Model C8A50Z4A

Model C8A50Z4A
Surface Mount Termination
8 Watts, 50Ω
Description
The C8A50Z4A is high performance Alumina (Al203) Surface Mount
termination intended as a low cost alternative to Aluminum Nitride (AlN).
The termination is well suited to all cellular frequency bands such as;
AMPS, GSM, DCS, PCS, PHS and UMTS. The termination is also RoHS
compliant!
General Specifications
Features:
Resistive Element
Substrate
Terminal Finish
Operating Temperature
• RoHS Compliant
• 8 Watts
• DC – 6.0 GHz
Thick film
Al2O3 Ceramic
Matte Tin over Nickel Barrier
-55 to +125°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
• Al203 Ceramic
• Non-Nichrome Resistive
Element
Electrical Specifications
50 Ohms, ± 2%
8 Watts
DC – 6.0 GHz
>19 dB
• 100% Tested
Resistance Value:
Power:
Frequency Range:
Return Loss
• Small Size
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
• Low VSWR
Outline Drawing
HATCHED AREA(S) INDICATE
LOCATION OF PLATED SURFACES
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model C8A50Z4A
Typical Performance:
C8A50Z4A
Power De-rating:
C8A50Z4A
Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the
application
Tape and Reel:
2 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392