2 9 AVDD 2 SO (GDO1) RBIAS 17 GND 19 1 SCLK 8 XOSC_Q1 SO (GDO1) GDO2 (optional) 6 GDO0 Digital Interface SCLK DGUARD 18 SI 20 SI L121 C123 L122 GDO0 (optional) CSn C127 L125 C127 and L125 may be added to build an optional filter to reduce emission at 699 MHz C124 XTAL C81 C101 Figure 4: Typical Application and Evaluation Circuit 868/915 MHz (excluding supply decoupling capacitors) Component Value at 315 MHz Value at 433 MHz C121 Value at 868/915 MHz Without C127 and L125 With C127 and L125 1 pF 1 pF C122 6.8 pF 3.9 pF 1.5 pF 1.5 pF C123 12 pF 8.2 pF 3.3 pF 3.3 pF C124 220 pF 220 pF 100 pF 100 pF C125 6.8 pF 5.6 pF C126 220 pF 220 pF 100 pF 12 pF C127 C131 47 pF 6.8 pF 3.9 pF L121 1.5 pF 1.5 pF 12 nH 12 nH L122 33 nH 27 nH 18 nH 18 nH L123 18 nH 22 nH 12 nH 12 nH L124 33 nH 27 nH 12 nH 12 nH L125 3.3 nH L131 L132 33 nH 27 nH 12 nH 12 nH 18 nH 18 nH Table 15: External Components 7.3 Crystal A crystal in the frequency range 26 - 27 MHz must be connected between the XOSC_Q1 and XOSC_Q2 pins. The oscillator is designed for parallel mode operation of the crystal. In addition, loading capacitors (C81 and C101) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 for the crystal are required. The loading capacitor values depend on the total load capacitance, CL, specified for the crystal. The total load capacitance seen between the HTTP://WWW.SZRFSTAR.COM CC115L crystal terminals should equal CL for the crystal to oscillate at the specified frequency. CL 1 1 C81 1 C101 C parasitic The parasitic capacitance is constituted by pin input capacitance and PCB stray capacitance. Total parasitic capacitance is typically 2.5 pF. The crystal oscillator is amplitude regulated. This means that a high current is used to start up the oscillations. When the amplitude builds up, the current is reduced to what is necessary to maintain approximately 0.4 Vpp signal swing. This ensures a fast start-up, and keeps the drive level to a minimum. The ESR of the crystal should be within the specification in 7.4 For compliance with modulation bandwidth requirements under EN 300 220 V2.3.1 in the 863 to 870 MHz frequency range it is recommended to use a 26 MHz crystal for frequencies below 869 MHz and a 27 MHz crystal for frequencies above 869 MHz. connected to XOSC_Q1 using a serial capacitor. When using a full-swing digital signal, this capacitor can be omitted. The XOSC_Q2 line must be left un-connected. C81 and C101 can be omitted when using a reference signal. If this filtering is not necessary, C126 will work as a DC block (only necessary if there is a DC path in the antenna). C127 and L125 should in that case be left unmounted. Additional external components (e.g. an RF SAW filter) may be used in order to improve the performance in specific applications. Power Supply Decoupling The power supply must be properly decoupled close to the supply pins. Note that decoupling capacitors are not shown in the application circuit. The placement and the size of the 7.7 Avoid routing digital signals with sharp edges close to XOSC_Q1 PCB track or underneath the crystal Q1 pad as this may shift the crystal dc operating point and result in duty cycle variation. Additional Filtering In the 868/915 MHz reference design [10], C127 and L125 together with C126 build an optional filter to reduce emission at carrier frequency - 169 MHz. This filter is necessary for applications with an external antenna connector that seek compliance with ETSI EN 300 220 V2.3.1. For more information, see DN017 [5]. 7.6 The initial tolerance, temperature drift, aging and load pulling should be carefully specified in order to meet the required frequency accuracy in a certain application. Reference Signal The chip can alternatively be operated with a reference signal from 26 to 27 MHz instead of a crystal. This input clock can either be a fullswing digital signal (0 V to VDD) or a sine wave of maximum 1 V peak-peak amplitude. The reference signal must be connected to the XOSC_Q1 input. The sine wave must be 7.5 order to ensure a reliable start-up (see Section 4.3 on page 9). decoupling capacitors are very important to achieve the optimum performance ([10] and [11] should be followed closely). PCB Layout Recommendations The top layer should be used for signal routing, and the open areas should be filled with metallization connected to ground using several vias. The area under the chip is used for grounding and shall be connected to the bottom ground plane with several vias for good thermal performance and sufficiently low inductance to ground. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 In [10] and [11] and [2], 5 vias are placed inside the exposed die attached pad. These vias should be “tented” (covered with solder mask) on the component side of the PCB to avoid migration of solder through the vias during the solder reflow process. The solder paste coverage should not be 100%. If it is, out gassing may occur during the reflow process, which may cause defects (splattering, solder balling). Using “tented” vias reduces the solder paste coverage below HTTP://WWW.SZRFSTAR.COM CC115L 100%. See Figure 5 for top solder resist and top paste masks. Each decoupling capacitor should be placed as close as possible to the supply pin it is supposed to decouple. Each decoupling capacitor should be connected to the power line (or power plane) by separate vias. The best routing is from the power line (or power plane) to the decoupling capacitor and then to the CC115L supply pin. Supply power filtering is very important. Each decoupling capacitor ground pad should be connected to the ground plane by separate vias. Direct connections between neighboring power pins will increase noise coupling and should be avoided unless absolutely necessary. Routing in the ground plane underneath the chip or the balun/RF matching circuit, or between the chip‟s ground vias and the decoupling capacitor‟s ground vias should be avoided. This improves the grounding and ensures the shortest possible current return path. Avoid routing digital signals with sharp edges close to XOSC_Q1 PCB track or underneath the crystal Q1 pad as this may shift the crystal dc operating point and result in duty cycle variation. The external components should ideally be as small as possible (0402 is recommended) and surface mount devices are highly recommended. Please note that components with different sizes than those specified may have differing characteristics. Precaution should be used when placing the microcontroller in order to avoid noise interfering with the RF circuitry. A CC11xL Development Kit with a fully assembled CC115L Evaluation Module is available. It is strongly advised that this reference layout is followed very closely in order to get the best performance. The schematic, BOM and layout Gerber files are all available from the TI website ([10] and [11]). Figure 5: Left: Top Solder Resist Mask (Negative). Right: Top Paste Mask. Circles are Vias SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 8 Configuration Overview CC115L can be configured to achieve optimum RF output power Data buffering with the 64-byte TX FIFO Packet radio hardware support performance for many different applications. Configuration is done using the SPI interface. See Section 10 for more description of the SPI interface. The following key parameters can be programmed: Details of each configuration register can be found in Section 24, starting on page 38. Figure 6 shows a simplified state diagram that explains the main CC115L states together with typical usage and current consumption. For detailed information on controlling the CC115L state machine, and a complete state diagram, see Section 15, starting on page 28. Power-down / power up mode Crystal oscillator power-up / power-down Carrier frequency / RF channel Transmit mode Data rate Modulation format Lowest power mode. Most register values are retained. Typ. current consumption: 200 nA Sleep SPWD SIDLE Default state when the radio is not transmitting. Typ. current consumption: 1.7 mA. Used for calibrating frequency synthesizer upfront (entering Manual freq. transmit mode can then be synth. calibration done quicker). Transitional state. Typ. current consumption: 8.4 mA. Frequency synthesizer is on, ready to start transmitting. Transmission starts very quickly after receiving the STX command strobe.Typ. current consumption: 8.4 mA. CSn=0 IDLE SXOFF SCAL CSn=0 STX or SFSTXON Frequency synthesizer startup, optional calibration, settling SFSTXON All register values are retained. Typ. current consumption: 165 uA. Crystal oscillator off Frequency synthesizer is turned on, can optionally be calibrated, and then settles to the correct frequency. Transitional state. Typ. current consumption: 8.4 mA. Frequency synthesizer on STX STX TXOFF_MODE=01 Typ. current consumption: 16.8 mA at 0 dBm output power, 868 MHz Transmit mode TXOFF_MODE=00 In Normal mode, this state is enetered if the TX FIFO is emptied before the complete packet has been written to the FIFO. Typ. current consumption: 1.7 mA. TX FIFO underflow Optional transitional state. Optional freq. Typ. current consumption: 8.4 mA. synth. calibration SFTX IDLE Figure 6: Simplified Radio Control State Diagram with Typical Current Consumption SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 9 Configuration Software CC115L After chip reset, all the registers have default values as shown in the tables in Section 24.1. The optimum register setting might differ from the default value. After a reset all registers that shall be different from the default value therefore needs to be programmed through the SPI interface. can be configured using the SmartRF Studio software [4]. The SmartRF Studio software is highly recommended for obtaining optimum register settings, and for evaluating performance and functionality. 