Model D8NAXXY4 Surface Mount Attenuator 8 Watts Description The D8NAXXY4 is high performance Aluminum Nitride (AlN) surface mount attenuator intended as a lower cost alternative to Beryllium Oxide (BeO). The attenuator is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for inter-stage matching, directional couplers, and for use in isolators. General Specifications Features: • RoHS compliant • Low Cost • Surface Mount • Aluminum Nitride Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested Resistive Element Substrate Terminal Finish Operating Temperature Thick film Aluminum Nitride Ceramic Matte Tin over Sulfamate Nickel -55 to +150°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Attenuation Value: Power: Frequency Range: V.S.W.R.: 1 – 6, 9, 10dB 8 Watts DC – 2.0 GHz <1.25:1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing Dimensions given in inches. Rev. 2/23/06 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model D8NAXXY4 Specifications: PART NUMBER ATTENUATION(dB) TOL. (±dB) POWER (WATTS) VSWR FREQ (GHZ) D8NA1Y4 1 0.2 8 1.25:1 2.0 D8N A2Y4 2 0.3 8 1.25:1 2.0 D8N A3Y4 3 0.3 8 1.25:1 2.0 D8N A4Y4 4 0.3 8 1.25:1 2.0 D8N A5Y4 5 0.3 8 1.25:1 2.0 D8N A6Y4 6 0.4 8 1.25:1 2.0 D8N A9Y4 9 0.6 8 1.25:1 2.0 D8N A10Y4 10 0.7 8 1.25:1 2.0 Power De-rating: Tape & Reel: Mounting Footprint and Procedure: USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model D8NAXXY4 Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392