TEMPERATURE COMPENSATING THERMISTORS SS Series: Probes FEATURES • High stability, HighAccuracy, and High Reliability • Resistance Values from 1KW to 200KW ± 1~5% • B-Constant 25/85 from 3000 to 4500 ± 1~3% CHARACTERISTICS Ni Plated SS113 PVC/Teflone Wire AWG28-24 Epoxy Resin f8 Surface Temperature Sensor -40 to +125°C Operating Temp. Range I* f 3.6 Connector 19 SS113 Epoxy Resin Brass f 4.3 II* SS113 Connector Brass Epoxy Resin f 5.3 PVC/Teflone Wire AWG26-24 f 4.3 IV* Epoxy Resin PVC/Teflone Wire AWG26-24 8 Connector 21.5 Approx. 2.5 mW/°C (Still air) Approx. 17 sec. (Thermal bath) Surface Temperature Sensor Connector Tin Plated Copper Dissipation Constant Response Time Operating Temp. Range 8 18.8 SS113 Operating Temp. Range 8 III* Approx. 2.5 mW/°C (Still air) Approx. 17 sec. (Thermal bath) Surface Temperature Sensor -40 to +125°C PVC/Teflone Wire AWG26-24 18.8 Dissipation Constant Response Time Dissipation Constant -40 to +125°C Approx. 2.3 mW/°C (Still air) Response Time Approx. 17 sec. (Thermal bath) Surface Temperature Sensor -30 to +125°C Operating Temp. Range Approx. 2.5 mW/°C (Still air) Dissipation Constant Approx. 17 sec. (Thermal bath) Response Time Teflon Tube Clip SS601 Home Baker Sensor Operating Temp. Range Thermistor Teflon Wire Thermistor Protecting Tube (SUS) SS101 Heat Resisting Tube (Silicone Rubber) f4 Response Time Approx. 12 sec. (Thermal bath) Operating Temp. Range Dissipation Constant I* Connector 25±0.5 Approx. 80 sec. (Thermal bath) Heat Exchanger / Air Conditioner Sensor Operating Temp. Range -40 to +105°C Approx. 2.3 mW/°C (Still air) Dissipation Constant Response Time SS123 Operating Temp. Range II* Connector 25±0.5 SS123 Operating Temp. Range Connector 25±0.5 f 3.9 f 2.0 M6 SS1C3 7 25±0.5 Brass Screw 8 13 Flexible Epoxy Resin Operating Temp. Range Connector Silicon Resin Dissipation Constant -40 to +100°C Approx. 2.5 mW/°C (Still air) Response Time Approx. 40 sec. (Thermal bath) Hot Water Heater Temperature Sensor / Quick Temperature Response PVC TefloneWire AWG28-26 f 7.0 Stainless Steel Pipe -40 to +105°C Approx. 2.5 mW/°C (Still air) Approx. 40 sec. (Thermal bath) Refrigerator Sensor Operating Temp. Range Connector 25±0.5 SS1A3 Dissipation Constant Response Time PVC Wire AWG26-22 ABS Pipe f 6.8 -40 to +105°C Approx. 2.5 mW/°C (Still air) Approx. 34 sec. (Thermal bath) Heat Exchanger / Air Conditioner Sensor III* SS143 Dissipation Constant Response Time PVC Wire AWG26 Brass Pipe (Ni Plated) f6 Approx. 26 sec. (Thermal bath) Heat Exchanger / Air Conditioner Sensor PVC Wire AWG26 Brass Pipe (Ni Plated) f5 -20 to +260°C Approx. 4 mW/°C (Still air) Response Time PVC Wire AWG28 Brass Pipe (Ni Plated) f4 -20 to +180°C Approx. 3 mW/°C (Still air) Microwave Oven Sensor Wires (Glass Wool) SS123 Dissipation Constant Dissipation Constant -40 to +125°C Approx. 4 mW/°C (Still air) Response Time Approx. 0.8 sec. (Thermal bath) Heater / Piping Temperature Sensor PVC TefloneWire AWG28-26 Operating Temp. Range Connector Dissipation Constant -40 to +200°C Approx. 3 mW/°C (Still air) Response Time Approx. 16 sec. (Thermal bath) * The Roman Numerals listed above are only used to differentiate dimensions. * Connectors are optional. (*1) * Sensor and Wire Length can be customized. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C6A05 REV 2004.11.15