T6ARS3505M THRU T6ARS3507M TRANSIENT VOLTAGE SUPPRESSORS GPP BRIDGE RECTIFIER VOLTAGE RANGE 600 to 1000 Volts CURRENT 35 Amperes FEATURES Low leakage Low forward voltage Surge overload rating : 300 amperes peak Mounting position: Any Ideal for printed circuit boards High forward surge current capability RS-35M .189 (4.8) .173 (4.4) MECHANICAL DATA .165 (4.2) .150 (3.8) .106 (2.7) .096 (2.3) .087 (2.2) .071 (1.8) .441 (11.2) .425 (10.8) .197 (5) .800 (20.3) .697 (17.7) * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory,file #E94233 f .138 (3.5) .126 (3.2) .150 (3.8) .134 (3.4) 1.193 (30.3) 1.169 (29.7) .708 (18.0) .669 (17.0) * * * * * * .114 (2.9) .098 (2.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .043 (1.1) .035 (0.9) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .031 (0.8) .023 (0.6) .402 (10.2) .303 (7.7) .303 (7.7) .386 (9.8) .287 (7.3) .287 (7.3) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL T6ARS3505M T6ARS3507M UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 600 800 1000 Volts Maximum RMS Voltage VRMS 420 560 700 Volts VDC 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T C = 55 o C (With Heat-sink) IO T6ARS3506M Volts 35 Amps Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 300 Peak Power Dissipation at T A =25 OC,T P =1mS (Note 1) PPPM Maximum 600 Breakdown Voltage Range at I T =1mA VBR 380 ~ 420 Volts Maximum Peak Pulse Current IPPM 1.1 Amps Volts Maximum Clamping Voltage at IPPM =1.1A VC 548 Operating and Storage Temperature Range T J, T STG -55 to + 150 Watts 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 17.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C T6ARS3505M SYMBOL VF T6ARS3506M 1.1 T6ARS3507M UNITS Volts 5.0 IR 200 NOTES : 1. Non-repetitive current pulse, per Fig.8 and derated above TA=25 C per Fig.7. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". O uAmps 2007-7 60 10 50 POWER DISSIPATION, (W) 30 20 TC= 150OC (TYP) 5 TC= 25OC (TYP) 2 1 0.5 0.2 0.2 0.4 0.6 0.8 1 1.2 1.4 30 20 10 0 4 12 16 20 AVERAGE RECTIFIED FORWARD CURRENT, (A) FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS FIG.2 POWER DISSIPATION 24 4 sine wave 0 8.3ms 8.3ms 200 1 cycle non-repetitive Tj=25 100 0 1 2 5 10 20 50 3 P.C.B 1 0 100 on glass-epoxi substrate 2 soldering land 5mmf sine wave R-load free in air 0 40 NUMBER OF CYCLE 120 160 FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 50 THERMAL RESISTANCE (OC/W) 1.2 40 30 heatsink Tc Tc 20 10 0 10 80 AMBIENT TEMPERATURE, (OC) FIG.3 SURGE FORWARD CURRENT CAPABILITY AVERAGE FORWARD CURRENT, (A) 8 INSTANTANEOUS FORWARD VOLTAGE, (V) 300 0 sine wave TJ = 150 OC 40 0 1.6 AVERAGE FORWARD CURRENT, (A) 0 Pulse test per one diode IFSM PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( T6ARS3505M THRU T6ARS3507M ) sine wave R-load on heatsink 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG.5 TYPICAL FORWARD CURRENT DERATING CURVE 170 with thermal compound 1.0 0.8 0.6 0.4 0.2 0 2 3 4 5 6 7 MOUNTING TORQUE (kg.cm) FIG.6 CONTACT THERMAL RESISTANCE fcf 8 RATING AND CHARACTERISTICS CURVES ( T6ARS3505M THRU T6ARS3507M ) 100 10 1.0 0.1 0.1u 1.0u 10u 100u 1m 75 50 25 0 0 10u 75 100 125 150 175 FIG.7 PEAK PULSE POWER RATING CURVE FIG.8 PULSE DERATING CURVE 100000 Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM Peak Value IPPM 100 HALF VALUE - IPPM 2 10/1000usec. Waveform as Defined by R.E.A. 50 1.0 2.0 3.0 1000 4.0 200 f = 1MHz Vsig = 50mVp-p TJ= 25 OC 10000 td 0 50 AMBIENT TEMPERATURE, (OC) tr = 10usec. 0 25 PULSE WIDTH,(S) 150 PEAK PULSE CURRENT, (%) PEAK PULSE POWER OR CURRETN DERATING IN PERCENTAGE, (%) Non-Repetitive Pulse Waveform Shown in Fig.9 TA=25OC CJ, CAPACITANCE, (pF) PEAK PULSE POWER, (KW) 100 100 1.0 Measured at Zero Bias Measured at Stand off Voltage,VWM 10 100 200 V(BR), BREAKDOWN VOLTAGE, (V) TIME, (mS) FIG.10 TYPICAL JUNCTION CAPACITANCE FIG.9 PULSE WAVEFORM Schematic DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.