TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 N-CHANNEL MOSFET Qualified per MIL-PRF-19500/592 DEVICES LEVELS 2N7227 2N7227U JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Drain – Source Voltage VDS 400 Vdc Gate – Source Voltage Continuous Drain Current VGS ± 20 Vdc ID1 14.0 Adc ID2 9.0 Adc Ptl 150 (1) W Rds(on) 0.315 (2) Ω Top, Tstg -55 to +150 °C TC = +25°C Continuous Drain Current TC = +100°C Max. Power Dissipation TC = +25°C Drain to Source On State Resistance Operating & Storage Temperature TO-254AA Note: (1) Derated Linearly by 1.2 W/°C for TC > +25°C (2) VGS = 10Vdc, ID = 9A ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions Symbol Min. Drain-Source Breakdown Voltage VGS = 0V, ID = 1mAdc V(BR)DSS 400 VGS(th)1 VGS(th)2 VGS(th)3 2.0 1.0 Gate-Source Voltage (Threshold) VDS ≥ VGS, ID = 0.25mA VDS ≥ VGS, ID = 0.25mA, Tj = +125°C VDS ≥ VGS, ID = 0.25mA, Tj = -55°C Gate Current VGS = ±20V, VDS = 0V VGS = ±20V, VDS = 0V, Tj = +125°C Drain Current VGS = 0V, VDS = 320V VGS = 0V, VDS = 320V, Tj = +125°C Static Drain-Source On-State Resistance VGS = 10V, ID = 9.0A pulsed VGS = 10V, ID = 14.0A pulsed Tj = +125°C VGS = 10V, ID = 9.0A pulsed Diode Forward Voltage VGS = 0V, ID = 14A pulsed T4-LDS-0050 Rev. 2 (101154) Max. Unit Vdc 4.0 Vdc 5.0 IGSS1 IGSS2 ±100 ±200 nAdc IDSS1 IDSS2 25 0.25 µAdc mAdc rDS(on)1 rDS(on)2 0.315 0.415 Ω Ω rDS(on)3 0.68 Ω VSD 1.7 Vdc U-PKG (U3) TO-276AB Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Gate Charge: On-State Gate Charge Gate to Source Charge Gate to Drain Charge Symbol VGS = 10V, ID = 14A VDS = 50V Min. Qg(on) Qgs Qgd Max. Unit 110 18 65 nC Max. Unit SWITCHING CHARACTERISTICS Parameters / Test Conditions Switching time tests: Turn-on delay time Rinse time Turn-off delay time Fall time Diode Reverse Recovery Time T4-LDS-0050 Rev. 2 (101154) Symbol ID = 14A, VGS = 10Vdc, Gate drive impedance = 7.5Ω, VDD = 200Vdc di/dt ≤ 100A/µs, VDD ≤ 30V, IF = 14A Min. td(on) tr td(off) tf 35 190 170 130 trr 1200 ns ns Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Ltr. BL Inches Min Max .535 .545 Millimeters Min Max 13.59 13.84 CH .249 .260 6.32 6.60 LD .035 .045 0.89 1.14 LL .510 .570 12.95 14.48 LO .150 BSC 3.81 BSC LS .150 BSC 3.81 BSC MHD .139 .149 3.53 3.78 MHO .665 .685 16.89 17.40 TL .790 .800 20.07 20.32 TT .040 .050 1.02 1.27 TW .535 .545 13.59 13.84 Term 1 Drain Term 2 Source Term 3 Gate Note 3, 4 3, 4 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Glass meniscus included in dimension D and E. 4. All terminals are isolated from the case. 5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 1. Physical dimensions for TO-254AA T4-LDS-0050 Rev. 2 (101154) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Ltr. BL Inches Min Max .620 .630 Millimeters Min Max 15.75 16.00 BW .445 11.30 CH .455 .142 11.56 3.60 LH .010 .020 0.26 0.50 LL1 .410 .420 10.41 10.67 LL2 .152 .162 3.86 4.11 LS1 .210 BSC 5.33 BSC LS2 .105 BSC 2.67 BSC LW1 .370 .380 9.40 9.65 LW2 .135 .145 3.43 3.68 Q1 .030 0.76 Q2 .035 0.89 Term 1 Drain Term 2 Source Term 3 Gate NOTES: 1. 2. 3. 4. Dimensions are in inches. Millimeters are given for information only. The lid shall be electrically isolated from the drain, gate and source. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 2. Dimensions and configuration of surface mount package outline (TO-276AB) 2N7224U, 2N7225U, 2N7227U, and 2N7228U. T4-LDS-0050 Rev. 2 (101154) Page 4 of 4