KINGBRIGHT APBDA3020PBACGKC

3.0x2.0mm RIGHT ANGLE SMD LED
Part Number: APBDA3020PBACGKC
PRELIMINARY SPEC
ATTENTION
Blue
Green
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 3.0mmx2.0mm SMT LED,2.8mm THICKNESS.
The Blue source color devices are made with InGaN
z LOW POWER CONSUMPTION.
on SiC Light Emitting Diode.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
The Green source color devices are made with InGaAlP on
z IDEAL FOR BACK LIGHT AND INDICATOR
GaAs substrate Light Emitting Diode.
z PACKAGE : 2000PCS / REEL.
Static electricity and surge damage the LEDS.
z WHEN SOLDERED IN THE SIDEVIEW CONFIGURA-
It is recommended to use a wrist band or anti-electrostatic
TION, THE MAXIMUM SHEAR TOLERANCE OF THE
glove when handling the LEDs.
EPOXY LENS IS 300G.
All devices, equipment and machinery must be electrically
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
grounded.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 1 OF 6
ERP: 1203006470
Selection Guide
Part No.
Dice
Lens Type
Blue (InGaN)
APBDA3020PBACGKC
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
110
220
180
320
2θ1/2
15°
WATER CLEAR
Green (InGaAlP)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Blue
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
468
574
nm
IF=20mA
Blue
Green
470
570
nm
IF=20mA
Spectral Line Half-width
Blue
Green
21
20
nm
IF=20mA
C
Capacitance
Blue
Green
100
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
Green
3.2
2.1
4
2.5
V
IF=20mA
IR
Reverse Current
Blue
Green
10
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Green
Units
Power dissipation
120
75
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
100
150
mA
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
V
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 2 OF 6
ERP: 1203006470
APBDA3020PBACGKC
Blue
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 3 OF 6
ERP: 1203006470
Green
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 4 OF 6
ERP: 1203006470
APBDA3020PBACGKC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 5 OF 6
ERP: 1203006470
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAG9428
REV NO: V.7
APPROVED: WYNEC
CHECKED: Allen Liu
APBDA3020PBACGKC
DATE: MAY/18/2007
DRAWN: Y.L.LI
PAGE: 6 OF 6
ERP: 1203006470