Three Phase AC Controller Modules PSUT 145 IRMS VRRM = 3 x 145A = 800-1600 V Preliminary Data Sheet VRSM VDSM 900 1300 1500 1700 VRRM VDRM 800 1200 1400 1600 Type PSUT 145/08 PSUT 145/12 PSUT 145/14 PSUT 145/16 Symbol Test Conditions IRMS TC = 85 °C TC = 75 °C TVJ=TVJM ITAVM ITSM ∫ i2 dt Maximum Ratings 145 170 120 A A A TVJ = 25°C t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1370 A A TVJ = TVJM t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1050 1150 A A TVJ = 25°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 7800 9380 A2 s A2 s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4575 5480 A2 s A2 s 120 A/µs 1000 V/µs 10 5 0.5 W W W 10 -40 ... + 125 125 -40 ... + 130 V °C °C °C 3000 3600 V∼ V∼ 6 6 Nm Nm 290 g (di/dt)cr TVJ = TJVM f = 50Hz IG = 0.6 A diG/dt = 0.6 A/µs (dv/dt)cr TVJ = TVJM VDR = 0.67 VDRM RGK = ∞, method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = TVJM IT = ITAVM 50/60 HZ, RMS IISOL ≤ 1 mA tP = 30µs tP = 300µs t = 1 min t=1s Md Mounting torque Terminal connection torque Weight typ. POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 M6 M6 Features • Thyristor controller for AC (circuit • • • • W3C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ Planar glasspassivated chips Package with metal base plate UL registered E 148688 Applications • Switching and control of three phase AC circuits • Light and temperature control • Softstart AC motor controller • Solid state switches Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • High power density 2005 POWERSEM reserves the right to change limits, test conditions and dimensions PSUT 145 Symbol Test Conditions ID, IR VT VTO rT VGT IGT VGD IGD IL TVJ = TVJM, VR = VRRM, VD = VDRM ≤ 10 mA IT = 200A, TVJ = TVJM For power-loss calculations only (TVJ = TVJM) ≤ 1.87 0.95 3.2 V V mΩ VD = 6V VD = 6V TVJ = 25°C TVJ = 25°C ≤ ≤ 2.5 150 V mA TVJ = TVJM TVJ = TVJM VD = 0,5 VDRM VD = 6 V ≤ ≤ 0.2 5 V mA TVJ = 25°C, tP = 10µs IG = 0.6A, diG/dt = 0.6A/µs ≤ 600 mA IH tgd TVJ = 25°C, VD = 6V, RA = 5Ω TVJ = 25°C, IG = 0.6A, diG/dt = 0.6A/µs ≤ ≤ 200 1.2 mA tq TVJ = TVJM, IT = 50A, tP = 200µs, VR = 100V -di/dt = 10A/µs, dv/dt = 20V/µs, VD = 2/3 VDRM 190 µs RthJC per thyristor; sine 180°el per module; sine 180° el 0.42 0.07 K/W K/W RthJK per thyristor per module 0.62 0.11 K/W K/W dS a Creeping distance on surface Max. allowable acceleration 12.5 50 mm m/s2 5 R100= 493Ω max. 20 kΩ Temperture sensor Rated resistance, R25 P25 Power dissipation, Characteristic Value Tc = 25 °C Tc = 25 °C POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 µs mW 2005 POWERSEM reserves the right to change limits, test conditions and dimensions PSUT 145 POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions