3.0mmx3.0mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APKF3030SUVGABEC-F01 HYPER RED GREEN BLUE Features Description ●LOW POWER CONSUMPTION. The Hyper Red source color devices are made ●3.0mmx3.0mm SMT LED, 2.0mm(MAX.) THICKNESS. with DH InGaAlP on GaAs substrate Light Emitting ●ONE RED, ONE GREEN AND ONE BLUE CHIPS IN Diode. The Green source color devices are made with InGaN on ONE PACKAGE. ●CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. G-SiC Light Emitting Diode. The Blue source color devices are made with InGaN on SiC ●PACKAGE : 1000PCS / REEL. Light Emitting Diode. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. Static electricity and surge damage the LEDS. ●RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAlP) APKF3030SUVGABEC-F01 WATER CLEAR GREEN (InGaN) BLUE (InGaN) Viewing Angle [1] Min. Typ. 110 220 110 250 50 120 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 640 520 465 nm IF=20mA Hyper Red Green Blue 628 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 27 35 25 nm IF=20mA C Capacitance Hyper Red Green Blue 45 100 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.9 3.2 3.7 2.5 4.0 4.3 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 120 129 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 100 160 mA Reverse Voltage 5 V -40°C To +85°C Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 APKF3030SUVGABEC-F01 Hyper Red SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 Green SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 Blue SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 APKF3030SUVGABEC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834 PACKING & LABEL SPECIFICATIONS APKF3030SUVGABEC-F01 SPEC NO: DSAG5763 REV NO: V.2 DATE: JUN/24/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000834