IF SAW Filter Part Number Package Application Last Modified 813-IF62.5M-BC 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 . TYPE : 62.5 MHz Bandpass Filter Low Loss 20.85 MHz Bandwidth PART NUMBER : 813-IF62.5M-BC .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - Insertion Loss at Fo - 62.5 - MHz 22.0 23.5 Source Impedance (single ended)* dB - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth at -1.0 dB 19.80 20.10 - MHz Bandwidth at -3.0 dB 20.85 21.15 - MHz Bandwidth at -40.0 dB - 25.80 26.20 MHz Relative Attenuation: - - - - Lower Sidelobe 40 45 - dB Upper Sidelobe 40 45 - dB Amplitude Ripple - 0.5 1.0 dBp-p Group Delay Variation - 25 50 nsec Absolute Delay at Fo - 0.85 - µsec IN/OUT Return Loss at Fo - - - dB Temperature Coefficient - -94 - ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE TEST FIXTURE (mm) L1 = 180nH - - L2 = 150nH C2 = 20pF Source/Load Impedance = 50 ohms FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 813-IF62.5M-BC