Europa: +49 / 7731 8399 0 Email: [email protected] USA: +1 / 508 539 0002 Email: [email protected] Asia: +852 / 2955 1682 Email: [email protected] Dimensions (mm) Part Number: Optocoupler: 5252203000 522-03-i Layout / Pitch Test circuit 2,54 mm / Top View Marking MEDER-Label Type Prod.-CodeEN60062 /Factory Code Pins: ∅ 0,65 mm / L 3,2 +0,8 -0,3 mm Electrical Characteristics Conditions (at TA= 25°C) Isolation Voltage Input / Output Insulation Resistance Input / Output Coupling Capacitance Collektor-Emitter Saturation Voltage Collektor Dark Current Cut-Off Frequency Current Transfer Ratio IC / IF RH 45% IF 10 mA, IC 1 mA UCE= 20 V, R= 1 MΩ, IF= 0 mA IF=10 mA, UCE=5 V, RL=100 Ω IF= 10 mA Symbol VIO RIO CC VCEsat ICEO FCO CTR Min. Typ. Max. 4.000 1012 0,4 0,3 0,2 50 0,8 0,5 Units VDC Ω pF V µA kHz Coupled Device Creeping Distance Air Path Input / Output Insulation through Thickness 12 12 2 mm mm mm Switching Time Turn-on Time Turn-off Time IF=10 mA, UCE=5 V, RL=100 Ω IF=10 mA, UCE=5 V, RL=100 Ω Ton Toff µs µs 5,5 4,2 Maximum Ratings Emitter Reverse Voltage DC Forward Current Surge Forward Current Power Dissipation Forward Voltage Current Reduction VR IF IFS PTOT VF t ≤10 µs 5 75 500 100 1,5 0,73 V mA mA mW V mA/°C Maximum Ratings Detector Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Collector Peak Current Power Dissipation Power Reduction VCE VEC IC ICM PTOT t ≤10 ms 32 5 50 100 100 0,91 V V mA mA mW mW/°C Environmental Data Ambient Temperatur Range Storage Temperatur Range Soldering Temperature Cleaning Material of Case Sealing Compound Material of Pins Remarks TA Tstg - 40 - 40 Optocoupler approved according to PTB 01 ATEX 2043 U. Customer / Customer part number Standard Part 5 sec. at Modifications in the sense of technical progress are reserved [VOKp-02.doc] REVISION / Rev. No.: 03 Page 1 of 1 DESIGNED BY: REVISED BY: E.Bunke W.Kovacs APPROVED BY: APPROVED BY: R.Rippl K.Olbrich + 85 + 100 260 fully sealed Plastics Polyurethan Cu-alloy tinned DATE : DATE : °C °C °C 1999-01-26 25.01.2008