IF SAW Filter Part Number Package Application Last Modified 807-IF204.0M-A 7.0 x 5.0mm SMD Base Station & Repeater Apr 18, 2007 . TYPE : 204.0 MHz Bandpass Filter PART NUMBER : 807-IF204.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency (Fo) - 204.0 - MHz Insertion Loss at Fo - 9.2 11 dB Source Impedance* - 50/500 - ohm Load Impedance* - 50/1000 - ohm -10 - +70 °C Operating Temperature Range - 0.03 - ppm/° C Bandwidth at -1.0 dB 600 900 - kHz Relative Attenuation: - - - - from 194 MHz to 200 MHz 40 47 - dB from 200MHz to 201.5MHz 40 45 - dB from 206.5MHz to 209MHz 40 43 - dB from 209MHz to 214MHz 40 46 - dB Amplitude Ripple (203.7MHz ~ 204.3MHz) - 0.6 1.0 dBp-p Absolute Delay at Fo - 0.75 - µsec Group Delay Variation (203.7MHz ~ 204.3MHz) - 35 200 nsec Temperature Coefficient *Single Ended or Balanced with Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary. . PACKAGE OUTLINE (mm) TESTING ENVIROMENT FREQUENCY RESPONSE Part No.: 807-IF204.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map