GSIB2560-E THRU GSIB25100-E SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 600V to 1000V Current: 25.0A Features GSIB-5S Glass passivated chip junction Ideal for printed circuit board High surge current capability High case dielectric strength This series is UL listed under Recognized Component Index, file number E185029 Halogen Free Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Halogen Free Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol GSIB2560-E GSIB2580-E GSIB25100-E units Maximum repetitive peak reverse voltage Vrrm 600 800 1000 V Maximum RMS voltage Vrms 420 560 700 V Maximum DC blocking voltage Vdc 600 800 1000 V If(av) 25.0 3.5 A Ifsm 350 A Vf 1.0 V I2t 500 A2Sec Ir 10.0 350 µA (Note2) (Note1) Rth(ja) Rth(jc) 22.0 1.0 ℃/W Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Maximum average forward Tc = 98℃(Note 1) Rectified output current at Ta = 25℃(Note 2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 12.5A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25°C Ta = 125°C Note: 1. Unit case mounted onAl plate heatsink 2. Unit case mounted on P.C.B. with heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GSIB2560-E THRU GSIB25100-E Rev.A1 www.gulfsemi.com