TCLT11..Series Vishay Semiconductors Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package FEATURES • SMD low profile 5 pin package • Isolation test voltage 5000 VRMS • CTR flexibility available see order information 5 4 • Special construction 3 • Extra low coupling capacitance • Connected base • DC input with transistor output • Thickness turnout insulation ≥ 0.75 mm 1 • Creepage distance > 8 mm 2 17296 C V D E • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS DESCRIPTION • Switchmode power supplies The TCLT11.. series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 5-lead SOP-6L package. The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. • Computer peripheral interface • Microprocessor system interface AGENCY APPROVALS • UL1577, file no. E76222 system code W, double protection • CSA E76222 22.2 bulletin 5A • BSI IEC 60950 IEC 60065 • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending • FIMKO Note See the safety standard approval list "Agency Table" for more detailed information. ORDER INFORMATION PART TCLT1100 REMARKS CTR 50 to 600 %, SOP-6L5 TCLT1102 CTR 63 to 125 %, SOP-6L5 TCLT1103 CTR 100 to 200 %, SOP-6L5 TCLT1104 CTR 160 to 320 %, SOP-6L5 TCLT1105 CTR 50 to 150 %, SOP-6L5 TCLT1106 CTR 100 to 300 %, SOP-6L5 TCLT1107 CTR 80 to 160 %, SOP-6L5 TCLT1108 CTR 130 to 260 %, SOP-6L5 TCLT1109 CTR 200 to 400 %, SOP-6L5 Note Available only on tape and reel. Document Number: 83514 Rev. 2.1, 09-Jan-08 For technical questions, contact: [email protected] www.vishay.com 1 TCLT11..Series Vishay Semiconductors Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA IFSM 1.5 A Pdiss 100 mW Tj 125 °C Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V tP ≤ 10 µs Forward surge current Power dissipation Junction temperature OUTPUT Collector current IC 50 mA ICM 100 mA Pdiss 150 mW Tj 125 °C Isolation test voltage (RMS) VISO 5000 VRMS Total power dissipation Ptot 250 mW Operating ambient temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C Soldering temperature (2) Tsld 260 °C tP/T = 0.5, tP ≤ 10 ms Collector peak current Power dissipation Junction temperature COUPLER Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.6 UNIT INPUT Forward voltage IF = ± 50 mA VF 1.25 VR = 0 V, f = 1 MHz Cj 50 Collector emitter voltage IC = 1 mA VCEO 70 V Emitter collector voltage IE = 100 µA VECO 7 V VCE = 20 V, IF = 0 A, E = 0 ICEO Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat Cut-off frequency VCE = 5 V, IF = 10 mA, RL = 100 Ω fc 110 kHz f = 1 MHz Ck 0.3 pF Junction capacitance V pF OUTPUT Collector emitter cut-off current 10 100 nA 0.3 V COUPLER Coupling capacitance Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 83514 Rev. 2.1, 09-Jan-08 TCLT11..Series Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. VCE = 5 V, IF = 5 mA TCLT1100 CTR 50 600 % TCLT1102 CTR 63 125 % TCLT1103 CTR 100 200 % TCLT1104 CTR 160 320 % TCLT1102 CTR 22 45 % TCLT1103 CTR 34 70 % TCLT1104 CTR 56 100 TCLT1105 CTR 50 150 TCLT1106 CTR 100 300 % TCLT1107 CTR 80 160 % TCLT1108 CTR 130 260 % TCLT1109 CTR 200 400 % SYMBOL MIN. VCE = 5 V, IF = 10 mA IC/IF VCE = 5 V, IF = 1 mA VCE = 5 V, IF = 5 mA TYP. MAX. UNIT % % MAXIMUM SAFETY RATINGS PARAMETER TEST CONDITION TYP. MAX. UNIT IF 130 mA Pdiss 265 mW VIOTM 8 kV Tsi 150 °C INPUT Forward current OUTPUT Power dissipation COUPLER Rated impulse voltage Safety temperature Note According to DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending (see figure 1). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. INSULATION RATED PARAMETERS TEST CONDITION SYMBOL MIN. Partial discharge test voltage routine test PARAMETER 100 %, ttest = 1 s Vpd 2.0 Partial discharge test voltage lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) VIOTM 8 kV Vpd 1.68 kV VIO = 500 V RIO 1012 Ω VIO = 500 V, Tamb = 100 °C RIO 1011 Ω VIO = 500 V, Tamb = 150 °C (construction test only) RIO 109 Ω Insulation resistance Document Number: 83514 Rev. 2.1, 09-Jan-08 TYP. For technical questions, contact: [email protected] MAX. UNIT kV www.vishay.com 3 TCLT11..Series Vishay Semiconductors Optocoupler, Phototransistor Output, Ptot - Total Power Dissipation (mW) SOP-6L5, Half Pitch, Long Mini-Flat Package VIOTM 300 t1, t2 t3 , t4 ttest tstres Phototransistor Psi (mW) 250 200 = 1 to 10 s =1s = 10 s = 12 s VPd 150 VIOWM VIORM 100 IR-Diode Isi (mA) 50 0 0 0 25 50 75 100 125 150 13930 Tsi - Safety Temperature (°C) 94 9182 Fig. 1 - Derating Diagram t3 ttest t4 tTr = 60 s t1 t2 t stres t Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-2(VDE 0884)/DIN EN 60747-; IEC 60747 SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) td 3.0 µs Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) tr 3.0 µs Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) ton 6.0 µs Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) ts 0.3 µs Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) tf 4.7 µs Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 3) toff 5.0 µs Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) ton 9.0 µs Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) toff 10.0 µs IF TYP. MAX. UNIT +5V IF 0 IC = 2 mA; adjusted through input amplitude RG = 50 tp = 0.01 T tp = 50 µs Channel I Channel II 50 MIN. Oscilloscope RL = 1 M CL = 20 pF IF IF = 10 mA 0 +5V IC R G = 50 Ω tp = 0.01 T t p = 50 µs Channel I Channel II 100 50 Ω 1 kΩ Oscilloscope R L ≥ 1 MΩ C L ≤ 20 pF 95 10843 95 10804 Fig. 3 - Test Circuit, Non-Saturated Operation www.vishay.com 4 Fig. 4 - Test Circuit, Saturated Operation For technical questions, contact: [email protected] Document Number: 83514 Rev. 2.1, 09-Jan-08 TCLT11..Series Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package Vishay Semiconductors IF 0 IC tp t 100 % 90 % 10 % 0 tp td tr t on (= t d + tr) tr td t on ts Pulse Duration Delay Time Rise Time Turn-on Time ts tf t off (= ts + tf) t tf t off Storage Time Fall Time Turn-off Time 96 11698 Fig. 5 - Switching Times TYPICAL CHARACTERISTICS 300 Coupled device 250 200 Phototransistor 150 IR-diode 100 50 0 0 96 11700 40 80 120 Tamb - Ambient Temperature (°C) CTRrel - Relative Current Transfer Ratio Ptot - Total Power Dissipation (mW) Tamb = 25 °C, unless otherwise specified VCE = 5 V IF = 5 mA 1.5 1.0 0.5 0 - 25 25 50 75 Fig. 8 - Relative Current Transfer Ratio vs. Ambient Temperature 1000 ICEO - Collector Dark Current, with Open Base (nA) 10000 100 10 1 VCE = 20 V IF = 0 1000 100 10 1 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 96 11862 0 Tamb - Ambient Temperature (°C) 95 11025 Fig. 6 - Total Power Dissipation vs. Ambient Temperature IF - Forward Current (mA) 2.0 VF - Forward Voltage (V) Fig. 7 - Forward Current vs. Forward Voltage Document Number: 83514 Rev. 2.1, 09-Jan-08 0 95 11026 25 50 100 75 Tamb - Ambient Temperature (°C) Fig. 9 - Collector Dark Current vs. Ambient Temperature For technical questions, contact: [email protected] www.vishay.com 5 TCLT11..Series Vishay Semiconductors Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package IC - Collector Current (mA) VCE = 5 V 10 1 0.1 0.01 0.1 1 20 mA IF = 50 mA 10 mA 10 5 mA 2 mA 1 1 mA 0.1 95 10985 VCE - Collector Emitter Voltage (V) VCEsat - Collector Emitter Saturation Voltage (V) 20 % used 0.8 CTR = 50 % used 0.6 0.4 0.2 10 % used 0 IC - Collector Current (mA) Fig. 12 - Collector Emitter Saturation Voltage vs. Collector Current www.vishay.com 6 100 10 10 8 Non-Saturated Operation VS = 5 V RL = 100 Ω ton 6 toff 4 2 0 0 2 4 8 6 IC - Collector Current (mA) 95 11030 Fig. 14 - Turn-on/off Time vs. Collector Current 50 Saturated Operation VS = 5 V RL = 1 kΩ 40 30 toff 20 10 ton 0 0 100 10 1 IF - Forward Current (mA) Fig. 13 - Current Transfer Ratio vs. Forward Current ton/toff - Turn-on/Turn-off Time (µs) 1.0 1 1 0.1 100 10 Fig. 11 - Collector Current vs. Collector Emitter Voltage 95 11028 10 ton/toff- Turn-on /Turn-off Time (µs) IC - Collector Current (mA) 100 1 100 95 11029 Fig. 10 - Collector Current vs. Forward Current 0.1 VCE = 5 V 100 10 IF - Forward Current (mA) 95 11027 1000 CTR - Current Transfer Ratio (%) 100 95 11031 5 10 15 20 IF - Forward Current (mA) Fig. 15 - Turn-on/off Time vs. Forward Current For technical questions, contact: [email protected] Document Number: 83514 Rev. 2.1, 09-Jan-08 TCLT11..Series Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches) 4.1 max. 10.2 + 0.3 - 0.4 3.8 + 0.3 - 0.4 2.54 nom. 1 Possible footprint Possible footprint 1.27 (0.05) 3 8.2 (0.325) 0.9 (0.035) 4 2.54 (0.1) 1.27 nom. 5 + 0.10 - 0.05 0.7 0.15 0.45 ± 0.1 2.54 (0.1) 2 0.1 ± 0.1 2.3 max. 7.5 ± 0.2 10.8 (0.425) 2 Pin no. 1 identification technical drawings according to DIN specifications Document Number: 83514 Rev. 2.1, 09-Jan-08 For technical questions, contact: [email protected] 15227 www.vishay.com 7 TCLT11..Series Vishay Semiconductors Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 8 For technical questions, contact: [email protected] Document Number: 83514 Rev. 2.1, 09-Jan-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1