10 4-wire Serial Configuration and Data Interface CC115L is configured via a simple 4-wire SPI- from/to a register, the transfer will be cancelled. The timing for the address and data transfer on the SPI interface is shown in Figure 7 with reference to Table 16. compatible interface (SI, SO, SCLK and CSn) where CC115L is the slave. This interface is also used to write buffered data. All transfers on the SPI interface are done most significant bit first. When CSn is pulled low, the MCU must wait until CC115L SO pin goes low before starting to transfer the header byte. This indicates that the crystal is running. Unless the chip was in the SLEEP or XOFF states, the SO pin will always go low immediately after pulling CSn low. All transactions on the SPI interface start with a header byte containing a R/W ¯ bit, a burst access bit (B), and a 6-bit address (A5 - A0). The CSn pin must be kept low during transfers on the SPI bus. If CSn goes high during the transfer of a header byte or during read/write tsp tch tcl tsd thd tns SCLK: CSn: Write to register: SI X 0 B A5 A4 A3 A2 A1 A0 SO Hi-Z S7 B S5 S4 S3 S2 S1 S0 X DW7 S7 DW6 DW5 DW4 DW3 DW2 DW1 DW0 S6 S5 S4 S3 S2 S1 S0 DR2 DR1 X Hi-Z Read from register: SI X SO Hi-Z 1 B A5 A4 A3 A2 A1 A0 S7 B S5 S4 S3 S2 S1 S0 X DR7 DR6 DR5 DR4 DR3 DR0 Hi-Z Figure 7: Configuration Registers Write and Read Operations SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Parameter Description Min Max Units fSCLK SCLK frequency 100 ns delay inserted between address byte and data byte (single access), or between address and data, and between each data byte (burst access). - 10 MHz SCLK frequency, single access. No delay between address and data byte - 9 SCLK frequency, burst access No delay between address and data byte, or between data bytes - 6.5 tsp,pd CSn low to positive edge on SCLK, in power-down mode 150 - s tsp CSn low to positive edge on SCLK, in active mode 20 - ns tch Clock high 50 - ns tcl Clock low 50 - ns trise Clock rise time - 40 ns tfall Clock fall time tsd Setup data (negative SCLK edge) to positive edge on SCLK (tsd applies between address and data bytes, and between data bytes) - 40 ns Single access 55 - ns Burst access 76 - thd Hold data after positive edge on SCLK 20 - ns tns Negative edge on SCLK to CSn high. 20 - ns Table 16: SPI Interface Timing Requirements Note: The minimum tsp,pd figure in Table 16 can be used in cases where the user does not read the CHIP_RDYn signal. CSn low to positive edge on SCLK when the chip is woken from powerdown depends on the start-up time of the crystal being used. The 150 μs in Table 16 is the crystal oscillator start-up time measured on [1] and [2] using crystal AT-41CD2 from NDK. 10.1 Chip Status Byte When the header byte, data byte, or command strobe is sent on the SPI interface, the chip status byte is sent by the CC115L on the SO pin. The status byte contains key status signals, useful for the MCU. The first bit, s7, is the CHIP_RDYn signal and this signal must go low before the first positive edge of SCLK. The CHIP_RDYn signal indicates that the crystal is running. Bits 6, 5, and 4 comprise the STATE value. This value reflects the state of the chip. The XOSC and power to the digital core are on in the IDLE state, but all other modules are in power down. The frequency and channel SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 configuration should only be updated when the chip is in this state. The last four bits (3:0) in the status byte contains FIFO_BYTES_AVAILABLE. For these bits to give any valid information, the R/W ¯ bit in the header byte must be set to 0. The FIFO_BYTES_AVAILABLE field will then contain the number of bytes that can be written to the TX FIFO. When FIFO_BYTES_AVAILABLE=15, 15 or more bytes can be written. Table 17 gives a status byte summary HTTP://WWW.SZRFSTAR.COM CC115L Bits Name Description 7 CHIP_RDYn Stays high until power and crystal have stabilized. Should always be low when using the SPI interface. 6:4 STATE[2:0] Indicates the current main state machine mode 3:0 FIFO_BYTES_AVAILABLE[3:0] Value State Description 000 IDLE IDLE state (Also reported for some transitional states instead of SETTLING or CALIBRATE) 001 Reserved 010 TX Transmit mode 011 FSTXON Fast TX ready 100 CALIBRATE Frequency synthesizer calibration is running 101 SETTLING PLL is settling 110 Reserved 111 TXFIFO_UNDERFLOW TX FIFO has underflowed. Acknowledge with SFTX The number of bytes that can be written to the TX FIFO Table 17: Status Byte Summary 10.2 Register Access The configuration registers on the CC115L are located on SPI addresses from 0x00 to 0x2E. Table 29 on page 40 lists all configuration registers. It is highly recommended to use SmartRF Studio [4] to generate optimum register settings. The detailed description of each register is found in Section 24.1 and 24.2, starting on page 42. All configuration registers can be both written to and read. The R/W ¯ bit controls if the register should be written to or read. When writing to registers, the status byte is sent on the SO pin each time a header byte or data byte is transmitted on the SI pin. When reading from registers, the status byte is sent on the SO pin each time a header byte is transmitted on the SI pin. Registers with consecutive addresses can be accessed in an efficient way by setting the burst bit (B) in the header byte. The address bits (A5 - A0) set the start address in an internal address counter. This counter is incremented by one each new byte (every 8 clock pulses). The burst access is either a read or a write access and must be terminated by setting CSn high. For register addresses in the range 0x30 - 0x3D, the burst bit is used to select between status registers when burst bit is one, and command strobes when burst bit is zero. See more in Section 10.3 below. Because of this, burst access is not available for status registers and they must be accessed one at a time. The status registers can only be read. 10.3 SPI Read When reading register fields over the SPI interface while the register fields are updated by the radio hardware (e.g. MARCSTATE or TXBYTES), there is a small, but finite, probability that a single read from the register SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 is being corrupt. As an example, the probability of any single read from TXBYTES being corrupt, assuming the maximum data rate is used, is approximately 80 ppm. Refer to the CC115L Errata Notes [3] for more details. HTTP://WWW.SZRFSTAR.COM CC115L 10.4 Command Strobes Command Strobes may be viewed as single byte instructions to CC115L. By addressing a command strobe register, internal sequences will be started. These commands are used to disable the crystal oscillator, enable TX mode, enable calibration etc. The 9 command strobes are listed in Table 28 on page 39. Note: An SIDLE strobe will clear all pending command strobes until IDLE state is reached. This means that if for example an SIDLE strobe is issued while the radio is in TX state, any other command strobes issued before the radio reaches IDLE state will be ignored. The command strobe registers are accessed by transferring a single header byte (no data is being transferred). That is, only the R/W ¯ bit, the burst access bit (set to 0), and the six address bits (in the range 0x30 through 0x3D) are written. The R/W ¯ bit should be set to zero if the FIFO_BYTES_AVAILABLE field in the status byte should be interpreted. When writing command strobes, the status byte is sent on the SO pin. A command strobe may be followed by any other SPI access without pulling CSn high. However, if an SRES strobe is being issued, one will have to wait for SO to go low again before the next header byte can be issued as shown in Figure 8. The command strobes are executed immediately, with the exception of the SPWD and the SXOFF strobes, which are executed when CSn goes high. CSn SO HeaderSRES SI HeaderAddr Data Figure 8: SRES Command Strobe 10.5 TX FIFO Access The 64-byte TX FIFO is accessed through the 0x3F address. The TX FIFO is write-only and the R/W ¯ bit should therefore be zero. The burst bit is used to determine if the TX FIFO access is a single byte access or a burst access. The single byte access method expects a header byte with the burst bit set to zero and one data byte. After the data byte, a new header byte is expected; hence CSn can remain low. The burst access method expects one header byte and then consecutive data bytes until terminating the access by setting CSn high. The following TX FIFO: header bytes access the 0x3F: Single byte access to TX FIFO 0x7F: Burst access to TX FIFO When writing to the TX FIFO, the status byte (see Section 10.1) is output on SO for each new data byte as shown in Figure 7. This status byte can be used to detect TX FIFO underflow while writing data to the TX FIFO. Note that the status byte contains the number of bytes free before writing the byte in progress to the TX FIFO. When the last byte that fits in the TX FIFO is transmitted on SI, the status byte received concurrently on SO will indicate that one byte is free in the TX FIFO. The TX FIFO may be flushed by issuing a SFTX command strobe. A SFTX command strobe can only be issued in the IDLE, or TXFIFO_UNDERFLOW states. The TX FIFO is flushed when going to the SLEEP state. Figure 9 gives a brief overview of different register access types possible. 10.6 PATABLE Access The 0x3E address is used to access the PATABLE, which is used for selecting PA power control settings. The SPI expects one or two data bytes after receiving the address (the burst bit must be set if two bytes are to be written). For OOK, two bytes should be written SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 to PATABLE; the first byte after the address will set the logic 0 power level and the second byte written will set the logic 1 power level. For all other modulations formats, only one byte should be written to PATABLE. Use SmartRF HTTP://WWW.SZRFSTAR.COM CC115L Studio [4] or DN013 [7] for recommended register values for a given output power. The PATABLE can also be read by setting the R/W ¯ bit to 1. The read operation can be done as a single byte or burst access, depending on how many bytes should be read (one or two). Note that pulling CSn high will reset the index counter to zero, meaning that burst access needs to be used for reading/writing the second PATABLE entry. For the same reason, if one byte is written to the PATABLE and this value is to be read out, CSn must be set high before the read access in order to set the index counter back to zero. Note that the content of the PATABLE is lost when entering the SLEEP state, except for the first byte, meaning that if OOK is used, the PATABLE needs to be reprogrammed when waking up from SLEEP. Csn Command strobe(s) HeaderStrobe HeaderStrobe HeaderStrobe Read or write register(s) HeaderReg Data HeaderReg Data Read or write consecutive register(s) HeaderReg n Datan Data n + 1 Datan + 2 Write n + 1 bytes to the TX FIFO HeaderTX FIFO DataByte 0 DataByte 1 DataByte 2 ......... DataByte n - 1 DataByte n HeaderReg Data HeaderStrobe HeaderReg Data HeaderStrobe HeaderTX FIFO Combinations HeaderReg Data ......... ......... ......... DataByte 0 DataByte 1 .... Figure 9: Register Access Types 11 Microcontroller Interface and Pin Configuration In a typical system, CC115L will interface to a microcontroller. This microcontroller must be able to: Program CC115L into different modes Write buffered data Read back status information via the 4-wire SPI-bus configuration interface (SI, SO, SCLK and CSn) 11.1 Configuration Interface The microcontroller uses four I/O pins for the SPI configuration interface (SI, SO, SCLK and CSn). The SPI is described in Section 10 on page 18. 