RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ ■ ■ ■ Änderungen vorbehalten / subject to change without notice QP-320 320W Quad Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature CH1 & CH2 can be adjusted from -5% ~ +10% With power good and fail signal output Built-in remote sense function for CH1 & CH2 LED indicator for power on 100% full load burn-in test 20A peak load capability for 24V channel 3 years warranty .. SPECIFICATION MODEL OUTPUT QP-320D QP-320F OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 DC VOLTAGE 5V 12V 24V -12V 5V 15V 24V -15V RATED CURRENT 20A 10A 3A 2A 20A 8A 3A 1.6A CURRENT RANGE 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 2A 2.5 ~ 20A 0 ~ 10A 0.2 ~ 5A 0.2 ~ 1.6A PEAK CURRENT 20A 10A 20A, 1ms(Note5) 2A 20A 10A 20A, 1ms(Note5) 1.6A RATED POWER 316W 150mVp-p 150mVp-p 100mVp-p 150mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE CH1,2:+10,-5% VOLTAGE TOLERANCE Note.3 3.0% 3.0% 150mVp-p +10,-6% 10% 3.0% 3.0% +10,-6% 10% LINE REGULATION 1.0% 2.0% 2.0% 3.0% 1.0% 2.0% 2.0% 3.0% LOAD REGULATION 2.0% 3.0% 6.0% 8.0% 2.0% 3.0% 6.0% 8.0% SETUP, RISE TIME INPUT 150mVp-p CH4 800ms, 50ms at full load HOLD UP TIME (Typ.) 16ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 83% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 4A/115VAC 25A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE 127 ~ 370VDC PF>0.98/115VAC at full load 2A/230VAC 45A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Fold back current limiting, recovers automatically after fault condition is removed CH1:5.75 ~ 6.75V CH2:13.8 ~ 16.2V CH1:5.75 ~ 6.75V CH2:17.25 ~ 20.25V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1 )Detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down POWER GOOD / POWER FAIL 10ms/1ms -10 ~ +70 (Refer to output load derating curve) WORKING TEMP. OVER TEMPERATURE FUNCTION WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 213.5K hrs min. MIL-HDBK-217F (25 ) 215*115*50mm (L*W*H) 1.2Kg; 12pcs/15.4Kg/0.92CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Every output channel can provide up to the maximum current, but total load can't exceed the rated output power. 5. CH3(24V) peak current 20A, 1ms, repeatable in every 100ms. CH3(24V) output must be above 16V in the period of peak current. File Name:QP-320-SPEC 2006-01-16 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ■ ■ ELECTRONIC COMPONENTS ■ ■ Änderungen vorbehalten / subject to change without notice QP-320 320W Quad Output with PFC Function Mechanical Specification Case No. 912I series Unit:mm 117.5 32.5 150 27.5 177.5 19 LED 6 V2 V1 ADJ. 1 36.7 CN2 9 8 50 6 115 95 9.5 7 5 4-M4 L=5mm 36.5 37.5 6-M3 L=3mm 2 32.5 8 3 10 1 50.5 4 215 150 Air flow direction 50 25 32.5 4-M4 L=5mm Terminal pin number assignment : Pin No. 1 2 3 Assignment AC/L AC/N FG DC Output Connector (CN2) : JST S6B-XH-A-1 or equivalent Pin No. Assignment Pin No. Assignment 4 DC OUTPUT V4 7,8 DC OUTPUT COM 5 DC OUTPUT V3 9 DC OUTPUT V2 6 DC OUTPUT V1 Derating Curve Pin No. Assignment Pin No. Assignment 1 V1(+S) 4 V2(-S) 2 V1(-S) 5 PF/PG 3 V2(+S) 6 GND Mating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent Output Derating VS Input Voltage 100 100 90 80 80 70 LOAD(%) LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 ) 60 70 (HORIZONTAL) 60 50 40 90 105 115 135 155 230 264 INPUT VOLTAGE (VAC) 60Hz File Name:QP-320-SPEC 2006-01-16