ALUMINUM ELECTROLYTIC CAPACITORS HM Low Impedance series Lower impedance than HD,HC series. Adapted to the RoHS directive (2002/95/EC). HN Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan d Stability at Low Temperature Endurance Marking Radial Lead Type Sleeve (P.E.T.) HM Low Impedance Low Impedance HD Performance Characteristics Ñ40 ~ +105ûC 6.3 ~ 16V 330 ~ 12000µF ±20% (120Hz, 20ûC) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) 6.3 10 16 120Hz 20ûC tan d (MAX.) 0.22 0.19 0.16 6.3 10 16 Rated voltage (V) 120Hz 3 3 3 Impedance ratio ZT / Z20 (MAX.) ZÑ40ûC/Z+20ûC After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105ûC the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Capacitance change Within ±25% of initial value tan d 200% or less of initial specified value Leakage current lnitial specified value or less Printed with white color black sleeve. Type numbering system (Example : 6.3V 1800µF) fd 1 2 3 4 5 6 7 8 9 10 11 12 Size Code Configuration Capacitance tolerance (±20%) Rated Capacitance (1800µF) Rated voltage (6.3V) Series name Type P ± 0.5 fD+0.5 MAX. U HM 0 J 1 8 2 M P D Pressure relief vent L+1.5MAX. 15MIN 4MIN fD P fd Please refer to page 21 about the end seal configulation. 8 3.5 0.6 10 12.5 16 5.0 5.0 7.5 0.6 0.6 0.8 (mm) 18 7.5 0.8 Configuration fD 8 á 10 12.5 ~ 18 Pb-free leadwire Pb-free PET sleeve PD HD Standard ratings V (Code) Cap.(µF) Code Item 560 331 471 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 5600 6800 8200 12000 562 682 822 123 330 470 Case size fD ´ L (mm) 8 ´ 11.5 6.3 (0J) Impedance (m½) MAX. Rated ripple (mArms) 20ûC / 100kHz 105ûC / 100kHz 30 1140 8 ´ 11.5 8 ´ 15 10 ´ 12.5 8 ´ 11.5 30 28 25 30 1140 1490 1540 1140 8 ´ 15 10 ´ 12.5 8 ´ 20 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 20 8 ´ 20 10 ´ 16 10 ´ 20 10 ´ 25 12.5 ´ 20 10 ´ 20 12.5 ´ 25 28 25 16 18 19 16 13 16 18 13 12 11 13 10 1490 1540 1950 2000 2000 1950 2550 1950 2000 2550 2800 3000 2550 2900 16 ´ 25 18 ´ 25 9 8 3070 3250 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Case size fD ´ L (mm) 10 (1A) Impedance (m½) MAX. Rated ripple (mArms) 20ûC / 100kHz 105ûC / 100kHz Case size fD ´ L (mm) 8 ´ 11.5 8 ´ 11.5 10 ´ 12.5 16 (1C) Impedance (m½) MAX. Rated ripple 30 30 25 1140 1140 1540 25 28 18 18 1540 1490 1870 2000 (mArms) 20ûC / 100kHz 105ûC / 100kHz 8 ´ 11.5 30 1140 8 ´ 11.5 30 1140 10 ´ 12.5 25 1540 10 ´ 12.5 8 ´ 15 8 ´ 20 10 ´ 16 10 ´ 12.5 8 ´ 15 10 ´ 16 8 ´ 20 25 28 18 18 1540 1490 2000 1870 10 ´ 16 8 ´ 20 10 ´ 20 18 18 13 2000 1870 2550 10 ´ 16 8 ´ 20 18 18 2000 1870 10 ´ 20 13 2550 10 ´ 20 13 2550 10 ´ 25 12.5 ´ 20 12 11 2800 2800 10 ´ 25 12 2800 12.5 ´ 20 11 3000 12.5 ´ 25 10 2900 12.5 ´ 25 10 2900 16 ´ 25 9 3070 16 ´ 25 18 ´ 25 9 8 3070 3250 18 ´ 25 8 3250 : In this case, 6 will be put at 12th digit of typeWider numbering range system. of rating. : In this case, 3 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. CAT.8100V