11.2 General Control and Status Pins The CC115L has two dedicated configurable pins (GDO0 and GDO2) and one shared pin (GDO1) that can output internal status information useful for control software. These pins can be used to generate interrupts on the MCU. See Section 21 on page 34 for more details on the signals that can be programmed. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 GDO1 is shared with the SO pin in the SPI interface. The default setting for GDO1/SO is 3-state output. By selecting any other of the programming options, the GDO1/SO pin will become a generic pin. When CSn is low, the pin will always function as a normal SO pin. In the synchronous and asynchronous serial modes, the GDO0 pin is used as a serial TX data input pin while in transmit mode. HTTP://WWW.SZRFSTAR.COM CC115L 12 Data Rate Programming The data rate used when transmitting is programmed by the MDMCFG3.DRATE_M and the MDMCFG4.DRATE_E configuration registers. The data rate is given by the formula below. As the formula shows, the programmed data rate depends on the crystal frequency. RDATA (256 DRATE _ M ) 2 DRATE _ E f XOSC 2 28 The following approach can be used to find suitable values for a given data rate: DRATE _ E log2 RDATA 220 f XOSC according to Table 18 below. See Table 3 for the minimum and maximum data rates for the different modulation formats. Min Data Rate [kBaud] Typical Data Rate [kBaud] Max Data Rate [kBaud] Data rate Step Size [kBaud] 0.6 1.0 0.79 0.0015 0.79 1.2 1.58 0.0031 1.59 2.4 3.17 0.0062 3.17 4.8 6.33 0.0124 6.35 9.6 12.7 0.0248 12.7 19.6 25.3 0.0496 25.4 38.4 50.7 0.0992 50.8 76.8 101.4 0.1984 101.6 153.6 202.8 0.3967 203.1 250 405.5 0.7935 406.3 500 500 1.5869 28 DRATE _ M RDATA 2 f XOSC 2 DRATE _ E 256 If DRATE_M is rounded to the nearest integer and becomes 256, increment DRATE_E and use DRATE_M = 0. Table 18: Data Rate Step Size (assuming a 26 MHz crystal) The data rate can be set from 0.6 kBaud to 500 kBaud with the minimum step size SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 13 Packet Handling Hardware Support The CC115L has built-in hardware support for packet oriented radio protocols. The packet handler can be configured to add the following elements to the packet stored in the TX FIFO: A programmable number of preamble bytes A two byte synchronization (sync) word. Can be duplicated to give a 4-byte sync word. It is not possible to only insert preamble or only insert a sync word A CRC checksum computed over the data field. In a system where the CC115L is transmitting packets to the CC110L, CC113L or CC1101, the recommended setting is 4byte preamble and 4-byte sync word, except for 500 kBaud data rate where the recommended preamble length is 8 bytes. Note: Register fields that control the packet handling features should only be altered when CC115L is in the IDLE state. 13.1 Packet Format The format of the data packet can be configured and consists of the following items (see Figure 10): Preamble Synchronization word Optional length byte Optional address byte Payload Optional 2 byte CRC Legend: Data field 16/32 bits 8 bits 8 bits 8 x n bits Inserted automatically CRC-16 Address field 8 x n bits Length field Preamble bits (1010...1010) Sync word Optional CRC-16 calculation OptIonal user-provided fields (the length field is processed by the radio) Unprocessed user data 16 bits Figure 10: Packet Format The preamble pattern is an alternating sequence of ones and zeros (10101010…). The minimum length of the preamble is programmable through the value of MDMCFG1.NUM_PREAMBLE. When enabling TX, the modulator will start transmitting the preamble. When the programmed number of preamble bytes has been transmitted, the modulator will send the sync word and then data from the TX FIFO if data is available. If the TX FIFO is empty, the modulator will continue to send preamble bytes until the first byte is written to the TX FIFO. The modulator will then send the sync word and then the data bytes. The synchronization word is a two-byte value set in the SYNC1 and SYNC0 registers. If the CC110L, CC113L, or CC1101 are used at the receiving end, they will need the sync word for byte synchronization of the incoming packet. The synchronization word is automatically SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 inserted by the CC115L. A one-byte sync word can be emulated by setting the SYNC1 value to the preamble pattern. It is also possible to emulate a 32 bit sync word by setting MDMCFG2.SYNC_MODE to 3. The sync word will then be repeated twice. CC115L supports both constant packet length protocols and variable length protocols. Variable or fixed packet length mode can be used for packets up to 255 bytes. For longer packets, infinite packet length mode must be used. Fixed packet length mode is selected by setting PKTCTRL0.LENGTH_CONFIG=0. The desired packet length is set by the PKTLEN register. This value must be different from 0. In variable packet length mode, PKTCTRL0.LENGTH_CONFIG=1, the packet length is configured by the first byte HTTP://WWW.SZRFSTAR.COM CC115L transmitted after the sync word. The packet length is defined as the payload data, excluding the length byte and the optional CRC. The PKTLEN value must be different from 0 With PKTCTRL0.LENGTH_CONFIG=2, the packet length is set to infinite and transmission will continue until turned off manually. As described in the next section, this can be used to support packet formats with different length configuration than natively supported by CC115L. One should make sure that TX mode is not turned off during the transmission of the first half of any byte. Refer to the CC115L Errata Notes [3] for more details. Note: The minimum packet length supported (excluding the optional length byte and CRC) is one byte of payload data. 13.1.1 Packet Length > 255 The packet automation control register, PKTCTRL0, can be reprogrammed during TX. This opens the possibility to transmit packets that are longer than 256 bytes and still be able to use the packet handling hardware support. At the start of the packet, the infinite packet length mode (PKTCTRL0.LENGTH_CONFIG=2) must be active and the PKTLEN register is set to mod(length, 256). When less than 256 bytes remains of the packet, the MCU disables infinite packet length mode and activates fixed packet length mode (PKTCTRL0.LENGTH_CONFIG=0). When the internal byte counter reaches the PKTLEN value, the transmission ends (the radio enters the state determined by TXOFF_MODE). Automatic CRC appending/checking can also be used (by setting PKTCTRL0.CRC_EN=1). When for example a 600-byte packet is to be transmitted, the MCU should do the following (see also Figure 11) Set PKTCTRL0.LENGTH_CONFIG=2. Pre-program the PKTLEN mod(600, 256) = 88. register to Transmit at least 345 bytes (600 - 255), for example by filling the 64-byte TX FIFO six times (384 bytes transmitted). Set PKTCTRL0.LENGTH_CONFIG=0. The transmission ends when the packet counter reaches 88. A total of 600 bytes are transmitted. Internal byte counter in packet handler counts from 0 to 255 and then starts at 0 again 0, 1............, 88, .............................................255, 0, ........, 88, .............................................255, 0, ........, 88, .............................................255, 0, .. Infinite packet length mode enabled Length field transmitted. PKTLEN set to mod(600, 256) = 88 Fixed packet length mode anbled when less than 256 bytes remains of packet 600 bytes transmitted Figure 11: Packet Length > 255 13.2 Packet Handling The payload that is to be transmitted must be written into the TX FIFO. The first byte written must be the length byte when variable packet length is enabled. The length byte has a value equal to the payload of the packet (including the optional address byte). If the receiver is the CC110L, CC113L, or CC1101, and address recognition is enabled, the second byte written to the TX FIFO must be the address byte. If fixed packet length is enabled, the first byte written to the TX FIFO should be the address (assuming the receiver uses address recognition). SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 The modulator will first send the programmed number of preamble bytes. If data is available in the TX FIFO, the modulator will send the two-byte (optionally 4-byte) sync word followed by the payload in the TX FIFO. If CRC is enabled, the checksum is calculated over all the data pulled from the TX FIFO, and the result is sent as two extra bytes following the payload data. If the TX FIFO runs empty before the complete packet has been transmitted, the radio will enter TXFIFO_UNDERFLOW state. The only way to exit this state is by issuing an SFTX strobe. Writing to the TX FIFO after it has underflowed will not restart TX mode. HTTP://WWW.SZRFSTAR.COM CC115L 13.3 Packet Handling in Firmware IOCFGx.GDOx_CFG=0x03). See Table 27 for more information. When implementing a packet oriented radio protocol in firmware, the MCU needs to know when a packet has been transmitted. Additionally, for packets longer than 64 bytes, the TX FIFO needs to be refilled while in TX. This means that the MCU needs to know the number of bytes that can be written to the TX FIFO. There are two possible solutions to get the necessary status information: b) SPI Polling The PKTSTATUS register can be polled at a given rate to get information about the current GDO2 and GDO0 values. The TXBYTES register can be polled at a given rate to get information about the number of bytes in the TX FIFO. Alternatively, the number of bytes in the TX FIFO can be read from the chip status byte returned on the MISO line each time a header byte, data byte, or command strobe is sent on the SPI bus. a) Interrupt Driven Solution The GDO pins can be used to give an interrupt when a sync word has been transmitted or when a complete packet has been transmitted by setting IOCFGx.GDOx_CFG=0x06. In addition, there are two configurations for the IOCFGx.GDOx_CFG register that can be used as an interrupt source to provide information on how many bytes that are in the TX FIFO (IOCFGx.GDOx_CFG=0x02 and It is recommended to employ an interrupt driven solution due to a small, but finite, probability that a single read from registers PKTSTATUS and TXBYTES is being corrupt. The same is the case when reading the chip status byte (see Section 10.3 and the CC115L Errata Notes [3]). 14 Modulation Formats CC115L supports amplitude, frequency, and the modulator by MDMCFG2.MANCHESTER_EN=1. phase shift modulation formats. The desired modulation format is set in the MDMCFG2.MOD_FORMAT register. Optionally, the data stream can be Manchester coded by setting Note: Manchester encoding is not supported at the same time as using 4-FSK modulation. 