WWW.PHIHONG.COM 5W Automobile Charger CLA05D Features • • Improved Stretch Life of DC Coil Cord Power-On LED Indicator • • Reverse Polarity Protection Input Over Voltage Protection • • UL C-Tick • • Height: 38.20mm (1.5in) Weight: 81.7g (2.88oz) Applications • Portable and Mobile Devices Safety Approvals • • E-Mark CE Mechanical Characteristics • • Length: 89.73mm (3.5in) Width: 30.48mm (1.2in) Output Specifications Load Model DC Output Voltage Min. Ripple (1) Max. P-P (max) Regulation Line Load 4.75V~5.25V CLA05D-050A 5V 0A 1.0A 100mV (1) The ripple was measure by using a 12 inch twisted pair terminated with a 10uF capacitor and a 0.1uF ceramic in parallel Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the Factory and visit www.phihong.com for the most up-to-date specifications. CLA Characteristics INPUT: Environmental: DC Input Voltage Range Operating Temperature 10 to 30VDC (12V nominal) -20°C to 60°C DC Input Current Storage Temperature ≤ 20mA @ No load (@ 12.0VDC) ≤ 0.65A @ 1.0A load (@ 10.0VDC) ≤ 0.27A @ 1.0A load (@ 30.0VDC) Efficiency 75% Min at Max. Load & 12.0VDC @ 25°C OUTPUT: Output Overvoltage Protection 9.5VDC +/-1% maximum by zener clamping. Output Short Circuit Protection Current limiting without damage to unit. The output current shall not exceed 2.5A max. Dimension Diagram Unit: mm (inch) WWW.PHIHONG.COM -40°C to 85°C Humidity Operation 0 to 95% RH Storage 0 to 95% RH General: MTBF 100K hours min. @ full load 25°C ambient temperature DC Output Connector 2.1 x 5.5 x 9.0mm Center Positive Standard