UESP06J Ultra fast Plastic Power Rectifiers VOLTAGE: 600V CURRENT:6.0A FEATURE ITO-220AC • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: 10 in-lbs maximum Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Maximum Maximum Maximum Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Storage and Operating Temperature Range SYMBOL UESP06J units Vrrm Vrms Vdc 600 420 600 V V V If(av) 6.0 A Ifsm 90 A Vf 1.6 V Trr 35 3.0 10 100 nS Rth(jc) Ir Tstg, Tj -55 to +150 ℃/W µA ℃ Note: Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UESP06J Rev.A1 www.gulfsemi.com