14.1 Frequency Shift Keying CC115L supports 2-(G)FSK and 4-FSK modulation. When selecting 4-FSK, the preamble and sync word is sent using 2-FSK (see Figure 12). The symbol encoding is shown in Table 19. The frequency deviation is programmed with the DEVIATION_M and DEVIATION_E values in the DEVIATN register. The value has an exponent/mantissa form, and the resultant deviation is given by: f dev f xosc (8 DEVIATION _ M ) 2 DEVIATION _ E 217 1/Baud Rate Format Symbol Coding 2-FSK/GFSK „0‟ – Deviation „1‟ + Deviation 4-FSK „01‟ – Deviation „00‟ – 1/3∙Deviation „10‟ +1/3∙Deviation „11‟ + Deviation Table 19: Symbol Encoding for 2-FSK/GFSK and 4-FSK Modulation 1/Baud Rate 1/Baud Rate +1 +1/3 -1/3 -1 1 0 1 0 1 0 1 0 Preamble 0xAA 1 1 0 1 0 0 Sync 0xD3 1 1 00 01 01 11 10 00 11 01 Data 0x17 0x8D Figure 12: Data Sent Over the Air (MDMCFG2.MOD_FORMAT=100) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 14.2 Amplitude Modulation The amplitude modulation supported by CC115L is On-Off Keying (OOK). OOK modulation simply turns the PA on or off to modulate ones and zeros respectively. The DEVIATN register setting has no effect when using OOK. 15 Radio Control SIDLE SLEEP 0 SPWD CAL_COMPLETE MANCAL 3,4,5 CSn = 0 IDLE 1 SXOFF SCAL CSn = 0 XOFF 2 STX | SFSTXON FS_WAKEUP 6,7 FS_AUTOCAL = 01 & STX | SFSTXON FS_AUTOCAL = 00 | 10 | 11 & STX | SFSTXON SFSTXON FSTXON 18 SETTLING 9,10 CALIBRATE 8 CAL_COMPLETE STX STX TXOFF_MODE = 01 TX 19,20 TXOFF_MODE = 10 TXFIFO_UNDERFLOW TXOFF_MODE = 00 & FS_AUTOCAL = 10 | 11 CALIBRATE 12 TXOFF_MODE = 00 & FS_AUTOCAL = 00 | 01 TX_UNDERFLOW 22 SFTX IDLE 1 Figure 13: Complete Radio Control State Diagram SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L CC115L has a built-in state machine that is used to switch between different operational states (modes). The change of state is done either by using command strobes or by internal events such as TX FIFO underflow. A simplified state diagram, together with typical usage and current consumption, is shown in Figure 6 on page 17. The complete radio control state diagram is shown in Figure 13. The numbers refer to the state number readable in the MARCSTATE status register. This register is primarily for test purposes. 15.1 Power-On Start-Up Sequence When the power supply is turned on, the system must be reset. This is achieved by one of the two sequences described below, i.e. automatic power-on reset (POR) or manual reset. After the automatic power-on reset or manual reset, it is also recommended to change the signal that is output on the GDO0 pin. The default setting is to output a clock signal with a frequency of CLK_XOSC/192. However, to optimize performance in TX, an alternative GDO setting from the settings found in Table 27 on page 35 should be selected. 15.1.2 Manual Reset The other global reset possibility on CC115L uses the SRES command strobe. By issuing this strobe, all internal registers and states are set to the default, IDLE state. The manual power-up sequence is as follows (see Figure 15): Set SCLK = 1 and SI = 0. Strobe CSn low / high. Hold CSn low and then high for at least 40 µs relative to pulling CSn low Pull CSn low and wait for SO to go low (CHIP_RDYn). 15.1.1 Automatic POR A power-on reset circuit is included in the CC115L. The minimum requirements stated in Table 13 must be followed for the power-on reset to function properly. The internal powerup sequence is completed when CHIP_RDYn goes low. CHIP_RDYn is observed on the SO pin after CSn is pulled low. See Section 10.1 for more details on CHIP_RDYn. When the CC115L reset is completed, the chip will be in the IDLE state and the crystal oscillator will be running. If the chip has had sufficient time for the crystal oscillator to stabilize after the power-on-reset, the SO pin will go low immediately after taking CSn low. If CSn is taken low before reset is completed, the SO pin will first go high, indicating that the crystal oscillator is not stabilized, before going low as shown in Figure 14. Issue the SRES strobe on the SI line. When SO goes low again, reset is complete and the chip is in the IDLE state. XOSC and voltage regulator switched on 40 us CSn SO XOSC Stable SI SRES Figure 15: Power-On Reset with SRES CSn SO XOSC Stable Note that the above reset procedure is only required just after the power supply is first turned on. If the user wants to reset the CC115L after this, it is only necessary to issue an SRES command strobe. Figure 14: Power-On Reset SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 15.2 Crystal Control The crystal oscillator (XOSC) is either automatically controlled or always on, if MCSM0.XOSC_FORCE_ON is set. In the automatic mode, the XOSC will be turned off if the SXOFF or SPWD command strobes are issued; the state machine then goes to XOFF or SLEEP respectively. This can only be done from the IDLE state. The XOSC will be turned off when CSn is released (goes high). The XOSC will be automatically turned on again when CSn goes low. The state machine will then go to the IDLE state. The SO pin on the SPI interface must be pulled low before the SPI interface is ready to be used as described in Section 10.1 on page 19. If the XOSC is forced on, the crystal will always stay on even in the SLEEP state. Crystal oscillator start-up time depends on crystal ESR and load capacitances. The electrical specification for the crystal oscillator can be found in Section 4.3 on page 9. 15.3 Voltage Regulator Control The voltage regulator to the digital core is controlled by the radio controller. When the chip enters the SLEEP state which is the state with the lowest current consumption, the voltage regulator is disabled. This occurs after CSn is released when a SPWD command strobe has been sent on the SPI interface. The chip is then in the SLEEP state. Setting CSn low again will turn on the regulator and crystal oscillator and make the chip enter the IDLE state. 15.4 Transmit Mode (TX) Transmit mode is activated directly by the MCU by using the STX command strobe. The frequency synthesizer must be calibrated regularly. CC115L has one manual calibration option (using the SCAL strobe), and three automatic calibration options that are controlled by the MCSM0.FS_AUTOCAL setting: Calibrate when going from IDLE to TX or FSTXON Calibrate when going from TX to IDLE 1 automatically Calibrate every fourth time when going 3 from TX to IDLE automatically If the radio goes from TX to IDLE by issuing an SIDLE strobe, calibration will not be 1 Not forced in IDLE by issuing an SIDLE strobe SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 performed. The calibration takes a constant number of XOSC cycles; see Table 20 for timing details regarding calibration. When TX is active the chip will remain in the TX state until the current packet has been successfully transmitted. Then the state will change as indicated by the MCSM1.TXOFF_MODE setting. The possible destinations are: IDLE FSTXON: Frequency synthesizer on and ready at the TX frequency. Activate TX with STX TX: Start sending preamble The SIDLE command strobe can always be used to force the radio controller to go to the IDLE state. HTTP://WWW.SZRFSTAR.COM CC115L 15.5 Timing The value of the TEST0, TEST1, and FSCAL3 registers 15.5.1 Overall State Transition Times The main radio controller needs to wait in certain states in order to make sure that the internal analog/digital parts have settled down and are ready to operate in the new states. A number of factors are important for the state transition times: The crystal oscillator frequency, fxosc OOK used or not Table 20 shows timing in crystal clock cycles for key state transitions. Note that the TX to IDLE transition time is a function of data rate (fbaudrate). When OOK is used (i.e. FREND0.PA_POWER=001b), TX to IDLE will require 1/8∙fbaudrate longer times than the time stated in Table 20. The data rate in cases where OOK is used Description Transition Time (FREND0.PA_POWER=0) Transition Time [µs] IDLE to TX/FSTXON, no calibration 1954/fxosc 75.2 IDLE to TX/FSTXON, with calibration 1953/fxosc + FS calibration Time 799 TX to IDLE, no calibration ~0.25/fbaudrate ~1 TX to IDLE, with calibration ~0.25/fbaudrate + FS calibration Time 725 Manual calibration 283/fxosc + FS calibration Time 735 Table 20: Overall State Transition Times (Example for 26 MHz crystal oscillator, 250 kBaud data rate, and TEST0 = 0x0B (maximum calibration time)). 15.5.2 Frequency Time Synthesizer Calibration Table 21 summarizes the frequency synthesizer (FS) calibration times for possible settings of TEST0 and FSCAL3.CHP_CURR_CAL_EN. Setting FSCAL3.CHP_CURR_CAL_EN to 00b disables the charge pump calibration stage. TEST0 is set to the values recommended by SmartRF Studio software [4]. The possible values for TEST0 when operating with different frequency bands are 0x09 and 0x0B. The SmartRF Studio software [4] always sets FSCAL3.CHP_CURR_CAL_EN to 10b. The calibration time can be reduced from 712/724 µs to 145/157 µs. See Section 23.2 on page 37 for more details. TEST0 FSCAL3.CHP_CURR_CAL_EN FS Calibration Time fxosc = 26 MHz FS Calibration Time fxosc = 27 MHz 0x09 00b 3764/fxosc = 145 µs 3764/fxosc = 139 µs 0x09 10b 18506/fxosc = 712 µs 18506/fxosc = 685 µs 0x0B 00b 4073/fxosc = 157 µs 4073/fxosc = 151 µs 0x0B 10b 18815/fxosc = 724 µs 18815/fxosc = 697 µs Table 21. Frequency Synthesizer Calibration Times (26/27 MHz crystal) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 16 TX FIFO The CC115L contains a 64-byte TX FIFO for data to be transmitted and the SPI interface is used to write to the TX FIFO (see Section 10.5 for more details). The FIFO controller will detect underflow in the TX FIFO. A signal will assert when the number of bytes in the TX FIFO is equal to or higher than the programmed threshold. This signal can be viewed on the GDO pins (see Table 27 on page 35). When writing to the TX FIFO it is the responsibility of the MCU to avoid TX FIFO overflow. A TX FIFO overflow will result in an error in the TX FIFO content. Figure 16 shows the number of bytes in the TX FIFO when the threshold signal toggles in the case of FIFO_THR=13. Figure 17 shows the signal on the GDO pin as the TX FIFO is filled above the threshold, and then drained below in the case of FIFO_THR=13. The chip status byte that is available on the SO pin while transferring the SPI header contains the fill grade of the TX FIFO (R/W ¯ = 0). Section 10.1 on page 19 contains more details on this. The number of bytes in the TX FIFO can also be read from the status register TXBYTES.NUM_TXBYTES. The 4-bit FIFOTHR.FIFO_THR setting is used to program threshold points in the TX FIFO. Table 22 lists the 16 FIFO_THR settings and the corresponding thresholds for the TX FIFO. FIFO_THR=13 FIFO_THR Bytes in TX FIFO 0 (0000) 61 1 (0001) 57 2 (0010) 53 3 (0011) 49 4 (0100) 45 5 (0101) 41 6 (0110) 37 NUM_TXBYTES 7 (0111) 33 GDO 8 (1000) 29 9 (1001) 25 10 (1010) 21 11 (1011) 17 12 (1100) 13 13 (1101) 9 14 (1110) 5 15 (1111) 1 Underflow margin 8 bytes TX FIFO Figure 16 Example of TX FIFO at Threshold 6 7 8 9 10 9 8 7 6 Figure 17: Number of Bytes in TX FIFO vs. the GDO Signal (GDOx_CFG=0x02 and FIFO_THR=13) Table 22: FIFO_THR Settings and the Corresponding TX FIFO Thresholds 17 Frequency Programming The frequency programming in CC115L is designed to minimize the programming needed when changing frequency. To set up a system with channel numbers, the desired channel spacing is programmed with the MDMCFG0.CHANSPC_M and MDMCFG1.CHANSPC_E registers. The channel SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 spacing registers are mantissa and exponent respectively. The base or start frequency is set by the 24 bit frequency word located in the FREQ2, FREQ1, and FREQ0 registers. This word will typically be set to the centre of the lowest channel frequency that is to be used. The desired channel number is programmed with the 8-bit channel number register, HTTP://WWW.SZRFSTAR.COM CC115L CHANNR.CHAN, which is multiplied by the channel offset. The resultant carrier frequency f carrier is given by: f XOSC ( FREQ CHAN ((256 CHANSPC _ M ) 2CHANSPC _ E 2 )) 16 2 With a 26 MHz crystal the maximum channel spacing is 405 kHz. To get e.g. 1 MHz channel spacing, one solution is to use 333 kHz channel spacing and select each third channel in CHANNR.CHAN. The preferred IF frequency is programmed with the FSCTRL1.FREQ_IF register. The IF frequency is given by: f IF f XOSC FREQ _ IF 210 If any frequency programming register is altered when the frequency synthesizer is running, the synthesizer may give an undesired response. Hence, the frequency should only be updated when the radio is in the IDLE state 18 VCO The VCO is completely integrated on-chip. 18.1 VCO and PLL Self-Calibration The VCO characteristics vary with temperature and supply voltage changes as well as with the desired operating frequency. In order to ensure reliable operation, CC115L includes frequency synthesizer self-calibration circuitry. This calibration should be done regularly, and must be performed after turning on power and before using a new frequency (or channel). The number of XOSC cycles for completing the PLL calibration is given in Table 20 on page 30. The calibration can be initiated automatically or manually. The synthesizer can be automatically calibrated each time the synthesizer is turned on, or each time the synthesizer is turned off automatically. This is configured with the MCSM0.FS_AUTOCAL register setting. In manual mode, the calibration is initiated when the SCAL command strobe is activated in the IDLE mode. Note: The calibration values are maintained in SLEEP mode, so the calibration is still valid after waking up from SLEEP mode unless supply voltage or temperature has changed significantly. To check that the PLL is in lock, the user can program register IOCFGx.GDOx_CFG to 0x0A, and use the lock detector output available on the GDOx pin as an interrupt for the MCU (x = 0,1, or 2). A positive transition on the GDOx pin means that the PLL is in lock. As an alternative the user can read register FSCAL1. The PLL is in lock if the register content is different from 0x3F. Refer also to the CC115L Errata Notes [3]. For more robust operation, the source code could include a check so that the PLL is recalibrated until PLL lock is achieved if the PLL does not lock the first time. 19 Voltage Regulators CC115L contains several on-chip linear voltage regulators that generate the supply voltages needed by low-voltage modules. These voltage regulators are invisible to the user, and can be viewed as integral parts of the various modules. The user must however make sure that the absolute maximum ratings and required pin voltages in Table 1 and Table 14 are not exceeded. By setting the CSn pin low, the voltage regulator to the digital core turns on and the crystal oscillator starts. The SO pin on the SPI interface must go low before the first positive SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 edge of SCLK (setup time is given in Table 16). If the chip is programmed to enter power-down mode (SPWD strobe issued), the power will be turned off after CSn goes high. The power and crystal oscillator will be turned on again when CSn goes low. The voltage regulator for the digital core requires one external decoupling capacitor. The voltage regulator output should only be used for driving the CC115L. HTTP://WWW.SZRFSTAR.COM CC115L 20 Output Power Programming The RF output power level from the device has two levels of programmability. The PATABLE register can hold two user selected output power settings and the FREND0.PA_POWER value selects the PATABLE entry to use (0 or 1). PATABLE must be programmed in burst mode if writing to other entries than PATABLE[0].See Section 10.6 on page 21 for more programming details. Table 25 contains recommended PATABLE settings for various output levels and frequency bands. DN013 [7] gives the complete tables for the different frequency bands using multi-layer inductors. Using PA settings from 0x61 to 0x6F is not allowed. Table 26 contains output power and current consumption for default PATABLE setting (0xC6). The measurements are done on ([2]). For OOK modulation, FREND0.PA_POWER should be 1 and the logic 0 and logic 1 power levels shall be programmed to index 0 and 1 respectively. For all other modulation formats, the desired output power should be programmed to index 0. Note: All content of the PATABLE except for the first byte (index 0) is lost when entering the SLEEP state. 868 MHz 915 MHz Output Power [dBm] Setting Current Consumption, Typ. [mA] Setting Current Consumption, Typ. [mA] 12/11 0xC0 34.2 0xC0 33.4 10 0xC5 30.0 0xC3 30.7 7 0xCD 25.8 0xCC 25.7 5 0x86 19.9 0x84 20.2 0 0x50 16.8 0x8E 17.2 −6 0x37 16.4 0x38 17.0 −10 0x26 14.5 0x27 14.8 −15 0x1D 13.3 0x1E 13.3 −20 0x17 12.6 0x0E 12.5 −30 0x03 12.0 0x03 11.9 Table 23: Optimum PATABLE Settings for Various Output Power Levels Using Wire-Wound Inductors in 868/915 MHz Frequency Bands 868 MHz 915 MHz Default Power Setting Output Power [dBm] Current Consumption, Typ. [mA] Output Power [dBm] Current Consumption, Typ. [mA] 0xC6 9.6 29.4 8.9 28.7 Table 24: Output Power and Current Consumption for Default PATABLE Setting Using WireWound Inductors in 868/915 MHz Frequency Bands SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 868 MHz 915 MHz Output Power [dBm] Setting Current Consumption, Typ. [mA] Setting Current Consumption, Typ. [mA] 10 0xC2 32.4 0xC0 31.8 7 0xCB 26.8 0xC7 26.9 5 0x81 21.0 0xCD 24.3 0 0x50 16.9 0x8E 16.7 -10 0x27 15.0 0x27 14.9 -15 0x1E 13.4 0x1E 13.4 -20 0x0F 12.7 0x0E 12.6 -30 0x03 12.1 0x03 12.0 Table 25: Optimum PATABLE Settings for Various Output Power Levels Using Multi-layer Inductors in 868/915 MHz Frequency Bands 868 MHz 915 MHz Default Power Setting Output Power [dBm] Current Consumption, Typ. [mA] Output Power [dBm] Current Consumption, Typ. [mA] 0xC6 8.5 29.5 7.2 27.4 Table 26: Output Power and Current Consumption for Default PATABLE Setting Using Multi-layer Inductors in 868/915 MHz Frequency Bands 21 General Purpose / Test Output Control Pins The three digital output pins GDO0, GDO1, and GDO2 are general control pins configured with IOCFG0.GDO0_CFG, IOCFG1.GDO1_CFG, and IOCFG2.GDO2_CFG respectively. Table 27 shows the different signals that can be monitored on the GDO pins. These signals can be used as inputs to the MCU. power-on-reset, this can be used to clock the MCU in systems with only one crystal. When the MCU is up and running, it can change the clock frequency by writing to IOCFG0.GDO0_CFG. If the IOCFGx.GDOx_CFG setting is less than 0x20 and IOCFGx_GDOx_INV is 0 (1), the GDO0 and GDO2 pins will be hardwired to 0 (1), GDO1 is the same pin as the SO pin on the SPI and the GDO1 pin will be hardwired to 1 (0) in interface, thus the output programmed on this pin the SLEEP state. These signals will be will only be valid when CSn is high. The default hardwired until the CHIP_RDYn signal goes low. value for GDO1 is 3-stated which is useful when If the IOCFGx.GDOx_CFG setting is 0x20 or the SPI interface is shared with other devices. higher, the GDO pins will work as programmed The default value for GDO0 is a also in SLEEP state. As an example, GDO1 is 135 - 141 kHz clock output (XOSC frequency high impedance in all states if divided by 192). Since the XOSC is turned on at IOCFG1.GDO1_CFG=0x2E. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L GDOx_CFG[5:0] Description 0 (0x00) - 1 (0x01) Reserved - used for test. 2 (0x02) Associated to the TX FIFO: Asserts when the TX FIFO is filled at or above the TX FIFO threshold. De-asserts when the TX FIFO is below the same threshold. 3 (0x03) Associated to the TX FIFO: Asserts when TX FIFO is full. De-asserts when the TX FIFO is drained below the TX FIFO threshold. 4 (0x04) Reserved - used for test. 5 (0x05) Asserts when the TX FIFO has underflowed. De-asserts when the FIFO is flushed. 6 (0x06) Asserts when sync word has been sent, and de-asserts at the end of the packet. The pin will deassert if the TX FIFO underflows. 7 (0x07) - 9 (0x09) Reserved - used for test. 10 (0x0A) Lock detector output. The PLL is in lock if the lock detector output has a positive transition or is constantly logic high. To check for PLL lock the lock detector output should be used as an interrupt for the MCU. 11 (0x0B) Serial Clock. Synchronous to the data in synchronous serial mode. Data is sampled by CC115L on the rising edge of the serial clock when GDOx_INV=0. 12 (0x0C) Serial Synchronous Data Output. Used for synchronous serial mode. 13 (0x0D) Serial Data Output. Used for asynchronous serial mode. 14 (0x0E) - 26 (0x1A) Reserved - used for test. 27 (0x1B) PA_PD. Note: PA_PD will have the same signal level in SLEEP and TX states. To control an external PA in applications where the SLEEP state is used it is recommended to use GDOx_CFGx=0x2F instead. 28 (0x1C) - 40 (0x28) Reserved - used for test. 41 (0x29) CHIP_RDYn. 42 (0x2A) Reserved - used for test. 43 (0x2B) XOSC_STABLE. 44 (0x2C) - 45 (0x2D) Reserved - used for test. 46 (0x2E) High impedance (3-state). 47 (0x2F) HW to 0 (HW1 achieved by setting GDOx_INV=1). Can be used to control an external PA 48 (0x30) CLK_XOSC/1 49 (0x31) CLK_XOSC/1.5 50 (0x32) CLK_XOSC/2 51 (0x33) CLK_XOSC/3 52 (0x34) CLK_XOSC/4 53 (0x35) CLK_XOSC/6 54 (0x36) CLK_XOSC/8 55 (0x37) CLK_XOSC/12 56 (0x38) CLK_XOSC/16 57 (0x39) CLK_XOSC/24 58 (0x3A) CLK_XOSC/32 59 (0x3B) CLK_XOSC/48 60 (0x3C) CLK_XOSC/64 61 (0x3D) CLK_XOSC/96 62 (0x3E) CLK_XOSC/128 63 (0x3F) CLK_XOSC/192 Note: There are 3 GDO pins, but only one CLK_XOSC/n can be selected as an output at any time. If CLK_XOSC/n is to be monitored on one of the GDO pins, the other two GDO pins must be configured to values less than 0x30. The GDO0 default value is CLK_XOSC/192. To optimize RF performance, these signals should not be used while the radio is in TX mode. Table 27: GDOx Signal Selection (x = 0, 1, or 2) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 22 Asynchronous and Synchronous Serial Operation Several features and modes of operation have been included in the CC115L to provide backward compatibility with previous Chipcon products and other existing RF communication systems. For new systems, it is recommended to use the built-in packet handling features, as they can give more robust communication, significantly offload the microcontroller, and simplify software development. 