10 AMPERES COMPLEMENTARY SILICON POWER TRANSISTORS 60,80 VOLTS NPN D44H SERIES PNP D45H SERIES FEATURES * ...for general purpose power amplification and switching such as output or driver stages in applications such as switching regulators, converter and power ampifiers. * Low Collector-Emitter Saturation Voltage VCE(sat) = 1.0 V (max.) @8.0A * Fast Switching Speeds * Complementary Pairs Simplifies Designs TO-220AB .190 (4.82) .147 (3.73) .142 (3.61) .405 (10.28) .120 (3.04) .100 (2.54) .380 (9.66) .160 (4.07) .055 (1.39) .045 (1.15) 4 .255 (6.47) .235 (5.97) .620 (15.75) .570 (14.48) .050 (1.27) .000 (0.00) 1 2 3 .045 (1.15) min. .155 (3.93) .110 (2.80) .562 (14.27) .060 (1.52) .045 (1.15) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS O Ratings at 25 C ambient temperature unless otherwise specified. .500 (12.70) .035 (0.88) .025 (0.64) .105 (2.66) .095 (2.42) .025 (0.64) .018 (0.46) .210 (5.33) .190 (4.83) 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR .110 (2.79) .080 (2.04) Dimensions in inches and (millimeters) MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted ) RATINGS Collector-Emitter voltage SYMBOL VCEO D44H or D45H 8 10, 11 60 80 UNITS V VEB 5 V Collector current-Continutious -Peak (Note 1) IC 10 20 A Collector Power dissipation @TC=25OC @TA=25OC Pd 5.0 1.67 W Emitter-Base voltage Thermal Resistance Lead Temperature for Soldering Purposes: 1/8" from case for 5 sec. Operating and Storage Junction Temperature Range Notes: 1. Pulse Width < 6.0mS, Duty Cycle < 50% 2. "Fully RoHS Compliant", "100% Sn Plating (Pb-free)". RqJA 75 RqJC 2.5 TL 260 o C TJ, Tstg -55 to +150 o C o C/W VD 2007-11 ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS Collector cutoff current (VCE= Rated VCEO,VBE= 0) Emitter cutoff current (VEB= 5Vdc) SYMBOL MIN TYP MAX UNITS ICES - - 10 uA IEBO DC current gain (VCE= 1.0V,IC= 2.0Adc) DC current gain (VCE= 1.0V,IC= 4.0Adc) Collector-emitter saturation voltage (IC= 8.0Adc,IB= 0.4Adc) (IC= 8.0Adc,IB= 0.8Adc) D44H10,D45H10 D44H8,11 D45H8,11 D44H10,D45H10 D44H8,11 D45H8,11 D44H/D45H8,11 D44H/D45H10 D44H Series D45H Series Gain Bandwidth Product (IC= 0.5Adc, VCE= 10Vdc, f=20 MHz) D44H Series D45H Series Delay and Rise Times (IC= 5.0Adc, IB1= 0.5Adc) D44H Series D45H Series Storage Time (IC= 5.0Adc, IB1=IB2= 0.5Adc) D44H Series D45H Series Fall Time (IC= 5.0Adc, IB1=IB2= 0.5Adc) hFE VCE(sat) VBE(sat) Base-emitter saturation voltage (IC= 8.0Adc,IB= 0.8Adc) Collector Capacitance (VCB= 10V, ftest= 1.0 MHz) hFE D44H Series D45H Series Ccb fT td + tr ts tf - - 100 uA 35 - - - 60 - - - 20 - - - 40 - - - - - 1.0 V - - 1.0 V - - 1.5 V - 130 - pF - 230 - pF - 50 - MHz - 40 - MHz - 300 - nS - 135 - nS - 500 - nS - 500 - nS - 140 - nS - 100 - nS VD 2007-11 RATING AND CHARACTERISTICS CURVES (D44H and D45H Series) IC, COLLECTOR CURRENT, (A) 200 100 TJ=150OC 50 1mS 20 10 100uS 5.0 2.0 1.0 10uS TC < 70OC DUTY CYCLE < 50% 0.5 0.2 1.0 DC 1.0uS D44H/45H8 D44H/45H10,11 2.0 3.0 5.0 7.0 10 20 30 50 VCE, COLLECTOR-EMITTER VOLTAGE, (V) 70 100 Figure Maximum Rated Forward Bias Safe Operating Area DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.