Oscilent Corporation IF SAW Filter | 813-SL70.0M-03 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL70.0M-03 13.3 x 6.5 SMD Base Station & Repeater Jan. 01, 2007 . TYPE : Low Loss 70.0 MHz Bandpass Filter 3.0 MHz Bandwidth PART NUMBER : 813-SL70.0M-03 . FREQUENCY CHARACTERISTICS Horizontal : 3.0 MHz/Div Veritical : 10 dB/Div Horizontal : 0.6 MHz/Div Veritical : 1 dB/Div Veritical : 200 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Minimum Typical Maximum Units 69.85 70.0 70.15 MHz Insertion Loss - 7.7 8.2 dB 1dB Bandwidth 2.4 2.85 - MHz 3dB Bandwidth 3.0 3.55 - MHz 40dB Bandwidth - 6.18 6.8 MHz Passband Ripple - 0.65 1.0 dB Group Delay Variation - 145 190 nsec - 1.07 - usec Ultimate Rejection 40 45 - dB Substrate Material - YZ-LN - - Ambient Temperature - 25 - °C Temperature Coefficient - -94 - ppm/C Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL70.0M-03 L1 = 220nH L2 = 56nH Page 2 of 2 - C2= 22pF Source/Load Impedance = 50 ohms Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 813-SL70.0M-03