22.1 Asynchronous Serial Operation Asynchronous transfer is included in the CC115L for backward compatibility with systems that are already using the asynchronous data transfer. When asynchronous transfer is enabled, all packet handling support is disabled and it is not possible to use Manchester encoding. Asynchronous serial mode is enabled by setting PKTCTRL0.PKT_FORMAT to 3. Strobing STX will configure the GDO0 pin as data input (TX data) regardless of the content of the IOCFG0 register. The CC115L modulator samples the level of the asynchronous input 8 times faster than the programmed data rate. The timing requirement for the asynchronous stream is that the error in the bit period must be less than one eighth of the programmed data rate. 22.2 Synchronous Serial Operation Setting PKTCTRL0.PKT_FORMAT to 1 enables synchronous serial mode. When using this mode, sync detection should be disabled together with CRC calculation (MDMCFG2.SYNC_MODE=000 and PKTCTRL0.CRC_EN=0). Infinite packet length mode should be used (PKTCTRL0.LENGTH_CONFIG=10b). In synchronous serial mode, data is transferred on a two-wire serial interface. The CC115L provides a clock that is used to set up new data on the data input line. Data input (TX data) is on the GDO0 pin. This pin will automatically be configured as an input when TX is active. The TX latency is 8 bits. The MCU must handle preamble and sync word insertion in software, together with CRC calculation and insertion. 23 System Considerations and Guidelines 23.1 SRD Regulations International regulations and national laws regulate the use of radio receivers and transmitters. Short Range Devices (SRDs) for license free operation below 1 GHz are usually operated in the 315 MHz, 433 MHz, 868 MHz, or 915 MHz frequency bands. The CC115L is specifically designed for such use with its 300 - 348 MHz, 387 - 464 MHz, and 779 - 928 MHz operating ranges. The most important regulations when using the CC115L in the 315 MHz, 433 MHz, 868 MHz, or 915 MHz frequency bands are EN 300 220 V2.3.1 (Europe) and FCC CFR47 part 15 (USA). SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 For compliance with modulation bandwidth requirements under EN 300 220 V2.3.1 in the 863 to 870 MHz frequency range it is recommended to use a 26 MHz crystal for frequencies below 869 MHz and a 27 MHz crystal for frequencies above 869 MHz. Please note that compliance with regulations is dependent on the complete system performance. It is the customer‟s responsibility to ensure that the system complies with regulations. HTTP://WWW.SZRFSTAR.COM CC115L 23.2 Calibration in Multi-Channel Systems CC115L is highly suited for multi-channel systems due to its agile frequency synthesizer and effective communication interface. Charge pump current, VCO current, and VCO capacitance array calibration data is required for each frequency when implementing a multichannel system. There are 3 ways of obtaining the calibration data from the chip: 1) Calibration for every frequency change. The PLL calibration time is 712/724 µs (26 MHz crystal and TEST0 = 0x09/0B, see Table 21). The blanking interval between each frequency is then 787/799 µs. 2) Perform all necessary calibration at startup and store the resulting FSCAL3, FSCAL2, and FSCAL1 register values in MCU memory. The VCO capacitance calibration FSCAL1 register value must be found for each RF frequency to be used. The VCO current calibration value and the charge pump current calibration value available in FSCAL2 and FSCAL3 respectively are not dependent on the RF frequency, so the same value can therefore be used for all RF frequencies for these two registers. Between each frequency change, the calibration process can then be replaced by writing the FSCAL3, FSCAL2 and FSCAL1 register values that corresponds to the next RF frequency. The PLL turn on time is approximately 75 µs (Table 20). The blanking interval between each frequency hop is then approximately 75 µs. 3) Run calibration on a single frequency at startup. Next write 0 to FSCAL3[5:4] to disable the charge pump calibration. After writing to FSCAL3[5:4], strobe STX with MCSM0.FS_AUTOCAL=1 for each new frequency. That is, VCO current and VCO capacitance calibration is done, but not charge pump current calibration. When charge pump current calibration is disabled the calibration time is reduced from 712/724 µs to 145/157 µs (26 MHz crystal and TEST0 = 0x09/0B, see Table 21). The blanking interval between each frequency hop is then 220/232 µs. There is a trade-off between blanking time and memory space needed for storing calibration data in non-volatile memory. Solution 2) above gives the shortest blanking interval, but requires more memory space to store calibration values. This solution also requires that the supply voltage and temperature do not vary much in order to have a robust solution. Solution 3) gives 567 µs smaller blanking interval than solution 1). The recommended settings for TEST0.VCO_SEL_CAL_EN change with frequency. This means that one should always use SmartRF Studio [4] to get the correct settings for a specific frequency before doing a calibration, regardless of which calibration method is being used. Note: The content in the TEST0 register is not retained in SLEEP state, thus it is necessary to re-write this register when returning from the SLEEP state. 23.3 Wideband Modulation when not Using Spread Spectrum Digital modulation systems under FCC part 15.247 include 2-FSK, GFSK, and 4-FSK modulation. A maximum peak output power of 1 W (+30 dBm) is allowed if the 6 dB bandwidth of the modulated signal exceeds 500 kHz. In addition, the peak power spectral density conducted to the antenna shall not be greater than +8 dBm in any 3 kHz band. Operating at high data rates and frequency separation, the CC115L is suited for systems targeting compliance with digital modulation system as defined by FCC part 15.247. An external power amplifier such as CC1190 [8] is needed to increase the output above +11 dBm. Please refer to DN006 [6] for further details concerning wideband modulation and CC115L. 23.4 Data Burst Transmissions The high maximum data rate of CC115L opens up for burst transmissions. A low average data rate link (e.g. 10 kBaud) can be realized by using a higher over-the-air data rate. Buffering the data and transmitting in bursts at high data rate (e.g. 500 kBaud) will reduce the time in SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 TX mode, and hence also reduce the average current consumption significantly. Reducing the time in TX mode will reduce the likelihood of collisions with other systems in the same frequency range. HTTP://WWW.SZRFSTAR.COM CC115L 23.5 Continuous Transmissions In data streaming applications, the CC115L opens up for continuous transmissions at 500 kBaud effective data rate. As the modulation is done with a closed loop PLL, there is no limitation in the length of a transmission (open loop modulation used in some radios often prevents this kind of continuous data streaming and reduces the effective data rate). 23.6 Increasing Output Power The PA portion of the CC1190 [8] can be used together with CC115L in applications where increased output power is needed. 24 Configuration Registers The configuration of CC115L is done by programming 8-bit registers. The optimum configuration data based on selected system parameters are most easily found by using the SmartRF Studio software [4]. Complete descriptions of the registers are given in the following tables. After chip reset, all the registers have default values as shown in the tables. The optimum register setting might differ from the default value. After a reset, all registers that shall be different from the default value therefore needs to be programmed through the SPI interface. There are 9 command strobe registers listed in Table 28. Accessing these registers will initiate the change of an internal state or mode. There are 34 normal 8-bit configuration registers listed in Table 29, and SmartRF Studio [4] will provide recommended settings for these 2 registers . There are also 5 status registers that are listed in Table 30. These registers, which are readonly, contain information about the status of CC115L. The TX FIFO is accessed through one 8-bit register. During the header byte transfer and while writing data to a register or the TX FIFO, a status byte is returned on the SO line. This status byte is described in Table 17 on page 20. Table 31 summarizes the SPI address space. The address to use is given by adding the base address to the left and the burst and read/write bits on the top. Note that the burst bit has different meaning for base addresses above and below 0x2F. value to them. Addresses marked as “Reserved” must be configured according to SmartRF Studio[4]. 2 Addresses marked as “Not Used” can be part of a burst access and one can write a dummy SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Address Strobe Name Description 0x30 SRES Reset chip. 0x31 SFSTXON Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1). 0x32 SXOFF Turn off crystal oscillator. 0x33 SCAL Calibrate frequency synthesizer and turn it off. SCAL can be strobed from IDLE mode without setting manual calibration mode (MCSM0.FS_AUTOCAL=0) 0x34 Reserved 0x35 STX In IDLE state: Enable TX. Perform calibration first if MCSM0.FS_AUTOCAL=1. 