THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW X815 100.00M 0426 5.0V 7.5x5mm FIXED FREQUENCY OSCILLATOR CWX815 ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage TABLE 1.0 UNITS MINIMUM -55 NOMINAL - MAXIMUM 125 UNITS °C (Vcc) -0.5 - 7.0 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER Frequency Range (Fo) Additional Frequencies Available Frequency Tolerance Operating Temperature Range MINIMUM 1.00 NOMINAL - MAXIMUM 100.00 UNITS MHz 106.25, 125.00, 155.52 and 156.25 -25 25 -20 70 MHz ppm °C Supply Voltage (Vdd) 4.5 5.0 5.5 Vdc Supply Current (Icc) - - 45 mA Enable Voltage (Vih) > 2.2 - - Vdc Disable Voltage (Vil) - - < 0.8 Vdc INPUT CHARACTERISTICS DESCRIPTION NOTE NOTE 1 The Connor-Winfield CWX815 is a 5.0V, HCMOS, 7.5x5mm, Surface Mount, Fixed Frequency Crystal Oscillator (XO) designed for use in applications requiring high stability and low jitter. The surface mount package is designed for highdensity mounting and is optimum for mass production. TABLE 3.0 FEATURES HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) TABLE 4.0 MINIMUM 4.5 - NOMINAL - MAXIMUM 50 0.4 UNITS pF Vdc Vdc -8 40 - 50 2 8 60 6 mA mA % nS Start-Up Time - - 10 mS Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) - - 1 ps rms (Voh) (Vol) Current (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 20% to 80% 2 (Ioh) (Ioh) NOTE 1 MHz to 156.25 MHz 5.0V OPERATION FREQUENCY TOLERANCE: ±25ppm TEMPERATURE RANGE: -20 to 70°C LOW JITTER: >1 pS RMS TRI-STATE ENABLE / DISABLE CERAMIC SURFACE MOUNT PACKAGE PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed ceramic package TAPE AND REEL PACKAGING Note: 1) Inclusive of calibration @ 25°C, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2) Oscillator output is enabled with no connection on pad 1 ORDERING INFORMATION CWX815 4 12.288 20 29.4912 40 66 155.52 5 14.31818 24 30 44.736 75 156.25 Connection Enable/Disable Ground Output Vcc TABLE 8.0 Enable / Disable Function Pin 1 Open Pin 1 > 2.2V Pin 1 < 0.8V Output Pin 3 Active Pin 3 Active Pin 3 High Impedance CLOCK SERIES CENTER FREQUENCY .189±.007 (4.8±0.2mm) .102 (2.60mm) .04.±.004 (1.0±.115mm) .287±.007 (7.3±0.2mm) CW X815 100.00M 0426 3.6864 12 19.44 29.498928 36 60 125 TABLE 7.0 Pad 1 2 3 4 - 100.00 MHz TABLE 6.0 Standard Frequencies Available (MHz) 1.544 1.8432 2.048 6.48 10 11.0592 15.36 16 16.896 24.576 25 27 32.768 33 33.33 48 49.152 50 80 100 106.25 .055 (1.40mm) .200 (5.08mm) Specifications subject to change without notice. DATA SHEET #: Sm110 PAGE 1 OF 2 REV: 00 DATE: 7/28/04 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. HTTP://WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Specifications subject to change without notice. DATA SHEET #: Sm110 PAGE 2 OF 2 REV: 00 DATE: 7/28/04 aCopyright 2001 Connor-Winfield all rights reserved.