ANAREN A150N50X4B

Model A150N50X4B
Pb
Chip Termination
150 Watts, 50Ω
Description
The A150N50X4B is high performance Aluminum Nitride (AlN) chip
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Features:
• RoHS Compliant
• 150 Watts
• DC - 2.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Resistive Element
Substrate
Terminal Finish
Operating
Temperature
Thick film
AlN Ceramic
Matte Tin over Nickel Barrier
-55 to +200°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms, ± 2%
150 Watts
DC – 2.7 GHz
>26dB to 2.0 GHz
>20dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
A150N50X4 (097) Rev E
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model A150N50X4B
Typical Performance:
Pb
A150N50X4B
A150N50X4B
Power De-rating:
Tape & Reel:
Mounting Footprint and Procedure:
A150N50X4 (097) Rev E
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.