0x36 SIDLE Enter IDLE state 0x37 - 0x38 Reserved 0x39 SPWD 0x3A Reserved 0x3B SFTX 0x3C Reserved 0x3D SNOP Enter power down mode when CSn goes high. Flush the TX FIFO buffer. Only issue SFTX in IDLE or TXFIFO_UNDERFLOW states. No operation. May be used to get access to the chip status byte. Table 28: Command Strobes Address Register Description Preserved in SLEEP State Details on Page Number 0x00 IOCFG2 Yes 42 0x01 IOCFG1 Yes 42 0x02 IOCFG0 GDO2 output pin configuration GDO1 output pin configuration GDO0 output pin configuration Yes 42 0x03 FIFOTHR TX FIFO threshold Yes 43 0x04 SYNC1 Sync word, high byte Yes 43 0x05 SYNC0 Sync word, low byte Yes 43 0x06 PKTLEN Packet length Yes 43 0x07 Not Used Packet automation control Yes 44 Channel number Yes 44 0x08 PKTCTRL0 0x09 Not Used 0x0A CHANNR 0x0B Not Used 0x0C FSCTRL0 Frequency synthesizer control Yes 44 0x0D FREQ2 Frequency control word, high byte Yes 44 0x0E FREQ1 Frequency control word, middle byte Yes 45 0x0F FREQ0 Frequency control word, low byte Yes 45 0x10 MDMCFG4 Modem configuration Yes 45 0x11 MDMCFG3 Modem configuration Yes 45 0x12 MDMCFG2 Modem configuration Yes 46 0x13 MDMCFG1 Modem configuration Yes 46 0x14 MDMCFG0 Modem configuration Yes 47 0x15 DEVIATN Modem deviation setting Yes 47 0x16 Not Used 0x17 MCSM1 Main Radio Control State Machine Configuration Yes 47 0x18 MCSM0 Main Radio Control State Machine configuration Yes 48 0x19 - 0x1F Not Used 0x20 Reserved 0x21 Not Used 0x22 FREND0 Front end TX configuration Yes 49 0x23 FSCAL3 Frequency synthesizer calibration Yes 49 0x24 FSCAL2 Frequency synthesizer calibration Yes 49 48 SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L Address Register Description Preserved in SLEEP State Details on Page Number 0x25 FSCAL1 Frequency synthesizer calibration Yes 49 0x26 FSCAL0 Frequency synthesizer calibration Yes 49 0x27 - 0x28 Not Used 0x29 - 0x2B RESERVED No 50 0x2C TEST2 Various test settings No 50 0x2D TEST1 Various test settings No 50 0x2E TEST0 Various test settings No 50 Table 29: Configuration Registers Overview Address Register Description Details on Page Number 0x30 (0xF0) PARTNUM Part number for CC115L 50 0x31 (0xF1) VERSION Current version number 50 0x32 - 0x34 (0xF2 - 0xF4) Reserved 0x35 (0xF5) MARCSTATE Control state machine state 51 0x36 - 0x37 (0xF6 - 0xF7) Reserved 0x38 (0xF8) PKTSTATUS Current GDOx status and packet status 52 0x39 (0xF9) Reserved 0x3A (0xFA) TXBYTES Underflow and number of bytes in the TX FIFO 52 0x3B - 0x3D (0xFB - 0xFD) Reserved Table 30: Status Registers Overview SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L SRES SFSTXON SXOFF SCAL Reserved STX SIDLE Reserved Reserved SPWD Reserved SFTX Reserved SNOP PATABLE TX FIFO Command Strobes, Status registers (read only) and multi byte registers 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 0x20 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F Read Single Byte Burst +0x80 +0xC0 IOCFG2 IOCFG1 IOCFG0 FIFOTHR SYNC1 SYNC0 PKTLEN Not Used PKTCTRL0 Not Used CHANNR Not Used FSCTRL0 FREQ2 FREQ1 FREQ0 MDMCFG4 MDMCFG3 MDMCFG2 MDMCFG1 MDMCFG0 DEVIATN Not Used MCSM1 MCSM0 Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used FREND0 FSCAL3 FSCAL2 FSCAL1 FSCAL0 Not Used Not Used RESERVED RESERVED RESERVED TEST2 TEST1 TEST0 Not Used SRES PARTNUM SFSTXON VERSION SXOFF Reserved SCAL Reserved Reserved Reserved STX MARCSTATE SIDLE Reserved Reserved Reserved Reserved PKTSTATUS SPWD Reserved Reserved TXBYTES SFTX Reserved Reserved Reserved SNOP Reserved PATABLE PATABLE PATABLE TX FIFO Reserved Reserved R/W configuration registers, burst access possible Write Single Byte Burst +0x00 +0x40 Table 31: SPI Address Space SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 24.1 Configuration Register Details - Registers with preserved values in SLEEP state 0x00: IOCFG2 - GDO2 Output Pin Configuration Bit Field Name Reset 7 R/W Description R0 Not used 6 GDO2_INV 0 R/W Invert output, i.e. select active low (1) / high (0) 5:0 GDO2_CFG[5:0] 41 (101001) R/W Default is CHP_RDYn (See Table 27 on page 35). 0x01: IOCFG1 - GDO1 Output Pin Configuration Bit Field Name Reset R/W Description 7 GDO_DS 0 R/W Set high (1) or low (0) output drive strength on the GDO pins. 6 GDO1_INV 0 R/W Invert output, i.e. select active low (1) / high (0) 5:0 GDO1_CFG[5:0] 46 (101110) R/W Default is 3-state (See Table 27 on page 35). 0x02: IOCFG0 - GDO0 Output Pin Configuration Bit Field Name 7 Reset R/W Description 0 R/W Use setting from SmartRF Studio [4] 6 GDO0_INV 0 R/W Invert output, i.e. select active low (1) / high (0) 5:0 GDO0_CFG[5:0] 63 (111111) R/W Default is CLK_XOSC/192 (See Table 27 on page 35). It is recommended to disable the clock output in initialization, in order to optimize RF performance. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x03: FIFOTHR - TX FIFO Thresholds Bit Field Name 7:4 3:0 FIFO_THR[3:0] Reset R/W Description 0 (00) R/W Use setting from SmartRF Studio [4] 7 (0111) R/W Set the threshold for the TX FIFO. The threshold is exceeded when the number of bytes in the TX FIFO is equal to or higher than the threshold value. Setting Bytes in TX FIFO 0 (0000) 61 1 (0001) 57 2 (0010) 53 3 (0011) 49 4 (0100) 45 5 (0101) 41 6 (0110) 37 7 (0111) 33 8 (1000) 29 9 (1001) 25 10 (1010) 21 11 (1011) 17 12 (1100) 13 13 (1101) 9 14 (1110) 5 15 (1111) 1 0x04: SYNC1 - Sync Word, High Byte Bit Field Name Reset R/W Description 7:0 SYNC[15:8] 211 (0xD3) R/W 8 MSB of 16-bit sync word 0x05: SYNC0 - Sync Word, Low Byte Bit Field Name Reset R/W Description 7:0 SYNC[7:0] 145 (0x91) R/W 8 LSB of 16-bit sync word 0x06: PKTLEN - Packet Length Bit Field Name Reset R/W Description 7:0 PACKET_LENGTH 255 (0xFF) R/W Indicates the packet length when fixed packet length mode is enabled. This value must be different from 0 SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x08: PKTCTRL0 - Packet Automation Control Bit Field Name Reset 7 6 5:4 PKT_FORMAT[1:0] 3 2 CRC_EN R/W Description R0 Not used 1 R/W Use setting from SmartRF Studio [4] 0 (00) R/W Format of TX data Setting Packet format 0 (00) Normal mode, use TX FIFO 1 (01) Synchronous serial mode, Data in on GDO0 2 (10) Random TX mode; sends random data using PN9 generator. Used for test. 3 (11) Asynchronous serial mode, Data in on GDO0 0 R0 Not used 1 R/W 1: CRC calculation enabled 0: CRC calculation disabled 1:0 LENGTH_CONFIG[1:0] 1 (01) R/W Configure the packet length Setting Packet length configuration 0 (00) Fixed packet length mode. Length configured in PKTLEN register 1 (01) Variable packet length mode. Packet length configured by the first byte written to the TX FIFO 2 (10) Infinite packet length mode 3 (11) Reserved 0x0A: CHANNR - Channel Number Bit Field Name Reset R/W Description 7:0 CHAN[7:0] 0 (0x00) R/W The 8-bit unsigned channel number, which is multiplied by the channel spacing setting and added to the base frequency. 0x0C: FSCTRL0 - Frequency Synthesizer Control Bit Field Name Reset R/W Description 7:0 FREQOFF[7:0] 0 (0x00) R/W Frequency offset added to the base frequency before being used by the frequency synthesizer. (2s-complement). Resolution is FXTAL/214 (1.59kHz-1.65kHz); range is ±202 kHz to ±210 kHz, dependent of XTAL frequency. 0x0D: FREQ2 - Frequency Control Word, High Byte Bit Field Name Reset R/W Description 7:6 FREQ[23:22] 0 (00) R FREQ[23:22] is always 0 (the FREQ2 register is less than 36 with 26 - 27 MHz crystal) 5:0 FREQ[21:16] 30 (011110) R/W FREQ[23:0] is the base frequency for the frequency synthesiser in increments of fXOSC/216. f carrier SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 f XOSC FREQ[23 : 0] 216 HTTP://WWW.SZRFSTAR.COM CC115L 0x0E: FREQ1 - Frequency Control Word, Middle Byte Bit Field Name Reset R/W Description 7:0 FREQ[15:8] 196 (0xC4) R/W Ref. FREQ2 register 0x0F: FREQ0 - Frequency Control Word, Low Byte Bit Field Name Reset R/W Description 7:0 FREQ[7:0] 236 (0xEC) R/W Ref. FREQ2 register 0x10: MDMCFG4 - Modem Configuration Bit Field Name 7:4 3:0 DRATE_E[3:0] Reset R/W Description 8 (1000) R/W Use setting from SmartRF Studio [4] 12 (1100) R/W The exponent of the user specified symbol rate 0x11: MDMCFG3 - Modem Configuration Bit Field Name Reset R/W Description 7:0 DRATE_M[7:0] 34 (0x22) R/W The mantissa of the user specified symbol rate. The symbol rate is configured using an unsigned, floating-point number with 9-bit mantissa and 4-bit exponent. The 9th bit is a hidden „1‟. The resulting data rate is: RDATA (256 DRATE _ M ) 2 DRATE _ E 2 28 f XOSC The default values give a data rate of 115.051 kBaud (closest setting to 115.2 kBaud), assuming a 26.0 MHz crystal. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x12: MDMCFG2 - Modem Configuration Bit Field Name 7 6:4 MOD_FORMAT[2:0] Reset R/W Description 0 R/W Use setting from SmartRF Studio [4] 0 (000) R/W The modulation format of the radio signal Setting Modulation format 0 (000) 2-FSK 1 (001) GFSK 2 (010) Reserved 3 (011) OOK 4 (100) 4-FSK 5 (101) Reserved 6 (110) Reserved 7 (111) Reserved 4-FSK modulation cannot be used together with Manchester encoding. 3 MANCHESTER_EN 0 R/W Enables Manchester encoding. 0 = Disable 1 = Enable Manchester encoding cannot be used when using asynchronous serial mode or 4-FSK modulation 2:0 SYNC_MODE[2:0] 2 (010) R/W Number of sync bits transmitted Setting Sync-word qualifier mode 0 (000) No preamble/sync 1 (001) 16 bits sync word 2 (010) Reserved 3 (011) 32 bits sync word 4 (100) - 7 (111) Reserved 0x13: MDMCFG1 - Modem Configuration Bit Field Name 7 6:4 NUM_PREAMBLE[2:0] Reset R/W Description 0 R/W Use setting from SmartRF Studio [4] 2 (010) R/W Sets the minimum number of preamble bytes to be transmitted 3:2 1:0 CHANSPC_E[1:0] 2 (10) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD Setting Number of preamble bytes 0 (000) 2 1 (001) 3 2 (010) 4 3 (011) 6 4 (100) 8 5 (101) 12 6 (110) 16 7 (111) 24 R0 Not used R/W 2 bit exponent of channel spacing TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x14: MDMCFG0 - Modem Configuration Bit Field Name Reset R/W Description 7:0 CHANSPC_M[7:0] 248 (0xF8) R/W 8-bit mantissa of channel spacing. The channel spacing is multiplied by the channel number CHAN and added to the base frequency. It is unsigned and has the format: f CHANNEL f XOSC (256 CHANSPC _ M ) 2CHANSPC _ E 218 The default values give 199.951 kHz channel spacing (the closest setting to 200 kHz), assuming 26.0 MHz crystal frequency. 0x15: DEVIATN - Modem Deviation Setting Bit Field Name Reset 7 6:4 DEVIATION_E[2:0] 4 (100) 3 2:0 DEVIATION_M[2:0] 7 (111) R/W Description R0 Not used. R/W Deviation exponent. R0 Not used. R/W 2-FSK/ GFSK/ 4-FSK Specifies the nominal frequency deviation from the carrier for a „0‟ (-DEVIATN) and „1‟ (+DEVIATN) in a mantissaexponent format, interpreted as a 4-bit value with MSB implicit 1. The resulting frequency deviation is given by: f dev f xosc (8 DEVIATION _ M ) 2 DEVIATION _ E 217 The default values give ±47.607 kHz deviation assuming 26.0 MHz crystal frequency. OOK This setting has no effect 0x17: MCSM1 - Main Radio Control State Machine Configuration Bit Field Name Reset R/W Description R0 Not used 3 (1100) R/W Use setting from SmartRF Studio [4] 0 (00) R/W Select what should happen when a packet has been sent 7:6 5:2 1:0 TXOFF_MODE[1:0] SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 Setting Next state after finishing packet transmission 0 (00) IDLE 1 (01) FSTXON 2 (10) Stay in TX (start sending preamble) 3 (11) Reserved HTTP://WWW.SZRFSTAR.COM CC115L 0x18: MCSM0 - Main Radio Control State Machine Configuration Bit Field Name Reset FS_AUTOCAL[1:0] 0 (00) 7:6 5:4 3:2 PO_TIMEOUT 1 (01) R/W Description R0 Not used R/W Automatically calibrate when going to to/from TX mode R/W Setting When to perform automatic calibration 0 (00) Never (manually calibrate using SCAL strobe) 1 (01) When going from IDLE to TX or FSTXON 2 (10) When going from TX back to IDLE automatically 3 (11) Every 4th time when going from TX to IDLE automatically Programs the number of times the six-bit ripple counter must expire after the XOSC has settled before CHP_RDYn goes low. 3 If XOSC is on (stable) during power-down, PO_TIMEOUT shall be set so that the regulated digital supply voltage has time to stabilize before CHP_RDYn goes low (PO_TIMEOUT=2 recommended). Typical start-up time for the voltage regulator is 50 μs. For robust operation it is recommended to use PO_TIMEOUT = 2 or 3 when XOSC is off during powerdown. Setting Expire count Timeout after XOSC start 0 (00) 1 Approx. 