SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 D D D D D D Member of the Texas Instruments Widebus Family Independent Asynchronous Inputs and Outputs Read and Write Operations Can Be Synchronized to Independent System Clocks Programmable Almost-Full/Almost-Empty Flag Pin-to-Pin Compatible With SN74ACT7882, SN74ACT7884, and SN74ACT7811 Input-Ready, Output-Ready, and Half-Full Flags D D D D D Cascadable in Word Width and/or Word Depth Fast Access Times of 13 ns With a 50-pF Load High Output Drive for Direct Bus Interface Released as DSCC SMD (Standard Microcircuit Drawing) 5962-9562701QYA and 5962-9562701NXD Package Options Include 68-Pin Ceramic Quad Flat (HV) and 80-Pin Plastic Quad Flat (PN) Packages D15 D16 D17 GND RDCLK RDEN1 RDEN2 OE RESET VCC GND OR VCC Q17 Q16 GND Q15 HV PACKAGE (TOP VIEW) 9 10 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 60 11 59 12 58 13 57 14 56 15 55 16 54 17 53 18 52 19 51 20 50 21 49 22 48 23 47 24 46 25 45 VCC Q14 Q13 GND Q12 Q11 VCC Q10 Q9 GND Q8 Q7 VCC Q6 Q5 GND Q4 Q0 Q1 GND Q2 Q3 V CC AF/AE GND IR HF V CC WRTEN2 V CC 26 44 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 DAF GND WRTCLK WRTEN1 D14 D13 D12 D11 D10 D9 VCC D8 GND D7 D6 D5 D4 D3 D2 D1 D0 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Widebus is a trademark of Texas Instruments Incorporated. Copyright 1998, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 GND GND Q4 Q14 Q13 GND GND Q12 Q11 VCC Q10 Q9 GND Q8 Q7 VCC Q6 Q5 Q15 VCC PN PACKAGE (TOP VIEW) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 2 59 3 58 4 57 5 56 6 55 7 54 8 53 9 52 10 51 11 50 12 49 13 48 14 47 15 46 16 45 17 44 18 43 19 42 20 41 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VCC VCC NC Q3 Q2 GND Q1 Q0 VCC HF IR GND GND AF/AE VCC WRTEN2 WRTEN1 WRTCLK GND NC D8 GND D7 D6 D5 D4 D3 D2 D1 D0 DAF NC 1 NC D14 D13 D12 D11 D10 D9 V CC NC GND GND Q16 Q17 VCC OR GND VCC RESET OE RDEN2 RDEN1 RDCLK GND D17 D16 D15 NC NC NC – No internal connection description A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN54ACT7881 is organized as 1024 × 18 bits and processes data with rates up to 50 MHz and access times of 13 ns in a bit-parallel format. Data outputs are noninverting with respect to the data inputs. Expansion is accomplished easily in both word width and word depth. The SN54ACT7881 has normal input-bus to output-bus asynchronous operation. The special enable circuitry adds the ability to synchronize independent reads and writes to their respective system clocks. The SN54ACT7881 is characterized for operation over the full military temperature range of –55°C to 125°C. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 logic symbol† RESET WRTCLK WRTEN1 WRTEN2 RDCLK RDEN1 OE RDEN2 DAF D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 1 Φ FIFO 1024 × 18 RESET 29 WRTCLK 30 & 31 5 WRTEN RDCLK 4 2 IN RDY HALF FULL ALMOST FULL/EMPTY OUT RDY & EN1 35 36 33 66 IR HF AF/AE OR RDEN 3 27 26 DEF ALMOST FULL 0 0 38 25 39 24 41 23 42 22 44 21 46 20 47 19 49 17 Data 15 Data 50 1 52 14 53 13 55 12 56 11 58 10 59 9 61 8 63 7 17 17 64 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q10 Q11 Q12 Q13 Q14 Q15 Q16 Q17 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the HV package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 functional block diagram OE D0–D17 RDCLK RDEN1 RDEN2 Synchronous Read Control Location 1 Location 2 Read Pointer RAM 1024 × 18 WRTCLK WRTEN1 WRTEN2 Synchronous Write Control Write Pointer • • Register Reset Logic Q0–Q17 RESET OR StatusFlag Logic DAF IR HF AF/AE 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 Terminal Functions TERMINAL† NAME NO. I/O DESCRIPTION Almost-full/almost-empty flag. The AF/AE boundary is defined by the AF/AE offset value (X). This value can be programmed during reset, or the default value of 256 can be used. AF/AE is high when the FIFO contains (X + 