FE30JPT Ultra fast Plastic Power Rectifiers VOLTAGE: 600V CURRENT:30.0A FEATURE TO-3P/TO-247AD • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Glass passivated chip junctions • Superfast recovery times for high efficiency • Low forward voltage,high current capability • Low thermal resistance •Low power loss • High temperature soldering guaranteed MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body over passivated chip Terminals: Plated leads solderable perMIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FE30JPT units Maximum Recurrent Peak Reverse Voltage Vrrm 600 V Maximum RMS Voltage Vrms 420 V Vdc 600 V If(av) 30.0 A Ifsm 300 A Vf 1.30 V Trr 50 nS Rth(jc) 1.0 °C/W Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C at 15A Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Storage and Operating Temperature Range Ir Tstg, Tj 10 100 -55 to +150 µA °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FE30JPT 1 Rev.A1 www.gulfsemi.com