2.3 - 2.4 μs 1 (01) 16 Approx. 37 - 39 μs 2 (10) 64 Approx. 149 - 155 μs 3 (11) 256 Approx. 597 - 620 μs Exact timeout depends on crystal frequency. 1 0 XOSC_FORCE_ON 0 R/W 0 R/W Force the XOSC to stay on in the SLEEP state. 0x20: RESERVED Bit 7:3 Field Name Reset R/W Description 31 (11111) R/W Use setting from SmartRF Studio [4] R0 Not used R/W See SmartRF Studio [4] for setting 2 1:0 0 (00) 3 Note that the XOSC_STABLE signal will be asserted at the same time as the CHIP_RDYn signal; i.e. the PO_TIMEOUT delays both signals and does not insert a delay between the signals. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x22: FREND0 - Front End TX Configuration Bit Field Name Reset 7:6 5:4 LODIV_BUF_CURRENT_TX[1:0] 1 (01) 3 2:0 PA_POWER[2:0] 0 (000) R/W Description R0 Not used R/W Adjusts current TX LO buffer (input to PA). The value to use in this field is given by the SmartRF Studio software [4]. R0 Not used R/W Selects PA power setting. This value is an index to the PATABLE, which can be programmed with up to 2 different PA settings. When using OOK, PA_POWER should be 001, and for all other modulation formats it should be 000. Please see Sections 10.6 and Section 20 for more details. 0x23: FSCAL3 - Frequency Synthesizer Calibration Bit Field Name Reset R/W Description 7:6 FSCAL3[7:6] 2 (10) R/W Frequency synthesizer calibration configuration. The value to write in this field before calibration is given by the SmartRF Studio software [4]. 5:4 CHP_CURR_CAL_EN[1:0] 2 (10) R/W Disable charge pump calibration stage when 0. 3:0 FSCAL3[3:0] 9 (1001) R/W Frequency synthesizer calibration result register. Digital bit vector defining the charge pump output current, on an exponential scale: I_OUT = I0·2FSCAL3[3:0]/4 Please see Section 23.2 for more details. 0x24: FSCAL2 - Frequency Synthesizer Calibration Bit Field Name Reset 7:6 R/W Description R0 Not used 5 VCO_CORE_H_EN 0 R/W Choose high (1) / low (0) VCO 4:0 FSCAL2[4:0] 10 (01010) R/W Frequency synthesizer calibration result register. VCO current calibration result and override value. Please see Section 23.2 for more details. 0x25: FSCAL1 - Frequency Synthesizer Calibration Bit Field Name Reset 7:6 5:0 FSCAL1[5:0] 32 (0x20) R/W Description R0 Not used R/W Frequency synthesizer calibration result register. Capacitor array setting for VCO coarse tuning. Please see Section 23.2 for more details. 0x26: FSCAL0 - Frequency Synthesizer Calibration Bit Field Name Reset 7 6:0 FSCAL0[6:0] 13 (0x0D) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 R/W Description R0 Not used R/W Frequency synthesizer calibration control. The value to use in this register is given by the SmartRF Studio software [4]. HTTP://WWW.SZRFSTAR.COM CC115L 24.2 Configuration Register Details - Registers that Loose Programming in SLEEP State 0x29: RESERVED Bit Field Name 7:0 Reset R/W Description 89 (0x59) R/W Use setting from SmartRF Studio [4] 0x2A: RESERVED Bit Field Name 7:0 Reset R/W Description 127 (0x7F) R/W Use setting from SmartRF Studio [4] 0x2B: RESERVED Bit Field Name 7:0 Reset R/W Description 63 (0x3F) R/W Use setting from SmartRF Studio [4] 0x2C: TEST2 - Various Test Settings Bit Field Name Reset R/W Description 7:0 TEST2[7:0] 136 (0x88) R/W Use setting from SmartRF Studio [4] 0x2D: TEST1 - Various Test Settings Bit Field Name Reset R/W Description 7:0 TEST1[7:0] 49 (0x31) R/W Use setting from SmartRF Studio [4] 0x2E: TEST0 - Various Test Settings Bit Field Name Reset R/W Description 7:2 TEST0[7:2] 2 (000010) R/W Use setting from SmartRF Studio [4] 1 VCO_SEL_CAL_EN 1 R/W Enable VCO selection calibration stage when 1 0 TEST0[0] 1 R/W Use setting from SmartRF Studio [4] 24.3 Status Register Details 0x30 (0xF0): PARTNUM - Chip ID Bit Field Name Reset R/W Description 7:0 PARTNUM[7:0] 0 (0x00) R Chip part number 0x31 (0xF1): VERSION - Chip ID Bit Field Name Reset R/W Description 7:0 VERSION[7:0] 9 (0x09) R Chip version number. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x35 (0xF5): MARCSTATE - Main Radio Control State Machine State Bit Field Name 7:5 4:0 MARC_STATE[4:0] Reset R/W Description R0 Not used R Main Radio Control FSM State Value State name State (Figure 13, page 27) 0 (0x00) SLEEP SLEEP 1 (0x01) IDLE IDLE 2 (0x02) XOFF XOFF 3 (0x03) VCOON_MC MANCAL 4 (0x04) REGON_MC MANCAL 5 (0x05) MANCAL MANCAL 6 (0x06) VCOON FS_WAKEUP 7 (0x07) REGON FS_WAKEUP 8 (0x08) STARTCAL CALIBRATE 9 (0x09) BWBOOST SETTLING 10 (0x0A) FS_LOCK SETTLING 11 (0x0B) Reserved 12 (0x0C) ENDCAL 13 (0x0D) 17 (0x11) Reserved 18 (0x12) FSTXON FSTXON 19 (0x13) TX TX 20 (0x14) TX_END TX 21 (0x15) Reserved 22 (0x16) TXFIFO_UNDERFLOW CALIBRATE TXFIFO_UNDERFLOW Note: it is not possible to read back the SLEEP or XOFF state numbers because setting CSn low will make the chip enter the IDLE mode from the SLEEP or XOFF states. SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 0x38 (0xF8): PKTSTATUS - Current GDOx Status and Packet Status Bit Field Name Reset 7:3 2 GDO2 R/W Description R Reserved R Current GDO2 value. Note: the reading gives the non-inverted value irrespective of what IOCFG2.GDO2_INV is programmed to. It is not recommended to check for PLL lock by reading PKTSTATUS[2] with GDO2_CFG=0x0A. 1 0 GDO0 R0 Not used R Current GDO0 value. Note: the reading gives the non-inverted value irrespective of what IOCFG0.GDO0_INV is programmed to. It is not recommended to check for PLL lock by reading PKTSTATUS[0] with GDO0_CFG=0x0A. 0x3A (0xFA): TXBYTES - Underflow and Number of Bytes Bit Field Name Reset R/W 7 TXFIFO_UNDERFLOW R 6:0 NUM_TXBYTES R Description Number of bytes in TX FIFO 25 Development Kit Ordering Information Orderable Evaluation Module Description Minimum Order Quantity CC11xLDK-868-915 CC11xL Development Kit, 868/915 MHz 1 CC11xLEMK-433 CC11xL Evaluation Module Kit, 433 MHz 1 Figure 18: Development Kit Ordering Information SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 26 [1] References Characterization Design 315 - 433 MHz (Identical to the CC1101EM 315 - 433 MHz Reference Design (swrr046.zip)) [2] Characterization Design 868 - 915 MHz (Identical to the CC1101EM 868 - 915 MHz Reference Design (swrr045.zip)) [3] CC115L Errata Notes (swrz036.pdf) [4] SmartRF Studio (swrc176.zip) [5] DN017 CC11xx 868/915 MHz RF Matching (swra168.pdf) [6] DN006 CC11xx Settings for FCC 15.247 Solutions (swra123.pdf) [7] DN013 Programming Output Power on CC1101 (swra168.pdf) [8] CC1190 Data Sheet (swrs08.pdf) [9] DN032 Options for Cost Optimizes CC11xx Matching (swra346.pdf) [10] CC110LEM / CC115LEM 433 MHz Reference Design (swrr081.zip) [11] CC110LEM / CC115LEM 868 - 915 MHz Reference Design (swrr082.zip) SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM CC115L 27 General Information 27.1 Document History Revision Date Description/Changes SWRA105 05.24.2011 Initial Release SWRS105A 08.09.2011 Added two registers (CHANNR and MDMCFG0) in addition to the MDMCFG1.CHANSPC_E register field. Changes made to Section 17. Hyperlinks added to the CC110LEM / CC115LEM 433 MHz Reference Design and the CC110LEM / CC115LEM 868 - 915 MHz Reference Design Table 32: Document History SHENZHEN RF-STAR TECHNOLOGY CO.,LTD TEL:0755-86329829 FAX:0755-86329413 HTTP://WWW.SZRFSTAR.COM PACKAGE OPTION ADDENDUM www.ti.com 8-Sep-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) CC115LRTKR ACTIVE VQFN RTK 20 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR CC115LRTKT ACTIVE VQFN RTK 20 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 7-Sep-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant CC115LRTKR VQFN RTK 20 3000 330.0 12.4 4.3 4.3 1.5 8.0 12.0 Q2 CC115LRTKT VQFN RTK 20 250 330.0 12.4 4.3 4.3 1.5 8.0 12.0 Q2 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 7-Sep-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CC115LRTKR VQFN RTK 20 3000 340.5 333.0 20.6 CC115LRTKT VQFN RTK 20 250 340.5 333.0 20.6 Pack Materials-Page 2 CC115L 重要声明 德州仪器(TI) 及其下属子公司有权在不事先通知的情况下, 随时对所提供的产品和服务进行更正、修改、增强、改进或其它更改， 并有权随时中止提供任何产品和服务。客户在下订单前应获取最新的相关信息 , 并验证这些信息是否完整且是最新的。所有产品的 销售都遵循在订单确认时所提供的TI 销售条款与条件。 TI 保证其所销售的硬件产品的性能符合TI 标准保修的适用规范。仅在TI 保证的范围内 , 且TI 认为有必要时才会使用测试或其它质 量控制技术。除非政府做出了硬性规定 , 否则没有必要对每种产品的所有参数进行测试。 TI 对应用帮助或客户产品设计不承担任何义务。客户应对其使用TI 组件的产品和应用自行负责。为尽量减小与客户产品和应用相关 的风险，客户应提供充分的设计与操作安全措施。 TI 不对任何TI 专利权、版权、屏蔽作品权或其它与使用了TI 产品或服务的组合设备、机器、流程相关的TI 知识产权中授予的直接 或隐含权限作出任何保证或解释。TI 所发布的与第三方产品或服务有关的信息，不能构成从TI 获得使用这些产品或服务的许可、授 权、或认可。使用此类信息可能需要获得第三方的专利权或其它知识产权方面的许可，或是TI 的专利权或其它知识产权方面的许可。 对于TI 的产品手册或数据表，仅在没有对内容进行任何篡改且带有相关授权、条件、限制和声明的情况下才允许进行复制。在复制 信息的过程中对内容的篡改属于非法的、欺诈性商业行为。TI 对此类篡改过的文件不承担任何责任。 在转售TI 产品或服务时，如果存在对产品或服务参数的虚假陈述，则会失去相关TI 产品或服务的明示或暗示授权，且这是非法的、 欺诈性商业行为。TI 对此类虚假陈述不承担任何责任。 TI 产品未获得用于关键的安全应用中的授权，例如生命支持应用（在该类应用中一旦TI 产品故障将预计造成重大的人员伤亡），除 非各方官员已经达成了专门管控此类使用的协议。购买者的购买行为即表示，他们具备有关其应用安全以及规章衍生所需的所有专业 技术和知识，并且认可和同意，尽管任何应用相关信息或支持仍可能由TI 提供，但他们将独力负责满足在关键安全应用中使用其产 品及TI 产品所需的所有法律、法规和安全相关要求。此外，购买者必须全额赔偿因在此类关键安全应用中使用TI 产品而对TI 及其 代表造成的损失。 TI 产品并非设计或专门用于军事/航空应用，以及环境方面的产品，除非TI 特别注明该产品属于“军用”或“增强型塑料”产品。只 有TI 指定的军用产品才满足军用规格。购买者认可并同意，对TI 未指定军用的产品进行军事方面的应用，风险由购买者单独承担， 并且独力负责在此类相关使用中满足所有法律和法规要求。 TI 产品并非设计或专门用于汽车应用以及环境方面的产品，除非TI 特别注明该产品符合ISO/TS 16949 要求。购买者认可并同意， 如果他们在汽车应用中使用任何未被指定的产品，TI 对未能满足应用所需要求不承担任何责任。 可访问以下URL 地址以获取有关其它TI 产品和应用解决方案的信息： 产品 应用 数字音频 www.ti.com.cn/audio 通信与电信 www.ti.com.cn/telecom 放大器和线性器件 http://www.ti.com.cn/amplifiers 计算机及周边 www.ti.com.cn/computer 数据转换器 http://www.ti.com.cn/dataconvert ers 消费电子 www.ti.com/consumer-apps DLP® 产品 www.dlp.com 能源 www.ti.com/energy DSP - 数字信号处理器 http://www.ti.com.cn/dsp 工业应用 www.ti.com.cn/industrial 时钟和计时器 http://www.ti.com.cn/clockandtim ers 医疗电子 www.ti.com.cn/medical 接口 http://www.ti.com.cn/interface 安防应用 www.ti.com.cn/security 逻辑 http://www.ti.com.cn/logic 汽车电子 www.ti.com.cn/automotive 电源管理 http:///www.ti.com.cn/power 视频和影像 www.ti.com.cn/video 微控制器 (MCU) http://www.ti.com.cn/microcontroll 无线通信 ers RFID 系统 http://www.ti.com.cn/rfidsys RF/IF 和 ZigBee® 解决方案 www.ti.com.cn/radiofre TI E2E 工程师社区 Shenzhen RF-star Technology Co.,Ltd. TEL:0755-86329829 TEL:0755-86329413 http://e2e.ti.com/cn/ www.ti.com.cn/wireless IMPORTANT NOTICE Http;//www.szrfstar.com