ES1AB thru ES1JB SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE - 50 TO 600 VOLTS CURRENT - 1.0 AMPERES SMB/DO-214AA .075(1.91) .083(2.11) .130(3.30) .155(3.94) .160(4.06) .185(4.70) .006(.152) .012(.305) .083(2.13) .096(2.44) .030(0.76) .050(1.27) .004(.102) .008(.203) .200(5.08) .220(5.59) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA For surface mount applications Low profile package Buit-in strain relief Easy pick and place Superfast recovery times for high efficiency Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction High temperature soldering 260oC/10seconds at terminals Pb free product are available 99% Sn above can meet RoHS Environment substance directive request Case JEDEC DO-214AA molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Indicated by cathode band Standard packaging 16mm tape (EIA-481) Weight 0.003 ounce, 0.093grams MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL ES1AB ES1JB UNITS 150 200 300 400 600 Volts 70 105 140 210 280 420 Volts 100 150 200 300 400 600 Volts ES1BB ES1CB ES1DB ES1EB ES1GB Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 Maximum Average Forward Rectified Current @ TL =1000C I(AV) 1.0 Amps Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneoue Forward Voltage at 1.0A VF Maximum DC Reverse Current @TJ=250C at Rated DC Blocking Voltage @TJ=1000C IR 5.0 100 Maximum Reverse Recovery Time (NOTE 1) TRR 35 Typical Junction Capacitance (NOTE 2) CJ 10 Typical Thermal Resistance (NOTE 3) R Operating and Storage Temperature Range TJ TSTG 50 0.95 1.25 34 JA -55 to +150 NOTES 1. Rverse Recovery Test Condibons IF=0.5A, I R=1.0A, l RR=0.25A 2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC 3. 8.0mm2 (.013mm thick) land areas www.paceleader.tw 100 1 1.7 Volts A nS pF 0 C/W 0 C ES1AB thru ES1JB SURFACE MOUNT SUPERFAST RECTIFIER RATING AND CHARACTERISTICS CURVES ES1AB THRU ES1JB Fig. 1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM ES1A THRU ES1G (+) 25 Vdc (approx) ( ) trr 10 Noninductive +0.5A ( ) D.U.T. 1 NONInductive AVERAGE FORWARD CURRENT, AMPERES 50 Noninductive Fig. 2 - MAXIMUM AVERAGE FORWARD CURRENT RATING 0 PULSE GENERATOR NOTE 2 -0.25 (+) OSCILLOSCOPE NOTE 1 -1.0 NOTES:1. Rise Time=7ns max. Input Impedance=1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance=50 Ohms. 1cm SET TIME BASE FOR 10ns/cm 1.0 25 50 75 100 125 150 175 Fig. 4 - TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 1000 IR-REVERSE LEAKAGE CURRENT, MICROAMPERES SINGLE PHASE HALF W AVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS LEAD TEMPERATURE, oC Fig. 3 - TYPICAL REVERSE CHARACTERISTICS 0 TJ=125C 100 0 TJ=75C 10 0 TJ=25C 1.0 ES1AB 1.0 ES1JB ES1EB 0.1 0 TJ=25C 0.01 0.001 0.1 20 40 60 80 10 0 0.2 120 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS % of PIV, VOLTS Fig. 6 - TYPICAL JUNCTION CAPACITANCE Fig. 5 - MAXIMUM NON-REPETITIVE SURGE CURRENT 30 14 25 12 0 JUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES 2.0 8.3ms SINGLE HALF SINCE-WAVE JEDEC METHOD 20 15 10 5 TJ=25C f=1.0MHZ Vslg=50mVp-p 10 8.0 6.0 4.0 2.0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz 0 0.1 1 10 REVERSE VOLTAGE, VOLTS www.paceleader.tw 2 100