05091 PSLC03 thru PSLC24C Only One Name Means ProTek’Tion™ LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ Ethernet - 10/100 Base T ✔ Cellular Phones ✔ Audio & Video Inputs ✔ FireWire, SCSI & USB Interfaces IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SOT-143 FEATURES ✔ 350 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ Available in Multiple Voltage Types Ranging From 3V to 24V ✔ Protects One Line ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ LOW CAPACITANCE: 10pF MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-143 Package ✔ Weight 10 milligrams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATIONS UNIDIRECTIONAL 05091.R5 8/03 BIDIRECTIONAL 1 4 1 4 2 3 2 3 1 www.protekdevices.com PSLC03 thru PSLC24C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 350 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Notes 1-2) DEVICE MARKING 3U 3B 5U 5B 8U 8B 12U 12B 15U 15B 24U 24B PSLC03 PSLC03C PSLC05 PSLC05C PSLC08 PSLC08C PSLC12 PSLC12C PSLC15 PSLC15C PSLC24 PSLC24C RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 5A VC VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.6 16.6 26.7 26.7 9.0 9.0 11.0 11.0 16.6 16.6 24.0 24.0 30.0 30.0 N/A N/A MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @8/20µs VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 19.0V @ 20.0A 19.0V @ 20.0A 18.3V @ 17.0A 18.3V @ 17.0A 18.5V @ 17.0A 18.5V @ 17.0A 28.6V @ 11.0A 28.6V @ 11.0A 31.8V @ 10.0A 31.8V @ 10.0A 56.0V @ 6.0A 56.0V @ 6.0A 125 125 20 20 10 10 1 1 1 1 1 1 10 10 10 10 10 10 10 10 10 10 10 10 Note 1: Part numbers with an additional “C” suffix are bidirectional devices, i.e., PSLC05C. Note 2: Unidirectional Only: Positive potential is applied from pin 2 to 1 or pin 3 to 4. 1,000 350W 8/20µs Waveform 100 10 0.1 05091.R5 8/03 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Power - Watts 10,000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com PSLC03 thru PSLC24C GRAPHS FIGURE 3 POWER DERATING CURVE 100 40 Peak Pulse Power 8/20µs 5 Volts per Division 80 % Of Rated Power FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSLC03 60 40 30 20 10 20 0 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) FIGURE 5 INSERTION LOSS - PSLC05 FIGURE 6 RETURN LOSS - PSLC05 20 db 10 db per Division 10 db per Division 20 db Ref 0 db -20 db -20 db -50 db -50 db 100 MHz per Division 05091.R5 8/03 Ref 0 db 100 MHz per Division 3 www.protekdevices.com PSLC03 thru PSLC24C APPLICATION NOTE The PSLC Series are TVS arrays designed to protect I/O or data lines from the damaging effects of ESD and EFT. This product series provides both unidirectional and bidirectional protection, with a surge capability of 350 Watts PPP per line for an 8/20µs waveform and ESD protection > 40kV. UNIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 1) The two PSLC Series devices provide protection in a common-mode configuration as depicted in Figure 1. Figure 1 - Unidirectional Configuration (Two TVS Devices) Common-Mode USB Protection ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; 1 4 1 4 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Circuit connectivity is as follows: ✔ TVS Device 1: Line 1(D+) is connected to Pins 2 & 3. ✔ TVS Device 2: Line 2(D-) is connected to Pins 2 & 3. ✔ Both TVS Devices: Pins 1 & 4 connected to ground. GND SOLDER PAD USB OUTPUT CONNECTOR 2 3 2 3 USB IC D+ D- BIDIRECTIONAL DIFFERENTIAL-MODE CONFIGURATION (Figure 2) The PSLCxxC Series provides protection in a differential-mode configuration as depicted in Figure 2. Circuit connectivity is as follows: ✔ Line 1(RX) is connected to Pins 1 & 4. ✔ Line 2(TX) is connected to Pins 2 & 3. ✔ The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. ✔ The path length between the TVS device and the protected line should be minimized. ✔ All conductive loops including power and ground loops should be minimized. ✔ The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. ✔ Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. RX R 1 4 2 3 RJ-45 Circuit board layout is critical for Electromagnetic Compatibility (EMC) protection. The following guidelines are recommended: ETHERNET TRANSCEIVER CIRCUIT BOARD LAYOUT RECOMMENDATIONS Figure 2 - Bidirectional Configuration Differential-Mode Ethernet Protection R TX 05091.R5 8/03 4 www.protekdevices.com PSLC03 thru PSLC24C PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-143 A L G B J S PACKAGE DIMENSIONS DIM K F A B C D F G H J K L R S D H C R MOUNTING PAD TYPICAL Inches 1 2 3 4 5 6 7 8 9 10 11 0.112 0.079 0.071 0.075 0.041 0.108 0.047 0.031 0.033 0.033 0.033 2.85 2.00 1.80 1.90 1.05 2.75 1.20 0.80 0.85 0.85 0.85 6 5 3 11 8 0.0120 0.055 0.045 0.020 0.037 0.080 0.004 0.006 0.024 0.024 0.033 0.098 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PSLC05-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., PSLC05-T13. 9 Outline & Dimensions: Rev 1 - 11/01, 06011 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05091.R5 8/03 0.110 0.047 0.033 0.015 0.031 0.070 0.0005 0.003 0.018 0.0175 0.028 0.083 TAPE & REEL ORDERING NOMENCLATURE 10 7 3.04 1.39 1.14 0.50 0.93 2.03 0.10 0.15 0.60 0.60 0.83 2.48 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 2 4 2.80 1.20 0.84 0.39 0.79 1.78 0.013 0.08 0.46 0.445 0.72 2.11 INCHES MIN MAX NOTES 1 DIM Millimeters MILLIMETERS MIN MAX 5 www.protekdevices.com