T-1 3/4 (5mm) HOUSING FOR LED LAMP PRELIMINARY SPEC Part Number: WP7113WYP/VGC/Z GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zOUTSTANDING MATERIAL EFFICIENCY. The Green source color devices are made with InGaN zRELIABLE AND RUGGED. Light Emitting Diode. zIC COMPATIBLE/LOW CURRENT CAPABILITY. Static electricity and surge damage the LEDS. zHOUSING MATERIAL: PPA. It is recommended to use a wrist band or anti-electrostatic zPACKAGE : 65 PCS/TUBE. glove when handling the LEDs. zHIGH TEMPERATURE RESISTANT HOUSING. All devices, equipment and machinery must be electrically zRoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAH0993 REV NO: V.1 DATE: DEC/30/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009574 Selection Guide Dice Part No. WP7113WYP/VGC/Z Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 10000 22000 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 525 nm IF=20mA Green 535 nm IF=20mA Spectral Line Half-width Green 39 nm IF=20mA C Capacitance Green 65 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 3.7 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH0993 REV NO: V.1 DATE: DEC/30/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009574 Green WP7113WYP/VGC/Z SPEC NO: DSAH0993 REV NO: V.1 DATE: DEC/30/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009574 WP7113WYP/VGC/Z IC Tube Dimensions Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAH0993 REV NO: V.1 DATE: DEC/30/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009574 PACKING & LABEL SPECIFICATIONS WP7113WYP/VGC/Z SPEC NO: DSAH0993 REV NO: V.1 DATE: DEC/30/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1102009574