1) or fewer words or (1025 – X) or more words. AF/AE is low when the FIFO contains between (X + 2) and (1024 – X) words. Programming procedure for AF/AE – The AF/AE flag is programmed during each reset cycle. The AF/AE offset value (X) is either a user-defined value or the default of X = 256. Instructions to program AF/AE using both methods are as follows: AF/AE 47 O User-defined X Step 1: Take DAF from high to low. Step 2: If RESET is not already low, take RESET low. Step 3: With DAF held low, take RESET high. This defines the AF/AE using X. Step 4: To retain the current offset for the next reset, keep DAF low. Default X To redefine AF/AE using the default value of X = 256, hold DAF high during the reset cycle. 39 I Define-almost-full. The high-to-low transition of DAF stores the binary value of data inputs as the AF/AE offset value (X). With DAF held low, a low pulse on RESET defines the AF/AE flag using X. 18–16, 27–22, 29, 38–31 I Data inputs for 18-bit-wide data to be stored in the memory. A high-to-low transition of DAF captures data for the AF/AE offset (X) from D8–D0. HF 51 O Half-full flag. HF is high when the FIFO contains 512 or more words and is low when the number of words in memory is less than half the depth of the FIFO. IR 50 O Input-ready flag. IR is high when the FIFO is not full and low when the device is full. During reset, IR is driven low on the rising edge of the second WRTCLK pulse. IR is then driven high on the rising edge of the second WRTCLK pulse after RESET goes high. After the FIFO is filled and IR is driven low, IR is driven high on the second WRTCLK pulse after the first valid read. OE 11 I Output enable. The Q0–Q17 outputs are in the high-impedance state when OE is low. OE must be high before the rising edge of RDCLK to read a word from memory. 7 O Output-ready flag. OR is high when the FIFO is not empty and low when the FIFO is empty. During reset, OR is set low on the rising edge of the third RDCLK pulse. OR is set high on the rising edge of the third RDCLK pulse to occur after the first word is written into the FIFO. OR is set low on the rising edge of the first RDCLK pulse after the last word is read. Q0–Q17 4, 5, 53, 54, 56, 57, 61, 64, 65, 67, 68, 70, 71, 73, 74, 77, 78, 80, O Data outputs. The first data word to be loaded into the FIFO is moved to Q0–Q17 on the rising edge of the third RDCLK pulse to occur after the first valid write. RDEN1 and RDEN2 do not affect this operation. Following data is unloaded on the rising edge of RDCLK when RDEN1, RDEN2, OE, and OR are high. RDCLK 14 I Read clock. Data is read out of memory on the low-to-high transition of RDCLK if OR, OE, RDEN1, and RDEN2 are high. RDCLK is a free-running clock and functions as the synchronizing clock for all data transfers out of the FIFO. OR also is driven synchronously with respect to RDCLK. RDEN1 RDEN2 13 12 I Read enable. RDEN1 and RDEN2 must be high before a rising edge on RDCLK to read a word out of memory. RDEN1 and RDEN2 are not used to read the first word stored in memory. DAF D0–D17 OR RESET 10 I Reset. A reset is accomplished by taking RESET low and generating a minimum of four RDCLK and WRTCLK cycles. This ensures that the internal read and write pointers are reset and that OR, HF, and IR are low, and AF/AE is high. The FIFO must be reset upon power up. With DAF at a low level, a low pulse on RESET defines AF/AE using the AF/AE offset value (X), where X is the value previously stored. With DAF at a high level, a low-level pulse on RESET defines the AF/AE flag using the default value of X = 256. WRTCLK 29 I Write clock. Data is written into memory on a low-to-high transition of WRTCLK if IR, WRTEN1, and WRTEN2 are high. WRTCLK is a free-running clock and functions as the synchronizing clock for all data transfers into the FIFO. IR also is driven synchronously with respect to WRTCLK. WRTEN1 WRTEN2 30 31 I Write enable. WRTEN1 and WRTEN2 must be high before a rising edge on WRTCLK for a word to be written into memory. WRTEN1 and WRTEN2 do not affect the storage of the AF/AE offset value (X). † Terminals listed are for the PN package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ RESET Don’t Care DAF 1 WRTCLK WRTEN1 Don’t Care WRTEN2 Don’t Care D0–D17 Don’t Care 1 RDCLK 2 3 Don’t Care RDEN2 Don’t Care 1 2 X† 2 RDEN1 4 3 4 OE Invalid Q0–Q17 ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎ Invalid OR AF/AE Invalid HF Invalid IR Invalid Store the Value of Data as X Define the AF/AE Flag Using the Programmed Value of X † X is the binary value on D8–D0. Figure 1. Reset Cycle: Define AF/AE Flag Using a Programmed Value of X 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 RESET Don’t Care DAF 1 WRTCLK WRTEN1 WRTEN2 D0–D17 RDCLK RDEN1 RDEN2 OE Q0–Q17 OR AF/AE HF IR 2 3 4 1 2 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ Don’t Care Don’t Care Don’t Care 1 2 3 4 Don’t Care Don’t Care Invalid Invalid Invalid Invalid Define the AF/AE Flag Using the Default Value of X = 256 Figure 2. Reset Cycle: Define AF/AE Flag Using the Default Value of X = 256 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ RESET Don’t Care DAF WRTCLK WRTEN1 WRTEN2 D0–D17 RDCLK W1 W2 W3 W4 1 2 3 W(X+2) A B RDEN1 RDEN2 ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ OE Q0–Q17 Invalid W1 OR AF/AE HF IR DATA-WORD NUMBERS FOR FLAG TRANSITIONS TRANSITION WORD A B C W513 W(1025 – X) W1025 Figure 3. Write Cycle 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 C SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 RESET DAF WRTCLK ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Don’t Care 1 2 WRTEN1 WRTEN2 D0–D17 RDCLK Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Î ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ Don’t Care F RDEN1 RDEN2 OE Q0–Q17 W1 W1 W2 W3 W(X+1) W(X+2) A B C D E F OR AF/AE HF IR DATA-WORD NUMBERS FOR FLAG TRANSITIONS TRANSITION WORD A B C D E F W513 W514 W(1024 – X) W(1025 – X) W1024 W1025 Figure 4. Read Cycle POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Voltage range applied to a disabled 3-state output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 5.5 V Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions MIN MAX 4.5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 V High-level output current –8 mA IOL TA Low-level output current 16 mA 125 °C High-level input voltage 2 Operating free-air temperature –55 V V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VOH VOL VCC = 4.5 V, VCC = 4.5 V, IOH = –8 mA IOL = 16 mA II IOZ VCC = 5.5 V, VCC = 5.5 V, VI = VCC or 0 VO = VCC or 0 ICC§ VI = VCC – 0.2 V or 0 One input at 3.4 V, Ci Co VI = 0, VO = 0, POST OFFICE BOX 655303 TYP‡ MAX 2.4 UNIT V Other inputs at VCC or GND 0.5 V ±5 µA ±5 µA 400 µA 1.2 mA f = 1 MHz 4 pF f = 1 MHz 8 pF ‡ All typical values are at VCC = 5 V, TA = 25°C. § ICC is tested with outputs open. 10 MIN • DALLAS, TEXAS 75265 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 timing requirements over recommended ranges of supply voltage and operating free-air temperature (see Figures 1 through 4) MIN fclock Clock frequency WRTCLK high Pulse duration th Setup time Hold time MHz 7.5 RDCLK high 7 RDCLK low 7 DAF high 7 D0–D17 before WRTCLK↑ 5 WRTEN1, WRTEN2 high before WRTCLK↑ 5 OE, RDEN1, RDEN2 high before RDCLK↑ tsu UNIT 50 7 WRTCLK low tw MAX Reset: RESET low before first WRTCLK↑ and RDCLK↑† 5 ns 6* Define AF/AE: D0–D8 before DAF↓ 5 Define AF/AE: DAF↓ before RESET↑ 6 Define AF/AE (default): DAF high before RESET↑ 5 D0–D17 after WRTCLK↑ 0 WRTEN1, WRTEN2 high after WRTCLK↑ 0 OE, RDEN1, RDEN2 high after RDCLK↑ Reset: RESET low after fourth WRTCLK↑ and RDCLK↑† ns 0.5 ns 0* Define AF/AE: D0–D8 after DAF↓ 1 Define AF/AE: DAF low after RESET↑ 0 Define AF/AE (default): DAF high after