Oscilent Corporation IF SAW Filter | 827-IF140.0M-E Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 827-IF140.0M-E 27.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 . TYPE : 140.0 MHz Bandpass Filter 250 KHz Bandwidth PART NUMBER : 827-IF140.0M-E . Horizontal : 1.0 MHz/Div Veritical : 10 dB/Div Horizontal : 0.1 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units MHz 139.96 140.0 140.04 Insertion Loss - 21.0 24.0 dB 1dB Bandwidth 0.14 0.18 - MHz 3dB Bandwidth 0.25 0.31 - MHz 40dB Bandwidth - 0.84 0.90 MHz Group Delay Variation - 55 150 nsec Center Frequency - 3.616 - µsec Ultimate Rejection 40 50 - dB Substrate Material - Qz - - Ambient Temperature - 25 - °C Phase Linearity - 1.0 7.0 deg Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_827_if140_0e.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 827-IF140.0M-E Page 2 of 2 Source/Load Impedance = 50 ohms Part No.: 827-IF140.0M-E Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_827_if140_0e.htm 12/28/2005