TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 P-CHANNEL MOSFET Qualified per MIL-PRF-19500/595 DEVICES LEVELS 2N7236 2N7236U JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Drain – Source Voltage VDS -100 Vdc Gate – Source Voltage Continuous Drain Current VGS ± 20 Vdc ID1 -18 Adc ID2 -11 Adc TC = +25°C Continuous Drain Current TC = +100°C Max. Power Dissipation TC = +25°C Drain to Source On State Resistance Operating & Storage Temperature Ptl Rds(on) Top, Tstg 125 (1) W 0.20 (2) Ω -55 to +150 TO-254AA °C Note: (1) Derated Linearly by 1.0 W/°C for TC > +25°C (2) VGS = 10Vdc, ID = -11A ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions Symbol Min. V(BR)DSS -100 VGS(th)1 VGS(th)2 VGS(th)3 -2.0 -1.0 Max. Unit OFF CHARACTERTICS Drain-Source Breakdown Voltage VGS = 0V, ID = 1mAdc Gate-Source Voltage (Threshold) VDS ≥ VGS, ID = -0.25mA VDS ≥ VGS, ID = -0.25mA, Tj = +125°C VDS ≥ VGS, ID = -0.25mA, Tj = -55°C Gate Current VGS = ±20V, VDS = 0V VGS = ±20V, VDS = 0V, Tj = +125°C Drain Current VGS = 0V, VDS = -80V VGS = 0V, VDS = -100V, Tj = +125°C VGS = 0V, VDS = -80V, Tj = +125°C Static Drain-Source On-State Resistance VGS = 10V, ID = -11A pulsed VGS = -10V, ID = -18A pulsed Tj = +125°C VGS = -10V, ID = -11A pulsed Diode Forward Voltage VGS = 0V, ID = -18A pulsed T4-LDS-0061 Rev. 2 (101873) Vdc -4.0 U-PKG (SMD-1) (TO-267AB) Vdc -5.0 IGSS1 IGSS2 ±100 ±200 nAdc IDSS1 IDSS2 IDSS3 -25 -1.0 -0.25 µAdc mAdc mAdc rDS(on)1 rDS(on)2 0.20 0.22 Ω Ω rDS(on)3 0.34 Ω VSD -5.0 Vdc Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Gate Charge: On-State Gate Charge Gate to Source Charge Gate to Drain Charge Symbol VGS = -10V, ID = -18A VDS = -50V Min. Qg(on) Qgs Qgd Max. Unit 60 13 35.2 nC Max. Unit SWITCHING CHARACTERISTICS Parameters / Test Conditions Switching time tests: Turn-on delay time Rinse time Turn-off delay time Fall time Diode Reverse Recovery Time T4-LDS-0061 Rev. 2 (101873) Symbol ID = -11A, VGS = -10Vdc, Gate drive impedance = 9.1Ω, VDD = -50Vdc di/dt ≤ 100A/µs, VDD ≤ 30V, ID = -18A Min. td(on) tr td(off) tf 35 85 85 65 trr 280 ns ns Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS BL Dimensions Inches Millimeters Min Max Min Max .535 .545 13.59 13.84 CH .249 .260 6.32 6.60 LD .035 .045 0.89 1.14 LL .510 .570 12.95 14.48 Ltr LO .150 BSC 3.81 BSC LS .150 BSC 3.81 BSC Notes 3 MHD .139 .149 3.53 3.78 MHO .665 .685 16.89 17.40 TL .790 .800 20.07 20.32 4 TT .040 .050 1.02 1.27 4 TW .535 .545 13.59 13.84 Term 1 Drain Term 2 Term 3 Source Gate NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Protrusion thickness of ceramic eyelets included in dimension LL. 4. All terminals are isolated from case. 5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 1. Physical dimensions for TO-254AA (2N7236). T4-LDS-0061 Rev. 2 (101873) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Dimensions Letter BL BW CH LH LL1 LL2 LS1 LS2 LW1 LW2 Q1 Q2 Term 1 Term 2 Term 3 Inches Min .620 .445 Max .630 .455 .142 .010 .020 .410 .420 .152 .162 .210 BSC .105 BSC .370 .380 .135 .145 .030 .035 Millimeters Min Max 15.75 16.00 11.30 11.56 3.60 0.26 0.50 10.41 10.67 3.86 4.11 5.33 BSC 2.67 BSC 9.40 9.65 3.43 3.68 0.76 0.89 Drain Gate Source NOTES: 1. Dimensions are in inches. 2. Millimeters are given for information only. 3. The lid shall be electrically isolated from the drain, gate and source. 4. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 2. Dimensions and configuration of surface mount package outline (TO-267AB), 2N7236U. T4-LDS-0061 Rev. 2 (101873) Page 4 of 4