KSB130 002AR KSB13002AR ◎ SEMIHOW REV.A1,May 2008 KSB130 002AR KSB13002AR High Voltage Switch Mode Application • High Voltage, High Speed Switching • Suitable for Switching regulator, Inverters motor controls Max Operating temperature • 150℃ Max. • 8KV ESD proof at HBM (C=100㎊, R=1.5㏀) Absolute Maximum Ratings TC=25℃ unless otherwise noted CHARACTERISTICS SYMBOL RATING UNIT VCBO VCES VCEO VEBO IC PC TSTG TJ 700 700 400 9 0.8 1.0 -65~150 150 V V V V A W ℃ ℃ Collector-Base Voltage Collector-Emitter Voltage Collector Emitter Voltage Collector-Emitter Emitter-Base Voltage Collector Current Collector Dissipation Storage Temperature Max. Operating Junction Temperature Electrical Characteristics CHARACTERISTICS 0.8 Amperes NPN Silicon Power Transistor 1.0 Watts TO-92 1. Emitter 2. Collector 3. Base 3 1 2 TC=25℃ unless otherwise noted SYMBOL Test Condition Min Typ. Max Unit Collector-Base Breakdown Voltage VCBO IC=500μA, IE=0 700 V Collector-Emitter Breakdown Voltage VCEO IC=1mA, IB=0 400 V Emitter Cut-off Current IEBO VEB=9V,IC=0 10 9 5 ㎂ 38 hFE1 (note) hFE2 VCE=10V,IC=100mA VCE=10V,IC=280mA *Collector-Emitter Saturation Voltage VCE(sat) IC=50mA,IB=10mA IC=100mA,IB=20mA 0.45 1.0 V V *Base-Emitter Saturation Voltage VBE(sat) IC=50mA,IB=10mA IC=100mA,IB=10mA 0.9 1.1 V V *DC Current Gain Cob VCB=10V, f=0.1MHz Current Gain Bandwidth Product fT VCE=10V,IC=0.1A Turn on Time ton Storage Time tstg Output Capacitance Fall Time tF ㎊ 21 ㎒ 4 IB1=IB2=0.16A DUTY CYCLE ≤1% 0.5 ㎲ 4.0 ㎲ 0.7 ㎲ * Pulse Test: Pulse Width≤300μs, Duty Cycle≤2% Note. hFE1 Classification Package Mark information. R 15 ~ 25 O 20 ~ 30 Y 25 ~ 35 S AR 13002 YWW Z R YWW Z Pin connection (ECB) Y; year code, code WW; week code hFE1 Classification ◎ SEMIHOW REV.A1,May 2008 KSB130 002AR Typical Characteristics hFFE, DC Current Gain DC CURRENT GAIN IC[A], Collector Current Power Derating IC[A A], Collector Current Pow wer Derating FACTOR(% %) Safety Operating Area VCE[V], Collector-Emitter Voltage TC[℃], Case Temperature ◎ SEMIHOW REV.A1,May 2008 KSB130 002AR Package Dimension TOTO -92 3.71±0.2 4.58±0.25 3° 4.58±0.25 4° 14.47 7±0.5 0.46±0.1 1 27t 1.27typ 3.6±0.25 1.02±±0.1 3.71±0.225 1.27typ Dimensions in Millimeters ◎ SEMIHOW REV.A1,May 2008 KSB130 002AR Package Dimension W W1 W0 H0 H W2 H1 TOTO -92 TAPING D0 F1 F2 P1 P P2 Dimension [mm] Item Symbol Reference Tolerance Component pitch P 12.7 ±0.5 Side lead to center of feed hole P1 3.85 ±0.5 Center lead to center of feed hole P2 6.35 ±0.5 FI,F2 2.5 +0.2/-0.1 Carrier Tape width W 18.0 +1.0/-0.5 Adhesive tape width W0 6.0 ±0.5 Tape feed hole location W1 9.0 ±0.5 Adhesive tape position W2 Lead pitch 1.0 MAX Center of feed hole to bottom of component H 19.5 ±1 Center of feed hole to lead form H0 16.0 ±0.5 Component height H1 Tape feed hole diameter D0 27.0 max 4.0 ±0.2 ◎ SEMIHOW REV.A1,May 2008