T-1 LED Indicator, Right-angle, PCB Mount J946B Series The J946B is made up of 2 T-1 LED lamps assembled into a black plastic holder and can be CMOS driven to save components. The leads are formed at right angles to the light emitting side of the assembly for through hole mounting on PCBs. The design of the J946B holder maintains all external dimensions but will be cored in appropriate places to minimize sink marks. Material of the housing is black Nylon 6/6 with fiber, rated UL94V0. Please note that the dimensions are in inches. .14 .19 max Pin Connection: .28 .125 max + – (typ for single color) .600 .85 max Green Anode .55 Red or yellow Anode (typ for bi-color) .15 .12 min + .150 .15 .100 .45 Specify part desired as follows: J946B/Order Code LED1 + Order Code LED 2 For example: “J946B/H+G” designates a red LED on top with a green LED below. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=2 mA (Deg) Recom. Op. If (mA) 1.8 4.0 50 2 - 10 Color Order Code Red I 639 Green G 575 1.7 2.5 60 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A