Subassembly Single Phase AC Controller Subassemblies PSW1C142 IRMS = 130 A VRRM= 800-1800 V Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 1900 VRRM VDRM (V) 800 1200 1400 1600 1800 Type PSW1C 142/08 PSW1C 142/12 PSW1C 142/14 PSW1C 142/16 PSW1C 142/18 Symbol Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C; 50-400 Hz (per single controller) ∫ i2 dt (di/dt)cr Maximum Ratings 130 A 90 A 58 A TC = 85 °C; 180° sine, per thyristor TVJ = 45 °C t = 10 ms (50 Hz), sine 1150 A VR = 0 t = 8.3 ms (60 Hz), sine 1230 A TVJ = 125 °C t = 10 ms (50 Hz), sine 1000 A Features • • • Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • VR = 0 t = 8.3 ms (60 Hz), sine 1070 A TVJ = 45 °C t = 10 ms (50 Hz), sine 6600 A²s VR = 0 t = 8.3 ms (60 Hz), sine 6280 A²s Advantages TVJ = 125 °C t = 10 ms (50 Hz), sine 5000 A²s VR = 0 4750 A²s 150 A/µs • • t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 60 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.45 A non repetitive,IT = ITAVM 500 A/µs 1000 V/µs • • Solid state relays Space and weight savings Improved temperature and power cycling capability High power density Small and light weight diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg Weight TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W 0.5 W typ. tP=300µs 10 V -40... + 150 150 °C °C -40... + 125 8 °C g Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 Subassembly Symbol Test Conditions ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ 5 mA IT = 200 A, ≤ 1.75 V VD=6V TVJ= 25°C ≤ TVJ=-40°C ≤ 1.6 V IGT VD=6V TVJ= 25°C ≤ 100 mA TVJ=-40°C ≤ 200 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs 0.7 0.35 50 K/W K/W m/s² VGD IGD IL Characteristic Value TVJ = 25 °C For power-loss calculations only TVJ= 25°C, tP=10µs 0.85 V 5.2 mΩ 1.5 V IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs RthJC a per thyristor; DC per module Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20