Rectangular LED Array G30B and G32XB Series The G30B is made up of a 10 LED lamps. The design of the G30B precludes cutting of the holder to make different length units. The G32XB is made up of a maximum of 10 lamps per array. The G30B array has a shoulder top and bottom. The leads can be formed to allow right angle mounting if desired. 2.4 6.3 4.8 2.5 3.5 7.1 7.6 5 8 1 2 3 6.0 1 5 2 3 4 9 10 10 L = 6X + 1 79.6 2 78.2 9.5 8 G32XB Anode 1.0 min Anode 1.0 min 2.54 2 G30B 2.54 Specify part desired as follows: (X = total number of LEDs in array, 10 only for G30XB and up to 10 for G32XB.) G30B(or G32XB)/Order Code LED1 + Order Code LED 2 + ... + Order Code LED X For example: “G3210B/4I+4Y+2G” designates an assembly with 4 red, 4 yellow, and 2 green LEDs in that order. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 0.8 130 5-10 G30XB Tinted Diffused Resistor Required Hi Eff Red I 635 2.0 2.5 130 10-20 G32XB Tinted Diffused Resistor Required Green G 565 2.1 2.5 130 10-20 Yellow Y 585 2.0 2.5 130 10-20 Red H 697 2.1 0.5 124 5-10 Hi Eff Red I 635 2.0 1.0 124 10-20 Green G 565 2.1 1.0 124 10-20 Yellow Y 585 2.0 1.0 124 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-53