FERP10F Ultrafast Plastic Power Rectifiers VOLTAGE: 300V CURRENT: 10.0A FEATURE ITO-220AB Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching MECHANICAL DATA Case: JEDEC ITO-220AB molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Maximum Maximum Maximum Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current 5A and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical thermal resistance junction to case Storage and Operating Temperature Range SYMBOL FERP10F units Vrrm Vrms Vdc 300 210 300 V V V If(av) 10 A Ifsm 150 A Vf 1.3 V Trr 50 5.0 500.0 5.0 -55 to +150 nS Ir Rth(jc) Tstg, Tj µA °C/W °C Note: Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FERP10F Rev.A1 www.gulfsemi.com