ʳ ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE Features 1206RGBCT-CA RED GREEN BLUE Description ŏ3.2mmx1.5mm SMT LED, 0.68mm THICKNESS. ŏLOW POWER CONSUMPTION. The Red source color devices are made with DH InGaAIP on GaAs substrate Light Emitting Diode. ŏONE RED, ONE GREEN AND ONE BLUE CHIPS IN The Green source color devices are made with GaP on Sap- ONE PACKAGE. ŏC-AN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. phire Light Emitting Diode. The Blue source color devices are made with GaN on Sapphire Light Emitting Diode. ŏPACKAGE : 3000PCS / REEL. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electriC-Ally grounded. Package Dimensions Notes: 1ˁʳAll dimension units are millimeters. 2.All dimension tolerance is ±0.2mm unless otherwise noted. 3.An epoxy meniscus may extend about 1.5mm down the leads. 4.Burr around bottom of epoxy may be 0.5mm max.. SPEC NO: A1329 APPROVED: ʳʳʳʳʳʳʳʳREV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 1 OF 4 ʳ Selection Guide Iv (mcd) Part No. 1206RGBCT-CA Lens Type Dice RED (InGaAIP) @ 20mA Dice GREEN (GaP) ʳ Dice BLUE (GaN) ʳ Code Min. Max. Code Min. Max. Code Min. Max. Jʳ ʳ 90ʳ 125ʳ Mʳ 210ʳ 276ʳ Hʳ 55ʳ 70ʳ Kʳ 125ʳ 160ʳ Nʳ 276ʳ 355ʳ Iʳ 70ʳ 90ʳ Lʳ 160ʳ 210ʳ Oʳ 355 460 Jʳ ʳ 90ʳ 125ʳ WATER CLEAR Viewing Angle ʳ ʳ 2T1/2 120° Note: 1. T1/2 is the angle from optiC-Al centerline where the luminous intensity is 1/2 the optiC-Al centerline value. ElectriC-Al / OptiC-Al Characteristics at TA=25°Cʳ Device Symbol OD Dominate Wavelength C C-Apacitance VF IR Red Device Green ʳ Blue ʳ Device Parameter Code Typ. Max. Code Typ. Max. Code Typ. Max. A 621 624 F 515 518 D 464 467 B 624 627 G 518 521 E 467 470 C 627 630 H 521 524 F 470 473 15 45 110 A 1.6 1.8 H 3.0 3.2 H 3.0 3.2 B 1.8 2.0 I 3.2 3.4 I 3.2 3.4 C 2.0 2.2 J 3.4 3.6 J 3.4 3.6 K 3.6 3.8 K 3.6 3.8 Forward Voltage Reverse Current 10 10 10 Units Test Conditions nm IF=20mA pF VF=0V;f=1MHz V IF=20mA uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Red Green Blue Units Power dissipation 75 95 114 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 160 150 160 mA Reverse Voltage 5 V -40°C TO +80°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: A1329 APPROVED: ʳʳʳʳʳʳʳʳREV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 2 OF 4 ʳ RED 1206RGBCT-CA GREEN BLUEʳʳʳʳʳʳʳʳʳʳʳʳʳ Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level :90% LTPD :10% ʳ No. Items Test Hours/Cycles Sample Size Ac/Rc 1 Reflow 6 Min. 22Pcs. 0/1 2 Temperature Cycle H:+100ć 15 min. ī 5 min L:-40ć 15 min. 300 Cycles 22Pcs. 0/1 3 Thermal Shock H:+100ć 5 min. ī 10 sec. L:-10ć 5 min. 300 Cycles 22Pcs. 0/1 4 High Temperature Storage Temp.:100ć 1000Hrs. 22Pcs. 0/1 5 Low Temperature Storage Temp.:-55ć 1000Hrs. 22Pcs. 0/1 6 DC Operating Life IF=20mA 1000Hrs. 22Pcs. 0/1 7 High Temperature/High Humidity 85ć/R.H85% 1000Hrs. 22Pcs. 0/1 SPEC NO: A1329 APPROVED: Test Condition Temp:240ć±5ć ʳʳʳʳʳʳʳʳREV NO: V1 CHECKED: Min.5 sec. DATE: MAY/05/2006 DRAWN: PAGE: 3 OF 4 ʳ 1206RGBCT-CA Recommended Soldering Pattern (Units : mm) Tape SpecifiC-Ations (Units : mm) SPEC NO: A1329 APPROVED: ʳʳʳʳʳʳʳʳREV NO: V1 CHECKED: DATE: MAY/05/2006 DRAWN: PAGE: 4 OF 4