RESET↑ 0 * On products compliant to MIL-PRF-38535, this parameter is not production tested . † To permit the clock pulse to be utilized for reset purposes switching characteristics over recommended ranges of supply voltage and operating free-air temperature, CL = 50 pF (unless otherwise noted) (see Figure 5) PARAMETER FROM (INPUT) fmax WRTCLK or RDCLK tpd tpd‡ RDCLK↑ Any Q tpd d TO (OUTPUT) MIN MAX 50 MHz 3 13 RDCLK↑ Any Q WRTCLK↑ IR 2 9.5 RDCLK↑ OR 2 9.5 6 19 6 19 WRTCLK↑ AF/AE RDCLK↑ UNIT ns ns ns tPLH tPHL WRTCLK↑ HF 6 17 ns RDCLK↑ HF 6 17 ns tPLH RESET↓ AF/AE 3 17 ns tPHL RESET↓ HF 3 19 ns OE Any Q 2 11 ns Any Q 2 14 ns ten tdis OE ‡ This parameter is measured with CL = 30 pF (see Figure 5). POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance per 1K bits CL = 50 pF, TYP f = 5 MHz UNIT 65 pF PARAMETER MEASUREMENT INFORMATION 5V 1.1 kΩ From Output Under Test 680 Ω 30 pF (see Note A) LOAD CIRCUIT 3V 3V Timing Input High-Level Input 1.5 V 1.5 V 1.5 V GND GND Data, Enable Input tw th tsu 3V 1.5 V 3V Low-Level Input 1.5 V GND 1.5 V GND VOLTAGE WAVEFORMS PULSE DURATIONS VOLTAGE WAVEFORMS SETUP AND HOLD TIMES Output Enable 1.5 V 3V 1.5 V 1.5 V GND tPLZ tPZL Low-Level Output ≈3V 1.5 V VOL 3V ≈0V tpd tpd VOH 1.5 V 1.5 V GND tPZH High-Level Output 1.5 V Input VOH In-Phase Output 1.5 V 1.5 V VOL tPHZ VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES NOTES: A. Includes probe and jig capacitance B. tPZL and tPZH are the same as ten. C. tPLZ and tPHZ are the same as tdis. Figure 5. Load Circuit and Voltage Waveforms 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs LOAD CAPACITANCE POWER-DISSIPATION CAPACITANCE vs SUPPLY VOLTAGE 18 68 t pd – Propagation Delay Time – ns 17 Cpd – Power Dissipation Capacitance – pF VCC = 5 V RL = 500 Ω TA = 25°C 16 15 14 13 12 11 67 fi = 5 MHz TA = 25°C CL = 50 pF 66 65 64 63 62 10 0 50 100 150 200 250 300 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 VCC – Supply Voltage – V CL – Load Capacitance – pF Figure 6 Figure 7 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 13 SN54ACT7881 1024 × 18 CLOCKED FIRST-IN, FIRST-OUT MEMORY SGAS004A – AUGUST 1995 – REVISED APRIL 1998 APPLICATION INFORMATION expanding the SN54ACT7881 The SN54ACT7881 is expandable in both word width and word depth. Word-depth expansion is accomplished by connecting the devices in series such that data flows through each device in the chain. Figure 9 shows two SN54ACT7881 devices configured for word-depth expansion. The common clock between the devices can be tied to either the write clock (WRTCLK) of the first device or the read clock (RDCLK) of the last device. The output-ready flag (OR) of the previous device and the input-ready flag (IR) of the next device maintain data flow to the last device in the chain whenever space is available. Figure 10 shows two SN54ACT7881 devices in word-width expansion. Word-width expansion is accomplished by simply connecting all common control signals between the devices and creating composite input-ready (IR) and output-ready (OR) signals. The almost-full/almost-empty flag (AF/AE) and half-full flag (HF) can be sampled from any one device. Word-depth expansion and word-width expansion can be used together. CLK SN54ACT7881 SN54ACT7881 WRTCLK WRTEN1 WRTCLK WRTEN1 RDCLK OR WRTCLK WRTEN1 RDCLK RDEN1 RDCLK RDEN1 WRTEN2 IR WRTEN2 IR RDEN1 RDEN2 WRTEN2 IR RDEN2 OR RDEN2 OR OE D0–D17 D0–D17 OE 5V D0–D17 Q0–Q17 Q0–Q17 OE Q0–Q17 Figure 8. Word-Depth Expansion: 2048/4096/8192 Words × 18 Bits, N = 2 SN54ACT7881 WRTCLK WRTEN WRTCLK WRTEN1 RDCLK RDEN1 WRTEN2 IR RDEN2 OR OE D18–D35 IR D0–D17 Q0–Q17 RDCLK RDEN OE Q18–Q35 OR SN54ACT7881 WRTCLK WRTEN1 RDCLK RDEN1 WRTEN2 IR RDEN2 OR OE D0–D17 D0–D17 Q0–Q17 Figure 9. Word-Width Expansion: 1024 Words × 36 Bits 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Q0–Q17 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated